CADDY2K.com

Sean1066 wrote: ↑Sat Nov 21, 2020 7:51 pm Take your time and make sure you have all the parts that you need.
Look at blackberry build thread he has done a how to on his

C Chis wrote: ↑Sat Nov 21, 2020 8:30 pm As Sean has said, take your time and enjoy it!

Isolate your battery and remove your steering wheel before you start.

And if it doesn’t pull away from the window easily then you’ve still got a screw/bolt or two still to remove.

Oh, and remember to disconnect the temperature sensor on the RHS next to the A pillar.

Also a good idea to run the additional power wire to each of the A pillar door connectors while you have the dash out and use the Touran wiring harnesses when your converting your windows to electric.

You’ll also need to modify the top corner of the door cards where they meet the mirror cover as they are slightly different on the Touran


Sent from my iPad using Tapatalk

C Chis wrote: ↑Sun Nov 22, 2020 12:26 pm Hi buddy, yeah, there’s a good how to in the technical section.

Once your upgrade comes through in a few days you’ll have access to it


Sent from my iPad using Tapatalk

apriliajimmy wrote: ↑Sun Nov 22, 2020 12:49 pm I made a template with masking tape off the original door cards for the cutting. Only problem I have now is with the locking module wiring. I probably need different motors / modules.

Sent from my WAS-LX1A using Tapatalk

LewisOram11 wrote: I’ve seen that a small section needs to be cut out for the inside mirror part. The main thing is the extra wiring needed for it to work.