What's the problem with this engine apart from throwing rods . ?
Any electrical issues
Mine won't start. Threw up crank sensor .
Sent from my SM-G965F using Tapatalk
08 plate bls engine
-
- Caddy2k Groupie
- Posts: 16
- Joined: Tue Oct 16, 2012 12:34 pm
- Engine size/power: 1.9 TDI (104bhp)
- Location: Derby
-
- Hyper Poster
- Posts: 1387
- Joined: Wed Aug 26, 2015 8:05 pm
Re: 08 plate bls engine
are you getting any rpm on the dash?
is the cluster lighting up
Sent from my ASUS_X00ID using Tapatalk
is the cluster lighting up
Sent from my ASUS_X00ID using Tapatalk
-
- Caddy2k Groupie
- Posts: 16
- Joined: Tue Oct 16, 2012 12:34 pm
- Engine size/power: 1.9 TDI (104bhp)
- Location: Derby
Re: 08 plate bls engine
Clusters light up .shanky887614 wrote:are you getting any rpm on the dash?
is the cluster lighting up
Sent from my ASUS_X00ID using Tapatalk
Rpm moves .
If l spray brake cleaner into the throttle body it runs. Seams like a fuel issue .
Sent from my SM-G965F using Tapatalk
- Doc
- Not God, just a bellend
- Posts: 18489
- Joined: Thu Jan 01, 1970 1:00 am
- Engine size/power: 2.0TSI EA888 Gen3
- Location: Monaghan, Ireland & Derbyshire, UK
Re: 08 plate bls engine
When you say it 'threw up" the crank sensor, what exactly was the fault?
The crank sensor needs to read properly in relation to the cam sensor to allow the engine to fire. I'd say solving the crank sensor fault will solve your problem.
The crank sensor needs to read properly in relation to the cam sensor to allow the engine to fire. I'd say solving the crank sensor fault will solve your problem.
2013 Caddy with EA888 Gen3 2.0TSI DSG, Superplus MSP19 , Caddy4 rear lights, Polo GTI (mk7 style) steering wheel, Relentless Tuning front coilovers, Audi A6 S-Line front seats, Boxster fronts & GTI rear Brakes, 3D Colour Premium dash cluster, Caddy life arm rest, Motexion bulkhead, MIB head unit
All posts written by me are the intellectual property of the caddy2K forum and I do not consent to copying or redistribution of any sort
-
- Caddy2k Groupie
- Posts: 16
- Joined: Tue Oct 16, 2012 12:34 pm
- Engine size/power: 1.9 TDI (104bhp)
- Location: Derby
Re: 08 plate bls engine
Sorry meant to be cam sensor .Doc wrote:When you say it 'threw up" the crank sensor, what exactly was the fault?
The crank sensor needs to read properly in relation to the cam sensor to allow the engine to fire. I'd say solving the crank sensor fault will solve your problem.
Now l 've changed the sensor and the fault has gone . But still won't start .
Dropped the tank to make sure the pump is clean .pump is dirty so going to clean it .But it's priming up to the fuel filter.
Sent from my SM-G965F using Tapatalk
-
- Caddy2k Groupie
- Posts: 16
- Joined: Tue Oct 16, 2012 12:34 pm
- Engine size/power: 1.9 TDI (104bhp)
- Location: Derby
Re: 08 plate bls engine
It's getting serious now. But a full working pump on still won't start. Time to get the injectors out and check them ? Can any injectors go in out of a 1.9 ?
Sent from my SM-G965F using Tapatalk
Sent from my SM-G965F using Tapatalk
-
- Hyper Poster
- Posts: 1387
- Joined: Wed Aug 26, 2015 8:05 pm
Re: 08 plate bls engine
technically yes but some models especially the arl/asz and blt etc use larger cc injectors so it will run lumpy
the map can be adjusted to suit though.
get it checked first, there is workshop manuals to check if the injector seals are shot and if the seals are fine it could be the loom etc.
i had that issue when i had a worn cam+bad tappets
Sent from my ASUS_X00ID using Tapatalk
the map can be adjusted to suit though.
get it checked first, there is workshop manuals to check if the injector seals are shot and if the seals are fine it could be the loom etc.
i had that issue when i had a worn cam+bad tappets
Sent from my ASUS_X00ID using Tapatalk
Last edited by Doc on Tue Dec 04, 2018 8:32 pm, edited 2 times in total.
Reason: Removed unnecessary quote of entire previous post.
Reason: Removed unnecessary quote of entire previous post.
-
- Caddy2k Groupie
- Posts: 16
- Joined: Tue Oct 16, 2012 12:34 pm
- Engine size/power: 1.9 TDI (104bhp)
- Location: Derby
Re: 08 plate bls engine
I 've changed the loom in the head already .
Never thought about a worn cam . It has got high mileage aswell . In the 200k bracket .
Where will l find the info about the injector conditions?
Sent from my SM-G965F using Tapatalk
Never thought about a worn cam . It has got high mileage aswell . In the 200k bracket .
Where will l find the info about the injector conditions?
Sent from my SM-G965F using Tapatalk
Last edited by Doc on Wed Dec 05, 2018 6:16 am, edited 1 time in total.
Reason: Removed unnecessary quote of previous post
Reason: Removed unnecessary quote of previous post