What did you do to your van today?

Ricksy1121 · Post by **Ricksy1121** » Thu Jan 18, 2018 6:31 pm

Celticrsmith wrote: ↑Thu Jan 18, 2018 2:45 pm Yes it was a standard one. They looked like the corners would've snapped if I'd pulled it too hard. I may carpet it one day now I know they just pop out.

Get a cheap trim tool kit off eBay, will make it loads easier. You pry the first part of the clip out and it releases the main body of the clip from the car

Barbel330 · Post by **Barbel330** » Thu Jan 18, 2018 6:52 pm

New

️

️ arrived

Sent from my iPhone using Tapatalk

james400 · Post by **james400** » Thu Jan 18, 2018 6:55 pm

Barbel330 wrote:New ️️️ arrived

Sent from my iPhone using Tapatalk

Thay off a Porsche?

Sent from my SM-G925F using Tapatalk

Barbel330 · Post by **Barbel330** » Thu Jan 18, 2018 6:58 pm

Porsche Cayenne, Audi Q7, VW Toureg

Celticrsmith · Post by **Celticrsmith** » Thu Jan 18, 2018 7:00 pm

Philfab wrote: ↑Thu Jan 18, 2018 4:59 pm Today i fitted some new (to me) seats.

Story is: Down the road theres a family that have a pair of lovely Audi RS3's. they're forever cleaning and changing bits.
So while walking past with the dog i notice theres a pair of seats on the lawn, quick knock on the door, Seats are now mine and free.

So put them into today, however, they match up with the floor pan bolt holes perfectly but not the original seat frames.
Not even the front bolt holes match so no chance of breaking the drill out for the rear either.
This weekend will be spent with a grinder and a welder making some slight adjustments,
Currently driving around barley able to see over the steering wheel.

Seriously?! Get some piccies up mate!! Well done too. Shame you're not 7ft tall lol

anoneamus · Post by **anoneamus** » Thu Jan 18, 2018 7:11 pm

Paul9616 wrote: ↑Mon Jan 15, 2018 5:41 pm I haven't as I bought these off eBay - Deutschparts. I know that they do have them under the useful parts numbers on the forum.

Couldn't find them there, but did a little bit of sleuthing on the net. Eventually found a photo of one on a T6 forum and loaded it into the computer, said "enhance", squinted a bit and got the part number. From there could get the others:

7E0949101D9B9 - Left (black)
7E0949102D9B9 - Right (black)
7E0949101A - Left (chrome)
7E0949102A - Right (chrome)

Happy to modify lights, but the car not so much. Thanks for the tip!

Philfab · Post by **Philfab** » Thu Jan 18, 2018 7:17 pm

Celticrsmith wrote: ↑Thu Jan 18, 2018 7:00 pm Seriously?! Get some piccies up mate!! Well done too. Shame you're not 7ft tall lol

I know right, im 6ft, the bulkheads removed too and yet it is low.
The seats themselves have the height adjust and are at max. They also have electric adjustments but will wire them in once im happy with the height.
Will put pics up over the weekend.

Caddyluv · Post by **Caddyluv** » Thu Jan 18, 2018 7:23 pm

Barbel330 wrote:New ️️️ arrived

Sent from my iPhone using Tapatalk

Oi I paid for them, they are to big. Are they heavier or lighter than mine.

Sent from my iPhone using Tapatalk

Barbel330 · Post by **Barbel330** » Thu Jan 18, 2018 7:28 pm

Lighter

but the discs are heavier.

Caddyluv · Post by **Caddyluv** » Thu Jan 18, 2018 7:30 pm

So the same you think then. Just will stop better. You know your fly through the windscreen just pulling up to the traffic lights.

Sent from my iPhone using Tapatalk

Ricksy1121 · Post by **Ricksy1121** » Thu Jan 18, 2018 9:01 pm

Caddyluv wrote: ↑Thu Jan 18, 2018 7:23 pm Oi I paid for them, they are to big. Are they heavier or lighter than mine.

Sent from my iPhone using Tapatalk

I thought the r32 ones looked big when they arrived, they will look ace when on. What’s the minimum wheel size for them?

Barbel330 · Post by **Barbel330** » Thu Jan 18, 2018 9:08 pm

Caddyluv · Post by **Caddyluv** » Thu Jan 18, 2018 9:14 pm

I just got some R32 ones.

Sent from my iPhone using Tapatalk

J_Con · Post by **J_Con** » Thu Jan 18, 2018 9:21 pm

Sandyson wrote:RyanG I ordered this one https://www.ebay.co.uk/itm/201980647835 it’s been brilliant works with the rear parking sensors etc. Only trouble is I already had a Bluetooth module installed and the head unit has one built it so I have two at the moment need to disable the module.

Sent from my iPhone using Tapatalk

Was this a straight fit mate? And what year was your caddy?

Sent from my Pixel using Tapatalk

Sandyson · Post by **Sandyson** » Thu Jan 18, 2018 9:43 pm

Mines a 2012 so a facelift model. Yep pop the surround off take 4 torx screws out lift up the little release for the quad lock, then just swap the units. The adapter for the Ariel was slightly wrong as the clips weren’t needed so I trimmed them off to make it all connect up. I think the whole thing took 20 mins. They sell it as compatible with older models but say it may need a canbus gateaway update. Works well with my 2012 van.

Sent from my iPhone using Tapatalk

CADDY2K.com

What did you do to your van today?

Re: What did you do to your van today?

Re: What did you do to your van today?

Re: What did you do to your van today?

Re: What did you do to your van today?

Re: What did you do to your van today?

Re: What did you do to your van today?

Re: What did you do to your van today?

Re: What did you do to your van today?

Re: What did you do to your van today?

Re: What did you do to your van today?

Re: What did you do to your van today?

Re: What did you do to your van today?

Re: What did you do to your van today?

Re: What did you do to your van today?

Re: What did you do to your van today?