Ddraeg's Low & Slow SDI
- Ddraeg
- 100BHP+
- Posts: 115
- Joined: Sat Feb 24, 2018 11:31 pm
- Engine size/power: 2.0 SDI (70bhp)
Re: Ddraeg's Low & Slow SDI
So today my poor little van took a bump on the noggin. It was quite windy in North Wales last night and a tree very nearly fell on the van! Very very lucky it escaped with just a ding on the top of the rear door as it could well have been a write off.
Sent from my iPhone using Tapatalk
Sent from my iPhone using Tapatalk
- Caddyluv
- Hyper Poster
- Posts: 4171
- Joined: Sat Oct 14, 2017 5:11 pm
- Engine size/power: 2.0 CR TDI (108bhp)
Re: Ddraeg's Low & Slow SDI
You getting a paintless dent removal guy?
Sent from my iPhone using Tapatalk
Sent from my iPhone using Tapatalk
- JD2k
- Twin Turbo poster
- Posts: 356
- Joined: Mon Aug 14, 2017 11:50 am
- Engine size/power: 1.6 CR TDI (102bhp)
- Location: Cheshire, UK
- Contact:
Re: Ddraeg's Low & Slow SDI
Lucky escape :/
Drove to work this morning (Chester/north wales) and it felt like I was flying a plane, the van was all over the place on the M56!
Drove to work this morning (Chester/north wales) and it felt like I was flying a plane, the van was all over the place on the M56!
- Ddraeg
- 100BHP+
- Posts: 115
- Joined: Sat Feb 24, 2018 11:31 pm
- Engine size/power: 2.0 SDI (70bhp)
Re: Ddraeg's Low & Slow SDI
Yeah got a number for a guy who should be able to sort it. I got a few other dings I'm gonna get him to look at too.
Yeah I went to work along the A55 and it was abit of a wobble.
Sent from my iPhone using Tapatalk
Yeah I went to work along the A55 and it was abit of a wobble.
Sent from my iPhone using Tapatalk
- Liam
- Hyper Poster
- Posts: 3161
- Joined: Wed Nov 18, 2009 9:47 am
- Engine size/power: 2.0 TDI (140bhp)
- Location: Cavan
Re: Ddraeg's Low & Slow SDI
damn you were lucky thats all the damage that was done
2016 2.0 Tdi Mk4 Trendline caddy 160bhp
Remapped by Joe Power at TDR.ie www.tdr.ie
Build thread here
http://caddy2k.com/forum/viewtopic.php?t=34976
Remapped by Joe Power at TDR.ie www.tdr.ie
Build thread here
http://caddy2k.com/forum/viewtopic.php?t=34976
- Caddyluv
- Hyper Poster
- Posts: 4171
- Joined: Sat Oct 14, 2017 5:11 pm
- Engine size/power: 2.0 CR TDI (108bhp)
Re: Ddraeg's Low & Slow SDI
Few no paint cost. Fingers crossed for you mate.
Sent from my iPhone using Tapatalk
Sent from my iPhone using Tapatalk
- Ddraeg
- 100BHP+
- Posts: 115
- Joined: Sat Feb 24, 2018 11:31 pm
- Engine size/power: 2.0 SDI (70bhp)
Re: Ddraeg's Low & Slow SDI
I think the Rhino KammBars saved the vans life. No damage on the bar itself but I can only assume the log hit that before the actual van. So glad I re-drilled the roof and moved the bar to the back now!
Yeah I'm gonna give the guy a ring today or this weekend, get a quote and what not! Asses the damage to the wallet as well as the van!
- Ddraeg
- 100BHP+
- Posts: 115
- Joined: Sat Feb 24, 2018 11:31 pm
- Engine size/power: 2.0 SDI (70bhp)
Re: Ddraeg's Low & Slow SDI
After the vans fight with a tree it's seen a bit of neglect. I've been away with work a lot recently and not had the energy to put some work into it! This weekend however I managed to give it a scrub and do a few little jobs I've meant to do for ages.
Finally fitted my new heater knobs. China's best!
And after a long time I finally sorted out the front roof bar. I had previously cut the bars to the same length however the mounting points at the front of the vehicle are further apart than the rear. This left the front bar looking a lot shorter than the rear and a little odd. So I cut a new bar down to match the rear bars overhang. It's the little things!
Due to my absence I haven't managed to get the dent repair guy out yet. That's next weeks job hopefully!
Sent from my iPhone using Tapatalk
Finally fitted my new heater knobs. China's best!
And after a long time I finally sorted out the front roof bar. I had previously cut the bars to the same length however the mounting points at the front of the vehicle are further apart than the rear. This left the front bar looking a lot shorter than the rear and a little odd. So I cut a new bar down to match the rear bars overhang. It's the little things!
