Random Caddy chat.
Not the place for sale or wanted topics.
Caddy2k Groupie
Posts: 2
Joined: Sat Sep 11, 2021 6:48 am


Post by Mzobanzi »

Hi Guys.

My Cylinder head bolt hole threads that holds the plate for injectors are damaged. Can helicoil threads repair works.

Your advice will be appreciated.

Sent from my M2006C3MG using Tapatalk
Caddy2k Groupie
Posts: 42
Joined: Sun Aug 29, 2021 8:23 pm
Engine size/power: 1.9 TDI (104bhp)
Location: Glasgow

Re: Helicoil

Post by SRAutoSolutions »

long story short, yes.

Used them several times for a large number of problems and they work well, but it must be drilled as straight as possible.
Caddy2k Groupie
Posts: 8
Joined: Wed Oct 27, 2021 8:32 am

Re: Helicoil

Post by DucatiTodd »

100% you can coil that, I would have it done by a machine shop if possible to get that spot on straight, i did one myself on a Side stand bolt on my bike and the side load from it not being perfect pulled it out over time.
User avatar
Hyper Poster
Posts: 549
Joined: Fri Oct 24, 2014 3:39 am
Location: Whangarei, New Zealand

Re: Helicoil

Post by NZDubNurd »

I'd only use a timesert, as you have a second chance if it ever pulls out (and I've never had one pull out).

If you get the right set, it comes with a guide etc.
Post Reply