Caddy front splitter

Random Caddy chat.
Not the place for sale or wanted topics.
4oz
Caddy2k Groupie
Posts: 17
Joined: Tue Feb 04, 2020 7:51 pm

Caddy front splitter

Post by 4oz » Fri Feb 07, 2020 12:10 am

Hi,

Has anyone fitted this front lower splitter to a MK 4 and is it straight forwards fit?

https://www.ebay.co.uk/itm/LOWER-FRONT- ... 2749.l2649

Stickertone
Caddy Fan
Posts: 71
Joined: Fri Apr 12, 2019 9:28 pm

Re: Caddy front splitter

Post by Stickertone » Fri Feb 07, 2020 8:42 am

I fitted one, yeh easy enough to fit, I did it on my mates ramp, wouldn't fancy doing it rolling about on the floor.....👍

4oz
Caddy2k Groupie
Posts: 17
Joined: Tue Feb 04, 2020 7:51 pm

Re: Caddy front splitter

Post by 4oz » Fri Feb 07, 2020 7:25 pm

Okay thanks, I will probably have to roll around on the floor!
Does the splitter just fit in to holes already in the caddy or do I have to drill new ones?

User avatar
Barbel330
Hyper Poster
Posts: 1632
Joined: Tue Dec 15, 2015 9:20 pm
Engine size/power: 1.6 CR TDI (102bhp)

Re: Caddy front splitter

Post by Barbel330 » Fri Feb 07, 2020 8:34 pm

You drill the holes in the bumper and splitter. It’s easier to take the bumper off than do it on the van.
Instagram: @y_5cuf

User avatar
mark1a
Hyper Poster
Posts: 568
Joined: Mon Jan 16, 2017 7:34 pm
Location: Dorset, UK

Re: Caddy front splitter

Post by mark1a » Sun Feb 09, 2020 1:47 am

Got a TRC splitter on my mk4, and got the place that did the lowering job to fit it while on the ramp - as I recall it was just 3 bolts and it’s been solid for over a year now.
2017 Blackberry Maxi Life 190TDI 6MT OEM+
Brescia Clubsport 18” | OE Xenons | Limo tints | Vanstyle side bars | Wind deflectors
Remap 190bhp | H&R / Darkside lowering | TRC front splitter
Android HU | 4G WiFi | Wireless phone charge
Build thread here http://caddy2k.com/forum/viewtopic.php?f=13&t=34095

User avatar
gazza31112
200BHP+
Posts: 203
Joined: Sat Nov 02, 2019 9:51 am

Re: Caddy front splitter

Post by gazza31112 » Sun Feb 09, 2020 8:43 am

I took my bumper off turned it upsidedown, taped it in place and drilled through the existing spitter holes into the bumper and just bolt it on

Sent from my J8210 using Tapatalk


Roguedata
Caddy2k Groupie
Posts: 48
Joined: Tue Jan 07, 2020 8:38 pm

Re: Caddy front splitter

Post by Roguedata » Sun Feb 09, 2020 9:15 am



What’s involved to remove front bumper mate? Is it difficult?
Last edited by Doc on Sun Feb 09, 2020 9:15 am, edited 1 time in total.
Reason: Removed unnecessary quote of entire previous post

User avatar
gazza31112
200BHP+
Posts: 203
Joined: Sat Nov 02, 2019 9:51 am

Re: Caddy front splitter

Post by gazza31112 » Sun Feb 09, 2020 9:22 am

I was quite daunted by it at first aswel but honestly it's so easy, just undo the screws around the front of the wheel arches, two tricky ones right at the top (which I never put back lol) then there's about 4 or 5 screws under the front of the bumper, under 20 screws I'd say then it just lifts off.
First bumper I'd ever taken off in my life ,I had it off, splitter bolted on and put back on the van in about an hour.

Sent from my J8210 using Tapatalk



Roguedata
Caddy2k Groupie
Posts: 48
Joined: Tue Jan 07, 2020 8:38 pm

Re: Caddy front splitter

Post by Roguedata » Sun Feb 09, 2020 10:15 am

That’s impressive - thanks mate 👍
Last edited by Doc on Sun Feb 09, 2020 10:17 am, edited 1 time in total.
Reason: Removed unnecessary quote of entire previous post.

Post Reply