Vito 17" wheel fitment.
-
- Twin Turbo poster
- Posts: 331
- Joined: Sun Dec 20, 2015 5:36 pm
- Engine size/power: 2.0 CR TDI (108bhp)
Vito 17" wheel fitment.
Just picked up a set if wheels they are et38 is anyone else running these without spacers. They've got 225 45 17 tyres on them. I've got the spigot rings
- NZDubNurd
- Hyper Poster
- Posts: 643
- Joined: Fri Oct 24, 2014 3:39 am
- Location: Whangarei, New Zealand
Re: Vito 17" wheel fitment.
Can you post the part number, and maybe the width (I think 17"x6.5?) etc - all stamped on the front face usually.
You probably won't want spacers on, as they'll poke out a little bit anyway - they also come in ET50, and yours will already be 12mm more pokey than them.
You probably won't want spacers on, as they'll poke out a little bit anyway - they also come in ET50, and yours will already be 12mm more pokey than them.
-
- Twin Turbo poster
- Posts: 331
- Joined: Sun Dec 20, 2015 5:36 pm
- Engine size/power: 2.0 CR TDI (108bhp)
-
- Twin Turbo poster
- Posts: 331
- Joined: Sun Dec 20, 2015 5:36 pm
- Engine size/power: 2.0 CR TDI (108bhp)
Re: Vito 17" wheel fitment.
Hope this helps . I'm hoping they fit straight on
- NZDubNurd
- Hyper Poster
- Posts: 643
- Joined: Fri Oct 24, 2014 3:39 am
- Location: Whangarei, New Zealand
Re: Vito 17" wheel fitment.
Thanks
They are Alcar model 9787, I think more commonly found on the Merc GLA. Equivalent of Merc part number A1564000000
They stick out about 12mm more than the (optional? maxi?) 16"x6.5" caddy steel wheels, so are a bit more flush looking. They're a pretty good offset for that.
With spigot rings, they should be a direct fit. I *think* you can use the standard caddy wheel bolts - just check the radius is correct for the wheels, and torque them properly.
I have a "thing" for steels...
These are a slightly different style 17x7 ET45, with 215/50R17 (a little taller than normal, but my Touran is slightly lifted):
your 6.5 ET38's should stick out about 1mm more You'll probably want a 205/50R17 for "correct" sizing.
Make sure to post a pic of them fitted!!!
They are Alcar model 9787, I think more commonly found on the Merc GLA. Equivalent of Merc part number A1564000000
They stick out about 12mm more than the (optional? maxi?) 16"x6.5" caddy steel wheels, so are a bit more flush looking. They're a pretty good offset for that.
With spigot rings, they should be a direct fit. I *think* you can use the standard caddy wheel bolts - just check the radius is correct for the wheels, and torque them properly.
I have a "thing" for steels...
These are a slightly different style 17x7 ET45, with 215/50R17 (a little taller than normal, but my Touran is slightly lifted):
your 6.5 ET38's should stick out about 1mm more You'll probably want a 205/50R17 for "correct" sizing.
Make sure to post a pic of them fitted!!!
- NZDubNurd
- Hyper Poster
- Posts: 643
- Joined: Fri Oct 24, 2014 3:39 am
- Location: Whangarei, New Zealand
Re: Vito 17" wheel fitment.
Oh yeah, there is a direct fit VW wheel for the Tiguan too (without spigot rings)... same dimensions as yours, but they seem very rare. Also very expensive from VW (here in NZ anyway) - nearly double what the Mercedes Dealer chares for the Vito ET50 steels!
-
- Twin Turbo poster
- Posts: 331
- Joined: Sun Dec 20, 2015 5:36 pm
- Engine size/power: 2.0 CR TDI (108bhp)
Re: Vito 17" wheel fitment.
Thankyou really helpful . Will put pictures on when there fittedNZDubNurd wrote: ↑Thu Nov 22, 2018 8:23 am Thanks
They are Alcar model 9787, I think more commonly found on the Merc GLA. Equivalent of Merc part number A1564000000
They stick out about 12mm more than the (optional? maxi?) 16"x6.5" caddy steel wheels, so are a bit more flush looking. They're a pretty good offset for that.
