Touran door cards fitting advice.
-
- Caddy2k Groupie
- Posts: 30
- Joined: Sat Jan 24, 2015 11:24 am
- Engine size/power: 1.2 TSI (84bhp)
- Location: West Midlands
Touran door cards fitting advice.
What's the best way to trim touran door cards? Stanley knife? Thanks.
- Doc
- Not God, just a bellend
- Posts: 18487
- Joined: Thu Jan 01, 1970 1:00 am
- Engine size/power: 2.0TSI EA888 Gen3
- Location: Monaghan, Ireland & Derbyshire, UK
Re: Touran door cards fitting advice.
I'd go with a Dremel.
Inside curves are quite difficult to do with a Stanley knife and if you slip you'll screw up the bit you are gonna be looking at forever.
Inside curves are quite difficult to do with a Stanley knife and if you slip you'll screw up the bit you are gonna be looking at forever.
2013 Caddy with EA888 Gen3 2.0TSI DSG, Superplus MSP19 , Caddy4 rear lights, Polo GTI (mk7 style) steering wheel, Relentless Tuning front coilovers, Audi A6 S-Line front seats, Boxster fronts & GTI rear Brakes, 3D Colour Premium dash cluster, Caddy life arm rest, Motexion bulkhead, MIB head unit
All posts written by me are the intellectual property of the caddy2K forum and I do not consent to copying or redistribution of any sort
-
- Caddy2k Groupie
- Posts: 30
- Joined: Sat Jan 24, 2015 11:24 am
- Engine size/power: 1.2 TSI (84bhp)
- Location: West Midlands
-
- Caddy2k Groupie
- Posts: 29
- Joined: Wed Apr 22, 2015 3:49 pm
- Engine size/power: 1.0 TSI (100bhp)
Re: Touran door cards fitting advice.
If you find the dremel is too fast, a bosch Oscillating Cutter with a half moon shape bit might be good. I've used it to cut plastic, and it worked great.
vw caddy 1.9tdi c20 - 2008(58)
- Winst
- Hyper Poster
- Posts: 619
- Joined: Wed Jul 17, 2013 10:19 pm
- Engine size/power: 2.0 CR TDI (138bhp)
- Location: Lake District
Re: Touran door cards fitting advice.
Make a template out of cardboard or something mate, as Doc says if you mark it you will notice it all the time, my first set was done with a Stanley knife, bugged the hell out of me until I bought some others, I used a dremmel, just took a little off until I was happy with it.
2011 2.0tdi Full 2018 front and rear ends fitted, airlift 3P suspension, 20" alloys, modified Porsche calipers front and rear with R8 handbrake caliper, Audi RS4 wingbacks, covered in nappa leather and alcantara, Touran dash, door cards, centre console all trimmed in leather and alcantara, MFSW, 3D cluster, Rockford fosgate and focal sounds with MIB2, bi xenons, full alltrack kit fitted, etc etc:D
Instagram @2kwayne
Instagram @2kwayne
-
- Caddy2k Groupie
- Posts: 30
- Joined: Sat Jan 24, 2015 11:24 am
- Engine size/power: 1.2 TSI (84bhp)
- Location: West Midlands