Hi Guys.
My Cylinder head bolt hole threads that holds the plate for injectors are damaged. Can helicoil threads repair works.
Your advice will be appreciated.
Sent from my M2006C3MG using Tapatalk
Helicoil
-
- Caddy2k Groupie
- Posts: 47
- Joined: Sun Aug 29, 2021 8:23 pm
- Engine size/power: 1.9 TDI (104bhp)
- Location: Glasgow
Re: Helicoil
long story short, yes.
Used them several times for a large number of problems and they work well, but it must be drilled as straight as possible.
Used them several times for a large number of problems and they work well, but it must be drilled as straight as possible.
-
- Caddy2k Groupie
- Posts: 10
- Joined: Wed Oct 27, 2021 8:32 am
- Contact:
Re: Helicoil
100% you can coil that, I would have it done by a machine shop if possible to get that spot on straight, i did one myself on a Side stand bolt on my bike and the side load from it not being perfect pulled it out over time.
- NZDubNurd
- Hyper Poster
- Posts: 645
- Joined: Fri Oct 24, 2014 3:39 am
- Location: Whangarei, New Zealand
Re: Helicoil
I'd only use a timesert, as you have a second chance if it ever pulls out (and I've never had one pull out).
If you get the right set, it comes with a guide etc.
If you get the right set, it comes with a guide etc.