Touran loom into a caddy

Random Caddy chat.
Not the place for sale or wanted topics.
User avatar
paul4314
Hyper Poster
Posts: 842
Joined: Sun Mar 02, 2014 9:07 am
Engine size/power: 1.9 TDI (104bhp)
Location: surrey london

Touran loom into a caddy

Post by paul4314 »

Has anyone fitted a completed touran loom into a caddy
Basically caddy was fully stripped
Bought a donor touran and fitted everything from a touran
Just getting to wiring up the sliding door and rear doors and rear lights
Has anyone done this or could help with the pin outs please
As touran had rear doors and electric windows and so on caddy just needs central locking and the interior light switch

Thanks for any help
User avatar
paul4314
Hyper Poster
Posts: 842
Joined: Sun Mar 02, 2014 9:07 am
Engine size/power: 1.9 TDI (104bhp)
Location: surrey london

Re: Touran loom into a caddy

Post by paul4314 »

No one got any advice
User avatar
Doc
Not God, just a bellend
Posts: 18445
Joined: Thu Jan 01, 1970 1:00 am
Engine size/power: 2.0TSI EA888 Gen3
Location: Monaghan, Ireland & Derbyshire, UK

Re: Touran loom into a caddy

Post by Doc »

There are sooo many variables, this subject is a bottomless hole.
What generation Touran are you using as a doner?
What generation Caddy are you building?
SWB or maxi, twin door or tailgate?
Single or double sliding door?

Your best option is to get a copy of ELSAwin and compare the wiring diagrams for rear/side doors and tail lights as these are all different. The fuel pump is in a different location so those wires will need diverting. A-pillar forward is probably about all that is the same between the two.
Image
Image
2013 Caddy with EA888 Gen3 2.0TSI DSG, Superplus MSP19 , Caddy4 rear lights, Polo GTI (mk7 style) steering wheel, Relentless Tuning front coilovers, Audi A6 S-Line front seats, Boxster fronts & GTI rear Brakes, 3D Colour Premium dash cluster, Caddy life arm rest, Motexion bulkhead, MIB head unit


All posts written by me are the intellectual property of the caddy2K forum and I do not consent to copying or redistribution of any sort
User avatar
paul4314
Hyper Poster
Posts: 842
Joined: Sun Mar 02, 2014 9:07 am
Engine size/power: 1.9 TDI (104bhp)
Location: surrey london

Re: Touran loom into a caddy

Post by paul4314 »

Ok thanks i did have elswin but stopped working said it was an unlicensed version got like 8 cds from a ebay seller stitched up

Touran is a 2008-2009 version
Caddy is a standard swb

Caddys all up and running just literally trying get sliding door centrol locking and rear door central locking and rear lights. Working other than that all is
Working

Doesn’t help there was no wiring in the caddy
Gazjones
Caddy2k Groupie
Posts: 2
Joined: Wed May 23, 2018 9:14 pm
Engine size/power: 1.9 TDI (104bhp)

Re: Touran loom into a caddy

Post by Gazjones »

I have done this with a 2008 caddy, transplanted a 2.016v Tdi with the main Touran loom, climate control the lot.
I had issues with the rear side doors and rear door, on a barn door style van.
I reverted to the caddy central locking ecu and used the wiring from the original caddy loom to go where it used to go, so basically changed the Touran wiring going to the ecu to make it how the caddy was for that ecu.
And I just connected the caddy light loom to the Touran one behind the passenger seat area along with the abs wiring.
Post Reply