Edition 30 lowered on Rotiforms

colindetail · Post by **colindetail** » Mon Sep 15, 2014 8:54 pm

Hi, new member here, just got the van back from being lowered, bit too low at the back though, rubbed bad on the way home over the bumps. I carry a lot of weight (water tank) in the back and had it lowered with the tank full. Gonna empty the tank tomorrow and see how it sits. I don't wanna be too low so may raise the back a bit instead of lowering the front any more.

LTCKY · Post by **LTCKY** » Tue Sep 16, 2014 7:27 am

Rims really suit the white of edition 30, looks great super low. Definitely bring the back up a hole or two.
Almost went with rotiforms myself but I'm just not low enough.

ansolioo · Post by **ansolioo** » Tue Sep 16, 2014 8:30 am

Sexy!!! Love it

Postman_bat · Post by **Postman_bat** » Tue Sep 16, 2014 9:24 am

That's one sexy mother that is
Just a little higher tho then done
Head down arse up like pleated mini skirts needs raising

Neo · Post by **Neo** » Tue Sep 16, 2014 9:48 am

Very nice indeed. But we need more pictures

torque777 · Post by **torque777** » Tue Sep 16, 2014 3:40 pm

Like that..

colindetail · Post by **colindetail** » Tue Sep 16, 2014 5:48 pm

I've adjusted the ride height now and am going out this evening so i'll try to get a few more pics up later. Cheers for the comments.

MadOne · Post by **MadOne** » Tue Sep 16, 2014 8:00 pm

Very Nice!

What size are those Rotiforms 18" or 19"?

basman · Post by **basman** » Tue Sep 16, 2014 11:59 pm

very slick

trevbwhite · Post by **trevbwhite** » Thu Sep 18, 2014 8:42 pm

now that is awesome!

Amelia · Post by **Amelia** » Thu Sep 18, 2014 9:06 pm

Is it rubbing on the rubber stops if so cut them down mine did this fine now

colindetail · Post by **colindetail** » Mon Sep 22, 2014 8:53 pm

Got it all level now but there is a knocking noise from the offside rear....

Any ideas???

colindetail · Post by **colindetail** » Tue Sep 23, 2014 12:29 pm

AARRRGGGHHH, i've got the dreaded clunking noise on the rear... If it continues unremedied i will have to take the vmaxx kit off. Cant stand that noise.
Checked for abutment around the rear, nothing. Checked all nuts and bolts are tight and noone has any answers.
Anyone???

tramp · Post by **tramp** » Sat Sep 27, 2014 8:57 pm

looking very nice fella

I.D.S. · Post by **I.D.S.** » Sat Sep 27, 2014 9:03 pm

Colin other guys have had knocking noise problems,traced down to exhaust system when going super low on vmax. Loving the Rotorforms

CADDY2K.com

Edition 30 lowered on Rotiforms

Edition 30 lowered on Rotiforms

Re: Edition 30 lowered on Rotiforms

Re: Edition 30 lowered on Rotiforms

Re: Edition 30 lowered on Rotiforms

Re: Edition 30 lowered on Rotiforms

Re: Edition 30 lowered on Rotiforms

Re: Edition 30 lowered on Rotiforms

Re: Edition 30 lowered on Rotiforms

Re: Edition 30 lowered on Rotiforms

Re: Edition 30 lowered on Rotiforms

Re: Edition 30 lowered on Rotiforms

Re: Edition 30 lowered on Rotiforms

Re: Edition 30 lowered on Rotiforms

Re: Edition 30 lowered on Rotiforms

Re: Edition 30 lowered on Rotiforms