Scared to lower the workvan

Random Caddy chat.
Not the place for sale or wanted topics.
crxftyyy
Caddy Fan
Posts: 57
Joined: Thu Oct 18, 2018 9:24 pm
Engine size/power: 1.9 TDI (104bhp)
Location: Cumbria
Contact:

Scared to lower the workvan

Post by crxftyyy »

Hi all, not really in the know with all things lowering. After fitting my touran bumper to my workvan I'm having trouble resisting the urge to lower it,my only problem being it is a working van and I carry quite a fair bit of kit including a water tank and I'm worried a set of coilovers or lowering springs wouldn't hold up to the weight. Can anyone enlighten me? Pic below as an idea, not thinking of slamming it but I've a set of 17s in the pipeline and want them to sit a little nicerImage

Sent from my CLT-L09 using Tapatalk

User avatar
mikenorman
Twin Turbo poster
Posts: 364
Joined: Thu Nov 10, 2016 10:07 pm
Engine size/power: 1.9 TDI (104bhp)

Scared to lower the workvan

Post by mikenorman »

Image

I carry a 250kg water tank in mine and in summer I’ll additionally have about another 50kg in gardening tools. I’d probably say with all the bits and bobs I carry at times it’s probably up at around 400kg and don’t have any problems on vmaxx coilovers. The fronts pretty low and the backs on the lowest setting.

The pic is of it with no weight in. 400kg probably drops it about 5mm further but if anything it stiffens it up. I’d get it slammed if I were you ImageImageImageImage




Sent from my iPhone using Tapatalk
Last edited by mikenorman on Thu Jan 03, 2019 8:35 am, edited 1 time in total.
User avatar
Barbel330
Hyper Poster
Posts: 2134
Joined: Tue Dec 15, 2015 9:20 pm
Engine size/power: 1.6 CR TDI (102bhp)

Re: Scared to lower the workvan

Post by Barbel330 »

I wouldn’t worry too much, just do it.

Mine is used as my work van and carries a lot of weight permanently, then it also carries my fishing gear regularly too. I dread to think how much weight is in there. It drives no different when it’s full and the amount it drops when fully loaded is minimal.

Work gear and fishing gear.
Image

How it sits with just my work gear.
Image


Sent from my iPhone using Tapatalk
Instagram: @y_5cuf
User avatar
Caddyluv
Hyper Poster
Posts: 4171
Joined: Sat Oct 14, 2017 5:11 pm
Engine size/power: 2.0 CR TDI (108bhp)

Re: Scared to lower the workvan

Post by Caddyluv »

Image

Run a cleaning business out of mine.


Sent from my iPhone using Tapatalk
crxftyyy
Caddy Fan
Posts: 57
Joined: Thu Oct 18, 2018 9:24 pm
Engine size/power: 1.9 TDI (104bhp)
Location: Cumbria
Contact:

Re: Scared to lower the workvan

Post by crxftyyy »

Thanks for the help everyone. Might have to save for my birthday after skinting myself so far

Sent from my CLT-L09 using Tapatalk

User avatar
Sean1066
Hyper Poster
Posts: 2333
Joined: Wed Oct 24, 2018 11:01 pm
Engine size/power: 1.6 CR TDI (102bhp)
Location: Newton abbot Devon

Re: Scared to lower the workvan

Post by Sean1066 »

I use mine for work and I have lowered mine.
I can still carry the same as before.
Before Image

AfterImage


Sent from my iPad using Tapatalk
Caddy maxi 3.2 VR6 EX BG

My build thread
https://www.caddy2k.com/forum/viewtopic ... 13&t=36851
User avatar
james400
Hyper Poster
Posts: 1207
Joined: Sun Sep 17, 2017 8:35 am
Engine size/power: 1.4 16V Petrol (79bhp)

Re: Scared to lower the workvan

Post by james400 »

I had my fully built vxr engine in the back for a week and didn't have any problems and my is o coil overs ImageImage

Sent from my SM-G950F using Tapatalk

stevegray1977
Caddy2k Groupie
Posts: 26
Joined: Tue Aug 28, 2018 10:08 pm
Engine size/power: 1.6 CR TDI (75bhp)

Re: Scared to lower the workvan

Post by stevegray1977 »

Guys - I'm quite new to all this. My van is an ex - BG van and the suspension is really high. I have no idea how to lower it? I did call a couple if garages but they said I needed to buy a kit?
The wheels are still the original steel wheels - so eventually I want to buy some new alloys - 18inch etc, so wasn't sure I would need it lowered as much with bigger wheels?

