Hey guys, I want to reinstall the bulkhead but looking for some tips? I hear it's a half hour job but from what I've seen online (removing it) there are a few torx under the floor which might slow me down.
I've sourced one from a member on here and hope to fit it ASAP (before Xmas would be good lol)
So, any advice greatly appreciated.
Thanks
Installing a bulkhead
-
- Hyper Poster
- Posts: 1005
- Joined: Fri Jul 21, 2017 5:33 pm
- Engine size/power: 1.8 20V Turbo
- tommyzooom
- Hyper Poster
- Posts: 6530
- Joined: Fri Apr 10, 2009 11:37 pm
- Engine size/power: 1.6 CR TDI (102bhp)
- Location: Donegal
Re: Installing a bulkhead
No bolts under the floor.some at the base of the bulkhead.
Install the middle bar with 2 bolts first, then the 2 halves of the bulkhead have 3 bolts at each side, and 3 along the top, and 3 plastic nuts up the centre.
Install the middle bar with 2 bolts first, then the 2 halves of the bulkhead have 3 bolts at each side, and 3 along the top, and 3 plastic nuts up the centre.
My Website
My Instagram
""Don't want to meet your daddy, just want you in my Caddy"" André 3000 (2003)
My Instagram
""Don't want to meet your daddy, just want you in my Caddy"" André 3000 (2003)
-
- Hyper Poster
- Posts: 1005
- Joined: Fri Jul 21, 2017 5:33 pm
- Engine size/power: 1.8 20V Turbo
Re: Installing a bulkhead
You make it sound so simple, thanks mate