Rear seat belts

Pics from around the web
simmo111
Caddy2k Groupie
Posts: 25
Joined: Thu Feb 14, 2019 3:20 pm

Rear seat belts

Post by simmo111 »

I could really do with help on installing my rear seat belts, anyone have some clear pictures of them installed, mine are from a caddy life, also what spreader plates did you use, I would search but I don’t have enough post, hope some one can help
User avatar
Jonesandrew6
100BHP+
Posts: 110
Joined: Tue Jun 26, 2018 9:57 pm
Engine size/power: 1.6 CR TDI (102bhp)

Re: Rear seat belts

Post by Jonesandrew6 »

Where abouts in the rear as normally just go by the sliding door i think but i had mine installed in the rear tail light pillars had to have a threaded nut welded to a plate and welded and rivoted into the pillar in two places on mine will post some pics of where mime is installed

Sent from my SM-G950F using Tapatalk

simmo111
Caddy2k Groupie
Posts: 25
Joined: Thu Feb 14, 2019 3:20 pm

Re: Rear seat belts

Post by simmo111 »

Just behind the sliding door, just want to see if I’m looking at the right spot, especially the lower belt.


Sent from my iPhone using Tapatalk
mike88
Caddy2k Groupie
Posts: 8
Joined: Sat Feb 16, 2019 7:48 pm

Re: Rear seat belts

Post by mike88 »

I thought these fixings would be in all maxis?
simmo111
Caddy2k Groupie
Posts: 25
Joined: Thu Feb 14, 2019 3:20 pm

Re: Rear seat belts

Post by simmo111 »

Mines just a swb, I’m fitting the caddy life seats, I can’t believe the seat belt anchor points are not installed from factory on all caddy
Est1863
Caddy2k Groupie
Posts: 9
Joined: Wed Feb 28, 2018 8:14 am
Engine size/power: 1.6 CR TDI (102bhp)
Location: staffordshire

Re: Rear seat belts

Post by Est1863 »

Hi
Does anyone know the distance that the middle row seat belt anchors should be fitted?
User avatar
BradleyB
Twin Turbo poster
Posts: 334
Joined: Wed Feb 20, 2019 10:23 pm

Re: Rear seat belts

Post by BradleyB »

I’ve now sold the caddy I installed the rear seats into so I can’t take pics for u but
I purchased all my seats and hardware from Sirus
You need to drill into the metal partition
I then used masking tape to hang the spreader plate down behind whilst threading seat belt bolt through so you don’t keep dropping it lol
It’s a bit of a fiddle but if I managed any one can do it 😂
simmo111
Caddy2k Groupie
Posts: 25
Joined: Thu Feb 14, 2019 3:20 pm

Re: Rear seat belts

Post by simmo111 »

Thanks, I’ve now in stalled the seats and seat belts


Sent from my iPhone using Tapatalk
Est1863
Caddy2k Groupie
Posts: 9
Joined: Wed Feb 28, 2018 8:14 am
Engine size/power: 1.6 CR TDI (102bhp)
Location: staffordshire

Re: Rear seat belts

Post by Est1863 »

Hi
anyone know what brackets go under the floor(under the tank to secure the rear brackets?
Post Reply