Caddy Seats

[pootis_owner]

I have fitted golf mk6 seats in my mk4 caddy

1 hole can be reused 3 holes needs to be drilled... bolt and nut works like a charm

I used an angle grinder to remove the little pin and angle in the front of the seat... i cut the old plug of the caddy seat and soldered it to the new seat (airbag cable and seatbelt cable)

[son of eevil]

Why couldn't you use 2 of them? I had to squish the seat rails a little to make it fit but it was very doable.

Sent from my SM-G991B using Tapatalk

[petrev]

Squishing depends on the seat model.
Some don't squish.
Tiguan folding seat has a spreader bar at the front and you have to cut it down ~10mm to narrow the track. Rear bends in ...

[pootis_owner]

Why couldn't you use 2 of them? I had to squish the seat rails a little to make it fit but it was very doable.

Sent from my SM-G991B using Tapatalk

Squishing the rails could be done i saw it as a option...
But in my feeling the seat isnt very movable in that situation. So thats why

[Fergal96]

Hi i considering buying myself a mk7 golf r but ive a disability which means bucket seats with deep sides can make it a nightmare for getting in and out so at the minute ive a mk7 golf match edition and i was wondering would the seats in it fit directly into a golf r

Any help appreciated