When removing paneling what's the best way to cover/fill the screw holes?
I guess I mean the easiest way that's practical and presentable? I don't need them to remove all trace of them, just not to be sharp, rusty or an eyesore.
It's for a Kombi side door and tailgate that have been boarded over. I also need to get my post count up to get into sections to read about audio, cruise control, electric windows, window tinting, adjustable damping and possibly chipping :-)
covering screw holes
-
- 200BHP+
- Posts: 276
- Joined: Mon May 22, 2017 9:04 am
- Engine size/power: 1.6 CR TDI (102bhp)
- Doc
- Not God, just a bellend
- Posts: 18491
- Joined: Thu Jan 01, 1970 1:00 am
- Engine size/power: 2.0TSI EA888 Gen3
- Location: Monaghan, Ireland & Derbyshire, UK
Re: covering screw holes
You could possibly drill the screw hole out a little bit and fit some rivets.
Aluminium pop rivets or plastic push in rivets should suffice.
Aluminium pop rivets or plastic push in rivets should suffice.
2013 Caddy with EA888 Gen3 2.0TSI DSG, Superplus MSP19 , Caddy4 rear lights, Polo GTI (mk7 style) steering wheel, Relentless Tuning front coilovers, Audi A6 S-Line front seats, Boxster fronts & GTI rear Brakes, 3D Colour Premium dash cluster, Caddy life arm rest, Motexion bulkhead, MIB head unit
All posts written by me are the intellectual property of the caddy2K forum and I do not consent to copying or redistribution of any sort
-
- 200BHP+
- Posts: 276
- Joined: Mon May 22, 2017 9:04 am
- Engine size/power: 1.6 CR TDI (102bhp)
Re: covering screw holes
That might work well, the drilling would remove any curled out metal to make the rivet sit flush. I've just done a search and you can get both types in white.