Hi all just got my self a caddy 1.6 tdi bluemotion that was crash damaged driver side front.
Problem I have is engine will crank over fine but don't start if I spray easy start in the air in-take the van will run for a short second
and cut out my guess is fuel problem is there a cut out switch that might have triggered from the crash hidden some where
thanks Blaster
Doesn't the "car with a key in it" symbol light up on the dash?
Sounds like the immobilizer is preventing start, or the fuse for the fuel pump might be blown.
Sent from my iPhone using Tapatalk
Caddy 2k (e.o.2004) (1.9 TDI(BJB), REMAP 103KW/145PS) Ravenna Blue Passat 3C heated front seats, Premium 3D Color Cluster
Right spent a couple of days sorting out the messy wiring that got rid of 7 faults main problem I'm left with at the moment is no error lights on dash except steering and abs battery was removed but can't reset them till van is running turn engineering over just keeps cranking then after about 1 min of cranking get coil flashing on dash and error on vcds
Mode 7: pending emissions related fault codes
Address 7e8: 1 fault found
P006C - high pressure fuel rail: minimum pressure not reached.
The guy I got van from said he has fitted a new pump and I does look very new will get a vacuum pump tomorrow to see if there is any air in system is there any thing else it could be
Thanks .
blaster1 wrote:Right spent a couple of days sorting out the messy wiring that got rid of 7 faults main problem I'm left with at the moment is no error lights on dash except steering and abs battery was removed but can't reset them till van is running turn engineering over just keeps cranking then after about 1 min of cranking get coil flashing on dash and error on vcds
Mode 7: pending emissions related fault codes
Address 7e8: 1 fault found
P006C - high pressure fuel rail: minimum pressure not reached.
The guy I got van from said he has fitted a new pump and I does look very new will get a vacuum pump tomorrow to see if there is any air in system is there any thing else it could be
Thanks .
There might be a option in VCDS to "bleed" the fuel system, like you can with the brake system.
Haven't come across it though, but haven't looked for it too though to be honest
Sent from my iPhone using Tapatalk
Caddy 2k (e.o.2004) (1.9 TDI(BJB), REMAP 103KW/145PS) Ravenna Blue Passat 3C heated front seats, Premium 3D Color Cluster
Yes there is but I think it only pressureis the tank pump not the high pressure pump . So will try vacuum pump on the system when I get one tomorrow see if I get any air out as I don't want to damage the new hpfp that's been fitted [THUMBS UP SIGN]
2010 Caddy 1.6 cr tdi Bluemotion
engine code: CAY
sent from Samsung Tapatalk
Ok i have fuel in pump i have power 12v on blue and red plug to pump but still getting same fault as above (minimum pressure not reached) does anyone have a wiring flow diagram for this and what other sensors are linked with it any help appreciated
2010 Caddy 1.6 cr tdi Bluemotion
engine code: CAY
sent from Samsung Tapatalk
.