SRS Automotive 300+bhp BKD #Racevan - Ex Darkside Developments

Show off your caddy
Mayor West
Caddy Fan
Posts: 85
Joined: Tue Jul 08, 2014 12:02 am
Engine size/power: 1.4 16V Petrol (74bhp)

SRS Automotive 300+bhp BKD #Racevan - Ex Darkside Developments

Post by Mayor West »

Most of this has been ripped from Edition38 so some posts may not make much sense.

Iv'e owned the van for a few years now, I got it from Ryan at Darkside Developments so it was pretty sorted when I got it.

Here is the thread he made on here when it was 1st built:

viewtopic.php?f=13&t=7192&p=62407&hilit=ryanp#p62407" onclick="window.open(this.href);return false;" onclick="window.open(this.href);return false;" onclick="window.open(this.href);return false;" onclick="window.open(this.href);return false;" onclick="window.open(this.href);return false;"

When I bought the van the fat 5's had been sold. The fat 5's width, offset & TT wide track didn't work well together on this so had been swapped for some S4 wheels which fitted much better.

I drove it like this for a short period but needed to change some bit's I wasn't too sure of, I bought some new wheels to try but these never went any further than the picture below as I had better plans.

Image

These looked ok in my opinion but I wanted a more motorsport wheel, as I had already picked the new graphics for the van.

After a late night google session I found the inspiration needed.

Image

And this is what we came up with.

Image

These were the wheels of choice, 8x18 Compomotive TH with 225 40 18 Uniroyal Rainsport 3's.

Image

A few from the dyno after a turbo upgrade.

Image

Image

Results.

Image

After this I changed the front seats as the Scirocco ones didn't seem to hold you in as well as the replacements, plus I had 3 sets of FR seat's in stock at the time.

Image

I added an AUX input too.

Image

It's been like this for well over a year now but I have more changes planned as I go more "race mode" with it.


New wheels purchased.

Image

Image

Mock face mount.

Image

Painted & Rebuilt.

Image

Bought some new seats & brakes too.

Image

Image

We made some bases as I'm a tight bugger I didn't want to buy the ones from Corbeau at £80 each. Plus we had some MK5 seats in stock that weren't worth selling so they got the chop.

Image

I still haven't got the BBS fitted as we've been doing some things with the rear suspension which should be good (And hopefully finished in the next few weeks) so the adapters couldn't be made until this was done.

Image

While the rear suspension thing has been going on I got sent some rear leaf spring bushes to try which came in nicely just before VAG Tuner track day at Donington which I had booked on at.
We fitted these which seemed to tighten the rear end up and also sent the GAZ rear shocks off for a rebuild as they were goosed.

Image

Image

Image

We also did some bits under the bonnet too before VAG Tuner. Fitted a new air filter & a Mann & Hummel catch can.

Image

Image

We also fitted a bigger intercooler too as the other had a slight leak.

Image

We made these too but when we came to fit them I realised they wouldn't fit the TT hubs :( these came from a MK5 as I had some spares in stock.

Image

Image

Image

Image

Didn't get any videos from VAG Tuner as I never turned the camera on :(

Got some pics though.

Image

Image

Image

Image

Image

The next updates should be of the new rear suspension set up which Iv'e been eager to fit for far too long.
Last edited by Mayor West on Wed Aug 03, 2016 4:17 pm, edited 2 times in total.
User avatar
torque777
Hyper Poster
Posts: 5377
Joined: Wed May 28, 2014 12:47 pm
Engine size/power: 1.4 16V Petrol (79bhp)
Location: Shropshire

Re: SRS Automotive #Racevan - Ex Darkside Developments

Post by torque777 »

Looks great..can you tell me the exact symptoms that lead to the diagnosis of leaking intercooler please?
BowieStare
Caddy2k Groupie
Posts: 17
Joined: Thu Jul 07, 2016 8:11 pm
Engine size/power: 1.0 TSI (100bhp)
Location: Highland, Scotland

Re: SRS Automotive #Racevan - Ex Darkside Developments

Post by BowieStare »

sweet racevan.
Mayor West
Caddy Fan
Posts: 85
Joined: Tue Jul 08, 2014 12:02 am
Engine size/power: 1.4 16V Petrol (74bhp)

Re: SRS Automotive #Racevan - Ex Darkside Developments

Post by Mayor West »

torque777 wrote:Looks great..can you tell me the exact symptoms that lead to the diagnosis of leaking intercooler please?
We were doing some tuning tweaks and couldn't get it 100% right and smoke was more than expected so we checked for boost leaks and it turned out to be the intercooler, not the pipes as expected. :)
Mayor West
Caddy Fan
Posts: 85
Joined: Tue Jul 08, 2014 12:02 am
Engine size/power: 1.4 16V Petrol (74bhp)

Re: SRS Automotive #Racevan - Ex Darkside Developments

Post by Mayor West »

BowieStare wrote:sweet racevan.
Thanks :)
User avatar
Doc
Not God, just a bellend
Posts: 18445
Joined: Thu Jan 01, 1970 1:00 am
Engine size/power: 2.0TSI EA888 Gen3
Location: Monaghan, Ireland & Derbyshire, UK

