Rear seat belts
-
- Caddy2k Groupie
- Posts: 25
- Joined: Thu Feb 14, 2019 3:20 pm
Rear seat belts
I could really do with help on installing my rear seat belts, anyone have some clear pictures of them installed, mine are from a caddy life, also what spreader plates did you use, I would search but I don’t have enough post, hope some one can help
- Jonesandrew6
- 100BHP+
- Posts: 110
- Joined: Tue Jun 26, 2018 9:57 pm
- Engine size/power: 1.6 CR TDI (102bhp)
Re: Rear seat belts
Where abouts in the rear as normally just go by the sliding door i think but i had mine installed in the rear tail light pillars had to have a threaded nut welded to a plate and welded and rivoted into the pillar in two places on mine will post some pics of where mime is installed
Sent from my SM-G950F using Tapatalk
Sent from my SM-G950F using Tapatalk
-
- Caddy2k Groupie
- Posts: 25
- Joined: Thu Feb 14, 2019 3:20 pm
Re: Rear seat belts
Just behind the sliding door, just want to see if I’m looking at the right spot, especially the lower belt.
Sent from my iPhone using Tapatalk
Sent from my iPhone using Tapatalk
-
- Caddy2k Groupie
- Posts: 8
- Joined: Sat Feb 16, 2019 7:48 pm
Re: Rear seat belts
I thought these fixings would be in all maxis?
-
- Caddy2k Groupie
- Posts: 25
- Joined: Thu Feb 14, 2019 3:20 pm
Re: Rear seat belts
Mines just a swb, I’m fitting the caddy life seats, I can’t believe the seat belt anchor points are not installed from factory on all caddy
-
- Caddy2k Groupie
- Posts: 9
- Joined: Wed Feb 28, 2018 8:14 am
- Engine size/power: 1.6 CR TDI (102bhp)
- Location: staffordshire
Re: Rear seat belts
Hi
Does anyone know the distance that the middle row seat belt anchors should be fitted?
Does anyone know the distance that the middle row seat belt anchors should be fitted?
- BradleyB
- Twin Turbo poster
- Posts: 334
- Joined: Wed Feb 20, 2019 10:23 pm
Re: Rear seat belts
I’ve now sold the caddy I installed the rear seats into so I can’t take pics for u but
I purchased all my seats and hardware from Sirus
You need to drill into the metal partition
I then used masking tape to hang the spreader plate down behind whilst threading seat belt bolt through so you don’t keep dropping it lol
It’s a bit of a fiddle but if I managed any one can do it
I purchased all my seats and hardware from Sirus
You need to drill into the metal partition
I then used masking tape to hang the spreader plate down behind whilst threading seat belt bolt through so you don’t keep dropping it lol
It’s a bit of a fiddle but if I managed any one can do it
-
- Caddy2k Groupie
- Posts: 25
- Joined: Thu Feb 14, 2019 3:20 pm
Re: Rear seat belts
Thanks, I’ve now in stalled the seats and seat belts
Sent from my iPhone using Tapatalk
Sent from my iPhone using Tapatalk
-
- Caddy2k Groupie
- Posts: 9
- Joined: Wed Feb 28, 2018 8:14 am
- Engine size/power: 1.6 CR TDI (102bhp)
- Location: staffordshire
Re: Rear seat belts
Hi
anyone know what brackets go under the floor(under the tank to secure the rear brackets?
anyone know what brackets go under the floor(under the tank to secure the rear brackets?