I ordered this off the bay
My question is, will this be enough to do all/most of my Caddy?
I was planning to start in the rear and work my way to the cabin area
Sent from my iPhone using Tapatalk
Sound deadening?
- LS Spark
- 100BHP+
- Posts: 138
- Joined: Sat Apr 06, 2019 12:26 am
- Engine size/power: 2.0 TDI (140bhp)
- Location: Bournemouth
Sound deadening?
Gloss Black Badges, ‘KillAllWipers’ Delete, Van-X tinted HL brake lens, Van-X glove box, Van-X smoked side repeaters
-
- Twin Turbo poster
- Posts: 340
- Joined: Thu Feb 14, 2013 3:36 pm
- Engine size/power: 1.0 TSI (100bhp)
Re: Sound deadening?
Hi mate
To be honest it won't do whole van well depending on how well you do van ie side panel roof floors and doors if so you will have no where near enough the floor is like 16 sqf mate
To be honest it won't do whole van well depending on how well you do van ie side panel roof floors and doors if so you will have no where near enough the floor is like 16 sqf mate
- LS Spark
- 100BHP+
- Posts: 138
- Joined: Sat Apr 06, 2019 12:26 am
- Engine size/power: 2.0 TDI (140bhp)
- Location: Bournemouth
Re: Sound deadening?
I thought as much. I don’t wanna do a half assed effort. I’ll get another couple of boxes or is there a cheaper way ie bulk buying?gjseb wrote:Hi mate
To be honest it won't do whole van well depending on how well you do van ie side panel roof floors and doors if so you will have no where near enough the floor is like 16 sqf mate
Sent from my iPhone using Tapatalk
Gloss Black Badges, ‘KillAllWipers’ Delete, Van-X tinted HL brake lens, Van-X glove box, Van-X smoked side repeaters
-
- 100BHP+
- Posts: 188
- Joined: Fri Jul 24, 2015 12:32 pm
- Engine size/power: 2.0 CR TDI (138bhp)
Re: Sound deadening?
I've almost finished sound deadening my SWB caddy.
So far I've used 50 sheets of silent coat 2mm and 23 sheets of 4mm.
The 2mm sheets are 375 x 270mm = 5.06 sq m
The 4mm sheets are 375 x 265mm = 2.28 sq m
I've just order more, (23 sheets 4mm, 20 sheets 2mm) but I (will) have pretty much total coverage of floor, sides and roof including cab area. Inner and outer door skins and any accessible areas where I can get my hands in.
In total I will have used around 11 sq m or 118 sq ft.
So far I've used 50 sheets of silent coat 2mm and 23 sheets of 4mm.
The 2mm sheets are 375 x 270mm = 5.06 sq m
The 4mm sheets are 375 x 265mm = 2.28 sq m
I've just order more, (23 sheets 4mm, 20 sheets 2mm) but I (will) have pretty much total coverage of floor, sides and roof including cab area. Inner and outer door skins and any accessible areas where I can get my hands in.
In total I will have used around 11 sq m or 118 sq ft.
Last edited by Cailsey on Thu May 30, 2019 9:02 pm, edited 1 time in total.
- LS Spark
- 100BHP+
- Posts: 138
- Joined: Sat Apr 06, 2019 12:26 am
- Engine size/power: 2.0 TDI (140bhp)
- Location: Bournemouth
Re: Sound deadening?
That’s really useful to know, cheers. So your sheets are bigger?
I’ll have a search options
Where have you used the 4mm?
Sent from my iPhone using Tapatalk
I’ll have a search options
Where have you used the 4mm?
Sent from my iPhone using Tapatalk
Gloss Black Badges, ‘KillAllWipers’ Delete, Van-X tinted HL brake lens, Van-X glove box, Van-X smoked side repeaters
-
- 100BHP+
- Posts: 188
- Joined: Fri Jul 24, 2015 12:32 pm
- Engine size/power: 2.0 CR TDI (138bhp)
Re: Sound deadening?
