Maybe I am not doing it right, I can't make any of the above changes! My BCM is as follows:Proempie wrote: ↑Tue Oct 06, 2020 5:17 am • Audible lock/unlock: 09 Central Electrics - Byte 05 = 2F (Unlock confirmation is Not Active)
• Coming/leaving home: 09 Central Electrics:
-Byte 12 = 91
-Byte 17 = E9
• Mirror lowering:
09 Central Electrics:
-Byte 04 - Mirror lowering with reverse gear = Active
-Byte 08 - Synchronized Mirror Adjustment = Active
42 Driver Door & 52 Passenger Door - Coding = 0132144
You have to let the car learn the position of the mirror before it'll actually work. Also make sure it's enabled on you MFA settings.
This is how I got it to work:
1. Turn on ignition, but don't start the engine.
2. Select reverse gear.
3. Select passenger side mirror on mirror control knob.
4. Adjust passenger side mirror so you can see the kerb.
5. Take car out of reverse gear and return to neutral, or Park in automatic gearbox.
6. Turn off the ignition and the passenger side mirror will (hopefully) return to the normal 'O' position.
To use the dip function, the mirror control knob must be kept to the passenger side position.
---------------------------------------------------------------
09 Central Electrics
System description: BCM PQ35 M+
Software number: 5K0937086AD
Software version: 0193
Hardware number: 5K0937086AD
Hardware version: 122
Long coding: 611A0A3A8025086F088800809040816403810008424F89206480C7000041
Subsystems:
System description: Wischer 22052
Software number: 2K1955119F
Software version: 0715
Hardware version: 61
Long coding: 009795