Image


Sent from my iPhone using Tapatalk
User avatar
mikenorman
Twin Turbo poster
Posts: 364
Joined: Thu Nov 10, 2016 10:07 pm
Engine size/power: 1.9 TDI (104bhp)

Re: Scared to lower the workvan

Post by mikenorman »

Yeh I’d take it to somewhere that knows what they’re doing. Best off asking a question on your own post and seeing if there’s anyone local to you who can help you out

As for your wheels and height, I’d do both at the same time personally


Sent from my iPhone using Tapatalk
Last edited by Doc on Thu Jan 03, 2019 2:50 pm, edited 1 time in total.
Reason: Removed unnecessary quote of entire previous post
stevegray1977
Caddy2k Groupie
Posts: 26
Joined: Tue Aug 28, 2018 10:08 pm
Engine size/power: 1.6 CR TDI (75bhp)

Re: Scared to lower the workvan

Post by stevegray1977 »

Good advice - ok mate


Sent from my iPhone using Tapatalk
KIPPER69
Caddy2k Groupie
Posts: 4
Joined: Tue Jan 30, 2018 2:57 pm
Engine size/power: 1.6 CR TDI (102bhp)
Location: Swanland, East Yorkshire

Re: Scared to lower the workvan

Post by KIPPER69 »

The British Gas Caddy Maxi work vans have really heavy duty springs fitted as standard. I carry a lot of weight but the wheel gap at the rear never seems to alter much.
As for Larger 18 inch wheels you would normally reduce the tyre section to be close to the original wheel rolling diameter, so the wheel total size should be as near as possible without giving speedometer errors of more than 1 or 2%.
If you go to an 18 inch wheel it should have a 35 or 40 section. Something like 18 x 225 x 40.
I am running this size Audi 18 inch A3 Wheel and it helped bring my speedo to about 1 MPH Fast instead of 3 MPH fast.
Speed checked with Satnav.

I hope this helps.

I have just bought the Stance+ Lowering kit and it will be fitted early next week.
Ex British Gas Blue Caddy Maxi. 2011. 1.6 was 102 now 140 BHP.
Colour Coded bumpers and mirrors.
Going for a lowered look with spring kit and coilovers.
Retrofit cruise control to happen early 2019.
stevegray1977
Caddy2k Groupie
Posts: 26
Joined: Tue Aug 28, 2018 10:08 pm
Engine size/power: 1.6 CR TDI (75bhp)

Re: Scared to lower the workvan

Post by stevegray1977 »

Wow - that's brilliant, thanks for all that mate.

That's great, so the stance lowering kit? Is that something you buy online and take to a garage?
If you don't mind me asking, how much did you buy it for and how much will the garage charge you? Is that all I would need bearing in mind it's leaf at the back and coil st the front?
As you can see it's quite high

Cheers



Sent from my iPhone using Tapatalk
stevegray1977
Caddy2k Groupie
Posts: 26
Joined: Tue Aug 28, 2018 10:08 pm
Engine size/power: 1.6 CR TDI (75bhp)

Re: Scared to lower the workvan

Post by stevegray1977 »

Image


Sent from my iPhone using Tapatalk
User avatar
JAZ8140
Caddy Fan
Posts: 66
Joined: Mon Dec 24, 2018 10:03 am

Re: Scared to lower the workvan

Post by JAZ8140 »

wow that is a hefty gap

Sent from my SM-G950F using Tapatalk

User avatar
Southcoastcaddy
Caddy2k Groupie
Posts: 16
Joined: Tue May 15, 2018 11:43 pm
Engine size/power: 1.9 TDI (104bhp)

Re: Scared to lower the workvan

Post by Southcoastcaddy »

Although ours isn't a work van it's low and we moved house on ours and it was fine..

When I say fine though I mean taking the usual precautions as the front lip (as we have a sportline lip/splitter on ours too) can scrape over some larger holes or dips even when she is totally empty :roll:
Post Reply