Due to my absence I haven't managed to get the dent repair guy out yet. That's next weeks job hopefully!
Sent from my iPhone using Tapatalk
- Ddraeg
- 100BHP+
- Posts: 115
- Joined: Sat Feb 24, 2018 11:31 pm
- Engine size/power: 2.0 SDI (70bhp)
Ddraeg's Low & Slow SDI
Still no progress on the dents as the repair guy is being a little elusive!
However, today I did get the rear windows tinted finally! Gone for 5%, can't see in much but I was pleasantly surprised with the visibility from inside the van out! Work was done by North Wales Tuning and Tinting. I'd highly recommend, fast, reasonably priced and came out to my place of work to do it!
Sent from my iPhone using Tapatalk
However, today I did get the rear windows tinted finally! Gone for 5%, can't see in much but I was pleasantly surprised with the visibility from inside the van out! Work was done by North Wales Tuning and Tinting. I'd highly recommend, fast, reasonably priced and came out to my place of work to do it!
Sent from my iPhone using Tapatalk
- Ddraeg
- 100BHP+
- Posts: 115
- Joined: Sat Feb 24, 2018 11:31 pm
- Engine size/power: 2.0 SDI (70bhp)
Ddraeg's Low & Slow SDI
Double post.
Last edited by Ddraeg on Fri Sep 14, 2018 5:54 pm, edited 1 time in total.
- Ddraeg
- 100BHP+
- Posts: 115
- Joined: Sat Feb 24, 2018 11:31 pm
- Engine size/power: 2.0 SDI (70bhp)
Re: Ddraeg's Low & Slow SDI
Got a few jobs ticked off this week.
Finally fitted the genuine VW aux connection to the van. Annoyingly all the blanks in the dash were the wrong size. Ended up fitting it into the money tray as I wanted it accessible.
Made a start on the roof insulation as well. Finished the cab and half of the rear. Yes, the van is now mostly held together with tape!
Sent from my iPhone using Tapatalk
Finally fitted the genuine VW aux connection to the van. Annoyingly all the blanks in the dash were the wrong size. Ended up fitting it into the money tray as I wanted it accessible.
Made a start on the roof insulation as well. Finished the cab and half of the rear. Yes, the van is now mostly held together with tape!
Sent from my iPhone using Tapatalk
- Ddraeg
- 100BHP+
- Posts: 115
- Joined: Sat Feb 24, 2018 11:31 pm
- Engine size/power: 2.0 SDI (70bhp)
Re: Ddraeg's Low & Slow SDI
Pulled my finger out a bit recently!
Finished the rear insulation and refitted the standard roof panel back into place.
Sorted out the annoying whining noise that was caused by a bad earth on the aux! Crystal clear now!
The Touran seat bases arrived from eBay. Thank you CaddyLuv for finding these for me! Which meant that I could finally fit the new seats. Chuffed with them! Much more comfortable than the originals and loads more storage!
Unfortunately I haven't hooked them up to be heated but I may have a look into doing it in the future. Does anyone know of any decent waterproof covers that would fit these seats?
Sent from my iPhone using Tapatalk
Finished the rear insulation and refitted the standard roof panel back into place.
Sorted out the annoying whining noise that was caused by a bad earth on the aux! Crystal clear now!
The Touran seat bases arrived from eBay. Thank you CaddyLuv for finding these for me! Which meant that I could finally fit the new seats. Chuffed with them! Much more comfortable than the originals and loads more storage!
Unfortunately I haven't hooked them up to be heated but I may have a look into doing it in the future. Does anyone know of any decent waterproof covers that would fit these seats?
Sent from my iPhone using Tapatalk
- Caddyluv
- Hyper Poster
- Posts: 4171
- Joined: Sat Oct 14, 2017 5:11 pm
- Engine size/power: 2.0 CR TDI (108bhp)
Re: Ddraeg's Low & Slow SDI
I guess your heating them.
Sent from my iPhone using Tapatalk
Sent from my iPhone using Tapatalk
- Ddraeg
- 100BHP+
- Posts: 115
- Joined: Sat Feb 24, 2018 11:31 pm
- Engine size/power: 2.0 SDI (70bhp)
Re: Ddraeg's Low & Slow SDI
Caddyluv wrote: I guess your heating them.
Sent from my iPhone using Tapatalk
Not sure yet. Need to investigate heating them a bit further! See the cost and what's involved!
Thanks for finding those bases mate!
Sent from my iPhone using Tapatalk
- Caddyluv
- Hyper Poster
- Posts: 4171
- Joined: Sat Oct 14, 2017 5:11 pm
- Engine size/power: 2.0 CR TDI (108bhp)
Re: Ddraeg's Low & Slow SDI
No worries.
Sent from my iPhone using Tapatalk
Sent from my iPhone using Tapatalk