So I have a 2014 caddy maxi, and I want to use it as a camper when needed but mainly a works van.
Setting it up for work is not a problem and removing the contents will be fine.
However it's sticking a row of seats in the back. I want something that's quick and easy to remove where the seat belts are incorporated into the seats like the Vito's and preferably come out as quick as the Vito's.
Does any one know of where I could buy a kit or have any recommendations? I am located in Rochdale.
Thanks
Sent from my CLT-L29 using Tapatalk
Removable seats
-
- Caddy Fan
- Posts: 52
- Joined: Sat Mar 27, 2021 5:56 pm
- Engine size/power: 1.6 CR TDI (102bhp)
-
- 100BHP+
- Posts: 127
- Joined: Mon May 17, 2021 6:10 pm
Re: Removable seats
You could in theory instal something like the Vito seats into the van if you have access underneath to drill and install the fixings.
This does through up questions as to the suitability of the floor for fixing, will it need to be strengthened?
Also, should you go for something like the Vito set up, the fixing points will need to be to spec (which they would anyway), plus if there are belts attached to the seats themselves.
The best bet really would be to stick with the maxi rear bench seats which should be a Lego install once you have all the bits, then deal with them being able to flip forward into the footwells, safest option.
This does through up questions as to the suitability of the floor for fixing, will it need to be strengthened?
Also, should you go for something like the Vito set up, the fixing points will need to be to spec (which they would anyway), plus if there are belts attached to the seats themselves.
The best bet really would be to stick with the maxi rear bench seats which should be a Lego install once you have all the bits, then deal with them being able to flip forward into the footwells, safest option.
-
- 200BHP+
- Posts: 206
- Joined: Mon Jan 04, 2021 1:35 pm
- Engine size/power: 1.6 CR TDI (102bhp)
Re: Removable seats
Touran rear seats come out easy and they are 3 separate seats so aren’t too heavy once unclipped. They are easy enough to install.
The seatbelts aren’t incorporated in the seat though.
The seatbelts aren’t incorporated in the seat though.