CADDY2K.com

Caddyluv wrote: ↑Mon Nov 19, 2018 8:13 am @mark1a I have got the wife to put her foot on the break. But the brightness I don’t think it’s different. Just the light colour is. So it feels different. I’m say no there isn’t any brightness difference.

OK thanks Ryan

Once I’ve found a solution for the 3rd brake light you can probably have this one. As you say it will look better on the Blackburry defo.


Sent from my iPhone using Tapatalk

I have used Lamin-x film to tint the rear lights on my previous car. This might be an option, but its hard to tell from the pictures which shade you may need. I have used 6% and it gave me nice dark-ish red.
https://www.funkmotorsport.com/product- ... -x-sheets/

Caddyluv wrote:Once I’ve found a solution for the 3rd brake light you can probably have this one. As you say it will look better on the Blackburry defo.


Sent from my iPhone using Tapatalk

Thanks for the offer, but I have a tailgate not barn doors, so I expect fit is different.




Sent from my iPhone using Tapatalk

@mark1a

Yeah it is. I forgot, I did know that. Soz

@Giddy
I have thought about film. I have a couple of issues with that.

1 over time it will Matt and need replacement time and time again.

2 the shade will be total guess work.

3 I only need 1 inch x 3 inch bit.

So what I’m possibly looking at is putting some black paint in so gloss to tint it that way so it stays glossy and I can keep it glossy.


Sent from my iPhone using Tapatalk

So replace my subframe bolts today hopefully it sorts out the clunk.




Sent from my iPhone using Tapatalk

What's the undertray from? Any part numbers? Thx

It’s for a caddy 4 it's 2K5825453


Sent from my iPhone using Tapatalk

Been having a little trouble with my folding caddy life mirrors, since I done the LEDs in the door cards. I guess it was when I took the plugs out the module. They were working fine on the switch but intermittent on the key. So I thought I would see if I opened and closed them, relearn like you do with the windows. So I did it 3 times. So far works amazing has done for 4 days now. I don’t know if this is common knowledge but it’s worked for me.


Sent from my iPhone using Tapatalk

Done couple things today. Before lunch.

Silicon hose between bulkhead and B pillar stop the new squeak. Hidden away fingers crossed.

Tinted rear reflectors fitted. Soooooooo much dirt. That must of saved some MPG.

Done few stone chips on the front. Not a lot today but those fussy little things you want to do but can’t be arsed.


Sent from my iPhone using Tapatalk

So as you know I put in a van x third break light and I didn’t like it. To black didn’t look like the factory rear lights. So today I got some smokey tint.

First go I used the heat method. It left micro bubbles. So I used the soapy water method with heat. Which worked better.


If you look close on the finish edge. Just left it to cool and it’s stuck the edges properly.




Sent from my iPhone using Tapatalk

looks good ryan

So today thought I would use my Xmas pressy.

Started with snow foaming then soft mit wash.


Then upol the panels. Then took all day 3 stage polishing the van with two coats of HD Autoglym the two coats of Autoglym shine protection.



Sent from my iPhone using Tapatalk

oooh shiney

It is isn’t it. Need to do roof that’s all that’s left to do.


Sent from my iPhone using Tapatalk