It is true, it does, however the "down and to the left with no high beam" is a "limp mode" for the lights when the ALS system is completely non-operational. There is an ALS module that controls the beam position and high-beam shutter. You need to get the ALS system up and running, trained and error free before the "bend" functions or high beams will work. IIRC we discussed this before. You may be able to graft the ALS system into a CECM, as it's mostly self-contained, but it's designed for a 086S or later BCM, so who knows what part the BCM plays (or whether you can even code the Xenon lights into a CECM).
Yes, I do have mine up and running 100%, and it was quite a learning curve as most others on here that had done the upgrade either had it done by HazzyDayz (or similar) or had done an incomplete upgrade themselves.