With spigot rings, they should be a direct fit. I *think* you can use the standard caddy wheel bolts - just check the radius is correct for the wheels, and torque them properly.
I have a "thing" for steels...
These are a slightly different style 17x7 ET45, with 215/50R17 (a little taller than normal, but my Touran is slightly lifted):
your 6.5 ET38's should stick out about 1mm more You'll probably want a 205/50R17 for "correct" sizing.
Make sure to post a pic of them fitted!!!
-
- Twin Turbo poster
- Posts: 331
- Joined: Sun Dec 20, 2015 5:36 pm
- Engine size/power: 2.0 CR TDI (108bhp)
Re: Vito 17" wheel fitment.
Perfect looks like I got a bargain for 250 all inNZDubNurd wrote: ↑Thu Nov 22, 2018 8:27 am Oh yeah, there is a direct fit VW wheel for the Tiguan too (without spigot rings)... same dimensions as yours, but they seem very rare. Also very expensive from VW (here in NZ anyway) - nearly double what the Mercedes Dealer chares for the Vito ET50 steels!
-
- Twin Turbo poster
- Posts: 331
- Joined: Sun Dec 20, 2015 5:36 pm
- Engine size/power: 2.0 CR TDI (108bhp)
- NZDubNurd
- Hyper Poster
- Posts: 643
- Joined: Fri Oct 24, 2014 3:39 am
- Location: Whangarei, New Zealand
Re: Vito 17" wheel fitment.
Sounds like it! (I can't say what mine cost, in public - my Mrs might see!
-
- Twin Turbo poster
- Posts: 331
- Joined: Sun Dec 20, 2015 5:36 pm
- Engine size/power: 2.0 CR TDI (108bhp)
Re: Vito 17" wheel fitment.
PMSL yep mine cost 50 quid as well if anyone called Helen asks
- NZDubNurd
- Hyper Poster
- Posts: 643
- Joined: Fri Oct 24, 2014 3:39 am
- Location: Whangarei, New Zealand
Re: Vito 17" wheel fitment.
HAHAHA! I have to remember that one.
Me and my best mate have a deal - which ever one of us lasts the longest has to clean out the others garage: keep what you want, and sell the rest for what it's worth, NOT what we told them we paid for the stuff
- torque777
- Hyper Poster
- Posts: 5377
- Joined: Wed May 28, 2014 12:47 pm
- Engine size/power: 1.4 16V Petrol (79bhp)
- Location: Shropshire
Re: Vito 17" wheel fitment.
I have alcar Vito 17x7 et50 on mine with 225/50/17 and I think they fit just right
Sent from my LYA-L29 using Tapatalk
Sent from my LYA-L29 using Tapatalk
- mark1a
- Hyper Poster
- Posts: 731
- Joined: Mon Jan 16, 2017 7:34 pm
- Location: Dorset, UK
Re: Vito 17" wheel fitment.
My will says “please do not sell my cameras & bikes for what you think I paid for them”
2017 Blackberry Maxi Life 190TDI 6MT OEM+
Santiago 18” | OE Xenons | Limo tints | Wind deflectors
Remap 190bhp | H&R / Darkside lowering | TRC front & rear splitter | RKD side skirts
Android HU | Focal 2.1+2 audio | Dynamat | 4G WiFi | Wireless phone charge
Build thread here http://caddy2k.com/forum/viewtopic.php?f=13&t=34095
Santiago 18” | OE Xenons | Limo tints | Wind deflectors
Remap 190bhp | H&R / Darkside lowering | TRC front & rear splitter | RKD side skirts
Android HU | Focal 2.1+2 audio | Dynamat | 4G WiFi | Wireless phone charge
Build thread here http://caddy2k.com/forum/viewtopic.php?f=13&t=34095
-
- Caddy2k Groupie
- Posts: 1
- Joined: Wed May 27, 2020 9:00 pm
- Engine size/power: 1.6 CR TDI (102bhp)
Re: Vito 17" wheel fitment.
So did you use 7j17et50 ?