Yes, the sheets are twice the size of the ones you bought, so they work out about the same price per sq m.
Silent Coat is available in half size sheets too - the same size as the ones you bought. Before you buy a bulk box, do check the sheet size. I nearly bought the wrong ones...….
I've used 4mm on the rear wheel arches, the load floor and inside the outer door skins on the front doors. It surprising how much you can use if you go for maximum coverage.
I may also use 4mm for the cab floor when I get round to doing that. I'd also recommend getting some aluminium foil tape to cover joins - especially over the arches as they can become a bit of a patchwork and the butyl adhesive is really tacky.
I used a quality pair of scissors to cut sheets to size, the squares really help with guesstimating the size/shape. I found using the handle of the scissors and the handle of the roller to be great for smoothing the material into curves .
To be honest, I've gone a bit OTT with mine.
Silent Coat is available in half size sheets too - the same size as the ones you bought. Before you buy a bulk box, do check the sheet size. I nearly bought the wrong ones...….
I've used 4mm on the rear wheel arches, the load floor and inside the outer door skins on the front doors. It surprising how much you can use if you go for maximum coverage.
I may also use 4mm for the cab floor when I get round to doing that. I'd also recommend getting some aluminium foil tape to cover joins - especially over the arches as they can become a bit of a patchwork and the butyl adhesive is really tacky.
I used a quality pair of scissors to cut sheets to size, the squares really help with guesstimating the size/shape. I found using the handle of the scissors and the handle of the roller to be great for smoothing the material into curves .
To be honest, I've gone a bit OTT with mine.
Last edited by Cailsey on Thu May 30, 2019 9:04 pm, edited 1 time in total.
- LS Spark
- 100BHP+
- Posts: 138
- Joined: Sat Apr 06, 2019 12:26 am
- Engine size/power: 2.0 TDI (140bhp)
- Location: Bournemouth
Re: Sound deadening?
Where did you order larger sheets from?
I am going to try and cover as much as poss and it may work out easier with larger sheet. Did you have much wastage?
I am going to try and cover as much as poss and it may work out easier with larger sheet. Did you have much wastage?
Gloss Black Badges, ‘KillAllWipers’ Delete, Van-X tinted HL brake lens, Van-X glove box, Van-X smoked side repeaters
- Splitty66
- Caddy2k Groupie
- Posts: 8
- Joined: Wed Aug 01, 2018 11:01 pm
- Engine size/power: 2.0 TDI (140bhp)
Re: Sound deadening?
I've just finished my cab floor and got carried away .... used approx 7 mtr square. Its deffo worth the effort but easy to become obsessed with covering every bit of paint in sight hahahha
Sent from my SM-G955F using Tapatalk
Sent from my SM-G955F using Tapatalk
-
- Caddy2k Groupie
- Posts: 21
- Joined: Tue May 28, 2019 7:57 pm
- Engine size/power: 1.6 CR TDI (102bhp)
Re: Sound deadening?
I’ve only done one arch of my VW caddy maxi and used 10 sheets!
-
- Caddy2k Groupie
- Posts: 3
- Joined: Sat Jun 15, 2019 11:27 am
- Engine size/power: 2.0 SDI (70bhp)
- Location: Halifax, West Yorks
Re: Sound deadening?
@Splitty66
looks like a quality job though (y) have you got an estimate of how much the whole van cost to cover?
looks like a quality job though (y) have you got an estimate of how much the whole van cost to cover?
Last edited by dan@biali on Wed Jun 19, 2019 10:44 pm, edited 1 time in total.
Reason: removed unnecessary quote
Reason: removed unnecessary quote
I’m Nick and I own a Caddy.
2007 ex-British Gas 2.0 SDI, very simple but I kind of need that I’m so new to driving. Would like to learn about the horses under the hood because it all looks so fun.
2007 ex-British Gas 2.0 SDI, very simple but I kind of need that I’m so new to driving. Would like to learn about the horses under the hood because it all looks so fun.