turbine wheels
-
- Caddy2k Groupie
- Posts: 12
- Joined: Wed Nov 10, 2021 7:04 pm
- Engine size/power: 1.6 CR TDI (75bhp)
turbine wheels
Hi guys im thinking of upgrading the wheels on my 2012 caddy i need to know if a set of scirocco 18 turbines would be a straight fit and speedo be ok
-
- Caddy2k Groupie
- Posts: 32
- Joined: Mon Oct 04, 2021 11:11 pm
- Engine size/power: 1.6 CR TDI (75bhp)
turbine wheels
Hey mate
Literally just fitted a set of the scirocco interlagos onto mine and when straight on. As long as the studs and pcd match which should be 5 stud x 112 and the centre bore is the same they’re fine. I think centre bore is 57.1
Fitted mine to 11 plate. No problems either with the offset. I’ll ping a photo over at some point.
Also I checked Speedo with a couple of iPhone apps before and after and made around 1mph difference but I was 4mph out anyway (under obviously)
Along as the rolling diameter is less than 1% I think they’re normally ok. I remember I checked this myself and I think the rolling diameter was just under 1%. Just make sure you get the right tyres
Sent from my iPhone using Tapatalk
Literally just fitted a set of the scirocco interlagos onto mine and when straight on. As long as the studs and pcd match which should be 5 stud x 112 and the centre bore is the same they’re fine. I think centre bore is 57.1
Fitted mine to 11 plate. No problems either with the offset. I’ll ping a photo over at some point.
Also I checked Speedo with a couple of iPhone apps before and after and made around 1mph difference but I was 4mph out anyway (under obviously)
Along as the rolling diameter is less than 1% I think they’re normally ok. I remember I checked this myself and I think the rolling diameter was just under 1%. Just make sure you get the right tyres
Sent from my iPhone using Tapatalk
-
- Caddy2k Groupie
- Posts: 12
- Joined: Wed Nov 10, 2021 7:04 pm
- Engine size/power: 1.6 CR TDI (75bhp)
Re: turbine wheels
thanks for that mate id like to see a pic if possible
- Giddy
- Hyper Poster
- Posts: 2151
- Joined: Fri Aug 24, 2018 5:56 pm
- Engine size/power: 1.4TSI
- Location: Gloucestershire, UK
Re: turbine wheels
I'm fairly sure it's quite a few of them and lots of others in Caddy alloy thread https://www.caddy2k.com/forum/viewtopic.php?f=12&t=797
-
- Caddy2k Groupie
- Posts: 32
- Joined: Mon Oct 04, 2021 11:11 pm
- Engine size/power: 1.6 CR TDI (75bhp)
Re: turbine wheels
Appreciate it’s dark will take another tomorrow
Sent from my iPhone using Tapatalk
Sent from my iPhone using Tapatalk
-
- Caddy2k Groupie
- Posts: 32
- Joined: Mon Oct 04, 2021 11:11 pm
- Engine size/power: 1.6 CR TDI (75bhp)
Re: turbine wheels
Here’s the code for what I fitted
3C8 601 025
8.0Jx18H2
Sent from my iPhone using Tapatalk
3C8 601 025
8.0Jx18H2
Sent from my iPhone using Tapatalk
-
- Caddy Fan
- Posts: 53
- Joined: Sun Oct 15, 2017 8:51 pm
Re: turbine wheels
19’s on mine and they are fine
Sent from my iPhone using Tapatalk
Sent from my iPhone using Tapatalk
-
- Caddy2k Groupie
- Posts: 32
- Joined: Mon Oct 04, 2021 11:11 pm
- Engine size/power: 1.6 CR TDI (75bhp)
Re: turbine wheels
Here’s a link I found useful for checking rolling diameters
https://alloywheels.com/tyreCalculator
Sent from my iPhone using Tapatalk
https://alloywheels.com/tyreCalculator
Sent from my iPhone using Tapatalk