Axle flip kit?
- Liam
- Hyper Poster
- Posts: 3161
- Joined: Wed Nov 18, 2009 9:47 am
- Engine size/power: 2.0 TDI (140bhp)
- Location: Cavan
Re: Axle flip kit?
u dont have to if not going too low but its adviseable
2016 2.0 Tdi Mk4 Trendline caddy 160bhp
Remapped by Joe Power at TDR.ie www.tdr.ie
Build thread here
http://caddy2k.com/forum/viewtopic.php?t=34976
Remapped by Joe Power at TDR.ie www.tdr.ie
Build thread here
http://caddy2k.com/forum/viewtopic.php?t=34976
-
- Caddy2k Groupie
- Posts: 19
- Joined: Thu Nov 08, 2018 11:10 pm
- Engine size/power: 1.6 CR TDI (102bhp)
Re: Axle flip kit?
thank you
was thinking of about 40mm drop, does anyone have theirs at 40mm drop with original shockers ? and does it look ok at 40 drop
was thinking of about 40mm drop, does anyone have theirs at 40mm drop with original shockers ? and does it look ok at 40 drop
- PaulC61
- Hyper Poster
- Posts: 534
- Joined: Mon Aug 21, 2017 8:15 pm
- Engine size/power: 1.6 CR TDI (102bhp)
Re: Axle flip kit?
The Caddy is booked in to have the 45mm Eibach pro-Kit and Powerflex bushes for the rear to be done on Friday. At this stage I'm not planning to change the shocks until I know how the ride feels. 99% of the time mine is unladen. I will give some feed back when it's done.
My Pure Grey Maxi Kombi Build viewtopic.php?f=13&t=32111
- andyreflexsilver
- 100BHP+
- Posts: 167
- Joined: Mon Dec 31, 2018 8:26 pm
Re: Axle flip kit?
Dropped mine 40-45 this week and I didn’t change the rear shocks. The ride is slightly stiffer at the rear than it was but still not a bad ride. It looks fine at that height I think here’s it before
And after
I’m thinking of taking the rear one hole lower but I’ll see how I feel once all my gear is in
Sent from my iPhone using Tapatalk
And after
I’m thinking of taking the rear one hole lower but I’ll see how I feel once all my gear is in
Sent from my iPhone using Tapatalk
- JAZ8140
- Caddy Fan
- Posts: 66
- Joined: Mon Dec 24, 2018 10:03 am
Re: Axle flip kit?
I need to get a few issues sorted on my van then I will be lowering it i like the look of banded steels just need to find a set of 18s
Sent from my SM-G950F using Tapatalk
Sent from my SM-G950F using Tapatalk
- PaulC61
- Hyper Poster
- Posts: 534
- Joined: Mon Aug 21, 2017 8:15 pm
- Engine size/power: 1.6 CR TDI (102bhp)
Re: Axle flip kit?
Thanks for posting the pictures andyreflexsilver, your Caddy looks a lot better lowered. Have you had any issues with getting the tracking sorted. Can not wait for mine to be done on Friday. The ride can’t be as stiff as the 2 hours spent driving the other halves A1 today, skinny tires and sports suspension make for a hard ride.
My Pure Grey Maxi Kombi Build viewtopic.php?f=13&t=32111
- andyreflexsilver
- 100BHP+
- Posts: 167
- Joined: Mon Dec 31, 2018 8:26 pm
Re: Axle flip kit?
No I haven’t done it yet mate, it’s going on Tuesday to get the tracking sorted so will let you know then! I did have a snapped leaf spring when I took it apart it was cracked under the axle mount and when I took the top plate off it snapped clean in half! Other than that was straight forward enough to do!
Sent from my iPhone using Tapatalk
Sent from my iPhone using Tapatalk
-
- Caddy2k Groupie
- Posts: 19
- Joined: Thu Nov 08, 2018 11:10 pm
- Engine size/power: 1.6 CR TDI (102bhp)
Re: Axle flip kit?
thanks for the pics of your van thats just what i was looking for, that looks mint
-
- Caddy2k Groupie
- Posts: 7
- Joined: Wed Jan 09, 2019 3:07 pm
- Engine size/power: 1.6 CR TDI (75bhp)
Re: Axle flip kit?
What benefits come with flipping the axle?
- andyreflexsilver
- 100BHP+
- Posts: 167
- Joined: Mon Dec 31, 2018 8:26 pm
Re: Axle flip kit?
Lowers the rear of the van
Sent from my iPhone using Tapatalk
Sent from my iPhone using Tapatalk
-
- Caddy2k Groupie
- Posts: 27
- Joined: Thu Aug 31, 2017 11:43 am
- Engine size/power: 1.8 20V Turbo
Re: Axle flip kit?
Hiya Mate,hef355 wrote: ↑Sat Jan 05, 2019 11:19 am No trouble at all here you go, I would go gor the super low option as it has an off set locator which is off centre. This will ensure the rear wheel always remains central in the arch. Message me direct if you want my number, happy to help fella
https://www.darksidedevelopments.co.uk/ ... sters.html
Sent from my iPhone using Tapatalk
Just doing a bit of research on these kits. I believe i have everything needed to carry out this lowering.
Are you still available for advice? I am planning to do this, this Friday 15th.
Thanks
- woody67
- 200BHP+
- Posts: 200
- Joined: Mon Jan 07, 2019 10:42 pm
- Engine size/power: 1.6 CR TDI (102bhp)
Re: Axle flip kit?
Thanks for the pics looks mint, tempted to do mine, was it easy enough to do yoruslef? I have access to a ramp and workshop and have the tools for it.
- sheepy92
- Twin Turbo poster
- Posts: 362
- Joined: Mon Oct 23, 2017 8:20 pm
- Engine size/power: 1.6 CR TDI (102bhp)
Re: Axle flip kit?
I would recomend poly bushing as the rear shackle bushes are rubbish and the rear axle will wobble and the handling wont be the best also upgrade the anti roll bar and poly bush thatellis wrote: Hiya Mate,
Just doing a bit of research on these kits. I believe i have everything needed to carry out this lowering.
Are you still available for advice? I am planning to do this, this Friday 15th.
Thanks
Sent from my SM-G960F using Tapatalk