Sub mounting
-
- Caddy2k Groupie
- Posts: 4
- Joined: Wed Jun 14, 2017 7:45 pm
- Engine size/power: 1.2 TSI (84bhp)
Sub mounting
Evenin. Daft question maybe but can I mount my Focal iBus 20 on something rather than to the floor of my 2013? Any suggestions welcome. Cheers guys.
-
- 200BHP+
- Posts: 256
- Joined: Fri Jun 26, 2015 7:13 am
- Engine size/power: 1.8 20V Turbo
- Location: Dorset
- Contact:
Re: Sub mounting
Not really many options. What is the focal ibis like for output? I keep eying it up for my van
Sent from my iPhone using Tapatalk
Sent from my iPhone using Tapatalk
Current Caddy Commerce Pro SWB 120 DSG in Fortana Red
Previous: Caddy Highline SWB 150 DSG in Indium Grey
Previous: Caddy Highline SWB 150 DSG in Indium Grey
-
- Caddy2k Groupie
- Posts: 4
- Joined: Wed Jun 14, 2017 7:45 pm
- Engine size/power: 1.2 TSI (84bhp)
Re: Sub mounting
Pretty sweet but the guy who installed it put it in so the controls are right up against the drivers sill so I cant tune it properly. Hence trying a different method as hes already put two screw holes through the floor...
-
- Caddy2k Groupie
- Posts: 6
- Joined: Thu Jul 27, 2017 10:42 am
- Engine size/power: 1.4 16V Petrol (79bhp)
Re: Sub mounting
If it's just because you can't get too the controls I would personally takenthe screw out, drill them slightly bigger and insert rivnuts. Then you can easily bolt it down after you set gains Ect which once the gain and crossovers are set, you will never have too touch again in all fairness.
I would also add a rubber washer between the floor and the sub. Just too add a little vibration dampening
I would also add a rubber washer between the floor and the sub. Just too add a little vibration dampening
-
- Caddy2k Groupie
- Posts: 4
- Joined: Wed Jun 14, 2017 7:45 pm
- Engine size/power: 1.2 TSI (84bhp)
Re: Sub mounting
Cheers!