Partition net retrofit
- makzimum
- Caddy Fan
- Posts: 63
- Joined: Tue Mar 23, 2021 12:08 pm
- Location: Suffolk
Partition net retrofit
I'm interested in trying to retrofit the factory partition net in my 2020 maxi life. I've had a read of this thread about it but it seems in this case there were already blanked off points to swap for the hanger parts. Mine doesn't have anything there at all currently. Has anyone had a go at this retrofit when there have been no blanked off points to start with?
- anoneamus
- Hyper Poster
- Posts: 1317
- Joined: Tue Sep 30, 2014 8:11 am
- Engine size/power: 2.0 TDI (140bhp)
- Location: Cape Town
Re: Partition net retrofit
If the trim is missing the blanked off points, you'd probably need to replace it with the older version that does have them. You'd then need to weld in bolts into the chassis that were at the correct points to line up with the trim.
- makzimum
- Caddy Fan
- Posts: 63
- Joined: Tue Mar 23, 2021 12:08 pm
- Location: Suffolk
Re: Partition net retrofit
I guess I'll be going for a third party metal partition then!
- anoneamus
- Hyper Poster
- Posts: 1317
- Joined: Tue Sep 30, 2014 8:11 am
- Engine size/power: 2.0 TDI (140bhp)
- Location: Cape Town
- makzimum
- Caddy Fan
- Posts: 63
- Joined: Tue Mar 23, 2021 12:08 pm
- Location: Suffolk
Re: Partition net retrofit
I was thinking along the lines of the one Travall make. Looks a pretty solid fit. No modifications required.