Stan Really is THE Man

Beaker2135 · Post by **Beaker2135** » Tue Mar 23, 2021 9:02 pm

Big thanks to Stan for helping me out when my ignorance got the better of me
I was fitting his two colour footwell lights. When It came to connecting the Ignition bezel I blow the LEDs testing to see which was which
Stan didn’t hesitate to offer the replace them and it came back better than it went
I now have white lights on entry and red while running

Cheers Stan you went above and beyond and it is appreciated

the swan fiend · Post by **the swan fiend** » Tue Mar 23, 2021 9:07 pm

Yep, I have to agree. Stan has helped me out a few times now, making little bits so as I don’t have to start soldering near the BCM (and probably setting my van on fire

)

Once again. Thanks mate

Sent from my iPhone using Tapatalk

the swan fiend · Post by **the swan fiend** » Tue Mar 23, 2021 10:39 pm

Ste. I think I now realise why you sold your lights to me. Stans colour change ones look so much better! I may have to upgrade

I’ve wired mine up as per the instructions......they go off when you turn the key. I’m going to look into re wiring them so as they come on with the headlights.

Would I be correct in thinking that to have the lights come on with the headlights, I’d need to move my +ve from terminal 43 on the white plug to terminal 22 on the black plug?
Next question....would my current loom be ok as I’m aware there’s 2 sizes of pin on the plugs.

Sent from my iPhone using Tapatalk

caddychris2002 · Post by **caddychris2002** » Wed Mar 24, 2021 2:50 am

Ohhh i want a set of these @Stantheman

Sent from my SM-G975F using Tapatalk

Beaker2135 · Post by **Beaker2135** » Wed Mar 24, 2021 7:03 am

@the swan fiend
Pete they will go off with the interior light, they are meant to. Terminal 22 (Black) is the dipped beam output but If you want them on with the side/head lights I’d connect to the blue/grey wire at the light switch, this is controlled by the dash lights dimmer switch, the same as the W8 interior light mod. If you move the BCM connection the pin will be the same but I think it would be a different pin for the light switch but I’m not 100% sure. If you’re not confident soldering a Scotchloc would be fine

D_EDD · Post by **D_EDD** » Wed Mar 24, 2021 8:34 am

I like them, where are they from?

Sent from my iPhone using Tapatalk

Beaker2135 · Post by **Beaker2135** » Wed Mar 24, 2021 8:46 am

Thanks
@stan-the-man on here makes them

D_EDD · Post by **D_EDD** » Wed Mar 24, 2021 8:48 am

Ok cheers, when I get the ability I’ll pm him

Sent from my iPhone using Tapatalk

the swan fiend · Post by **the swan fiend** » Wed Mar 24, 2021 8:55 am

Cheers for that info ste

Sent from my iPhone using Tapatalk

stan-the-man · Post by **stan-the-man** » Wed Mar 24, 2021 4:58 pm

Lads you’re making me blush

Sent from my iPhone using Tapatalk

Roscop · Post by **Roscop** » Sun Nov 28, 2021 1:32 pm

Hi Stan , contacting you from Ireland , I have a set of 2018 Cupra seats that I would love to fit to my 2019 caddy highline. Both van and seats are Airbag and heated. Is this something you would be able to help me with .
Thanks in advanced Ross

stan-the-man · Post by **stan-the-man** » Sun Nov 28, 2021 4:09 pm

Hi Ross
You can email me stachur32@gmail.com

Sent from my iPhone using Tapatalk

Medz · Post by **Medz** » Sun Nov 28, 2021 6:23 pm

+1 for Stan! Great service and knowledge.

Sent from my SM-G998B using Tapatalk

garethrs1800 · Post by **garethrs1800** » Sun Nov 28, 2021 7:49 pm

That ignition bezel looks nice mate where you get it from please mate

Beaker2135 · Post by **Beaker2135** » Mon Nov 29, 2021 7:25 pm

I stole the idea straight from stan-the-man
http://caddy2k.com/forum/viewtopic.php ... &start=30

They were special order from Japan. I got mine from

http://vwmaniacs.com/fs/maniacs/5143413

Not a cheap option @11340 Yen = £79 So about £80 + postage & import duty
It’s all in Japanese so Google translate is your friend
Basically you need a ZenMarket account with enough money in it to complete the sale
You’ll figure it out

CADDY2K.com