Re: SRS Automotive #Racevan - Ex Darkside Developments

Post by Doc »

Welcome Stefan, wicked van.
Was good chatting to you at Donington, even though now I realise I didn't introduce myself.
Image
Image
2013 Caddy with EA888 Gen3 2.0TSI DSG, Superplus MSP19 , Caddy4 rear lights, Polo GTI (mk7 style) steering wheel, Relentless Tuning front coilovers, Audi A6 S-Line front seats, Boxster fronts & GTI rear Brakes, 3D Colour Premium dash cluster, Caddy life arm rest, Motexion bulkhead, MIB head unit


All posts written by me are the intellectual property of the caddy2K forum and I do not consent to copying or redistribution of any sort
Mayor West
Caddy Fan
Posts: 85
Joined: Tue Jul 08, 2014 12:02 am
Engine size/power: 1.4 16V Petrol (74bhp)

Re: SRS Automotive #Racevan - Ex Darkside Developments

Post by Mayor West »

Doc wrote:Welcome Stefan, wicked van.
Was good chatting to you at Donington, even though now I realise I didn't introduce myself.
Cheers Doc. Not to worry, sometimes it's better to remain anonymous anyway :)

I did think after you commented on instagram if it was you I had been speaking to at Donington.

Just contemplating on whether to go full race mode with the van and cage it to use it on more track days??
User avatar
Brian the Sn@il
200BHP+
Posts: 239
Joined: Fri May 13, 2016 3:53 pm
Engine size/power: 1.8 20V Turbo
Location: Eastern

Re: SRS Automotive #Racevan - Ex Darkside Developments

Post by Brian the Sn@il »

WOW now that's a Racing Caddy 8) 8)
2016 EU6 2.0TDi 150PS DSG
Mr. P
Hyper Poster
Posts: 741
Joined: Sat Feb 16, 2013 6:22 pm
Engine size/power: 1.4 16V Petrol (79bhp)
Location: St Austell

Re: SRS Automotive #Racevan - Ex Darkside Developments

Post by Mr. P »

What's your catch tank fitted to at the rear of the engine? Can't quite make it out?


Sent from my iPhone using Tapatalk
PodgeyPerfections
Mayor West
Caddy Fan
Posts: 85
Joined: Tue Jul 08, 2014 12:02 am
Engine size/power: 1.4 16V Petrol (74bhp)

Re: SRS Automotive #Racevan - Ex Darkside Developments

Post by Mayor West »

Mr. P wrote:What's your catch tank fitted to at the rear of the engine? Can't quite make it out?


Sent from my iPhone using Tapatalk
1 pipe to the breather on the cam cover and the other to the TIP pipe :)
Mr. P
Hyper Poster
Posts: 741
Joined: Sat Feb 16, 2013 6:22 pm
Engine size/power: 1.4 16V Petrol (79bhp)
Location: St Austell

Re: SRS Automotive #Racevan - Ex Darkside Developments

Post by Mr. P »

Mayor West wrote:
1 pipe to the breather on the cam cover and the other to the TIP pipe :)
The circle part is part of the cam cover then?


Sent from my iPhone using Tapatalk
PodgeyPerfections
Mayor West
Caddy Fan
Posts: 85
Joined: Tue Jul 08, 2014 12:02 am
Engine size/power: 1.4 16V Petrol (74bhp)

Re: SRS Automotive #Racevan - Ex Darkside Developments

Post by Mayor West »

Mr. P wrote:The circle part is part of the cam cover then?


Sent from my iPhone using Tapatalk
The top pipe goes to the cam cover & the bottom pipe to the TIP
Mayor West
Caddy Fan
Posts: 85
Joined: Tue Jul 08, 2014 12:02 am
Engine size/power: 1.4 16V Petrol (74bhp)

Re: SRS Automotive 300+bhp BKD #Racevan - Ex Darkside Developments

Post by Mayor West »

Nothing major to add here but Powerflex sent these new bushes to try out, this will make a complete rear bush kit now.

These should be available shortly from Darkside Developments.

Image

Image

The rear ARB bush doesn't quite fit right as mine has the bigger Caddy Maxi ARB so that is being swapped once the new one arrives.

Image
User avatar
torque777
Hyper Poster
Posts: 5377
Joined: Wed May 28, 2014 12:47 pm
Engine size/power: 1.4 16V Petrol (79bhp)
Location: Shropshire

Re: SRS Automotive 300+bhp BKD #Racevan - Ex Darkside Developments

Post by torque777 »

How hard was it to change the bushes, especially the chassis ones? Also do they now have a bigger gap between hangers? Looks like bush is wider
Mayor West
Caddy Fan
Posts: 85
Joined: Tue Jul 08, 2014 12:02 am
Engine size/power: 1.4 16V Petrol (74bhp)

Re: SRS Automotive 300+bhp BKD #Racevan - Ex Darkside Developments

Post by Mayor West »

Changing them was pretty straightforward, we just burnt the old ones out.

The bush doesn't seem to be any wider, we gave all of the measurements from my van for the bushes to be made and they seem fine.

I didn't think I would notice a difference but even when driving normally in traffic you can tell the rear end is more planted.
Post Reply