LOLWinst wrote:
Not just yet mate.
Winst's caddy
-
- Caddy Fan
- Posts: 66
- Joined: Tue Apr 21, 2015 3:14 pm
- Engine size/power: 1.8 20V Turbo
- Location: Ireland
Re: Winst's caddy
- Winst
- Hyper Poster
- Posts: 619
- Joined: Wed Jul 17, 2013 10:19 pm
- Engine size/power: 2.0 CR TDI (138bhp)
- Location: Lake District
Re: Winst's caddy
the long one wrote:What type of switch did you use to enable the power fold ? Any pics of this ?
Lovely van this and a nice colour !
Love the brakes too - fill the wheel gap well
I Used the switch that came from Touran the mirrors came from mate, Adam87 sourced everything I needed, I'm away this week, I'll get a pic up when I get back bud.
Adam87 wrote:Looking spot on Wayne! You've made a quick and quality turn around on them mirrors
I blame you 100% for the mirrors mate , after seeing yours I had to get my finger out
Looks like tail lights are next.
2011 2.0tdi Full 2018 front and rear ends fitted, airlift 3P suspension, 20" alloys, modified Porsche calipers front and rear with R8 handbrake caliper, Audi RS4 wingbacks, covered in nappa leather and alcantara, Touran dash, door cards, centre console all trimmed in leather and alcantara, MFSW, 3D cluster, Rockford fosgate and focal sounds with MIB2, bi xenons, full alltrack kit fitted, etc etc:D
Instagram @2kwayne
Instagram @2kwayne
-
- Hyper Poster
- Posts: 1299
- Joined: Wed Oct 05, 2011 1:33 pm
Re: Winst's caddy
When you get a chance can you take a picture of the switch?
- Winst
- Hyper Poster
- Posts: 619
- Joined: Wed Jul 17, 2013 10:19 pm
- Engine size/power: 2.0 CR TDI (138bhp)
- Location: Lake District
Re: Winst's caddy
I.D.S. wrote:When you get a chance can you take a picture of the switch?
Yeah no worries, will do mate.
2011 2.0tdi Full 2018 front and rear ends fitted, airlift 3P suspension, 20" alloys, modified Porsche calipers front and rear with R8 handbrake caliper, Audi RS4 wingbacks, covered in nappa leather and alcantara, Touran dash, door cards, centre console all trimmed in leather and alcantara, MFSW, 3D cluster, Rockford fosgate and focal sounds with MIB2, bi xenons, full alltrack kit fitted, etc etc:D
Instagram @2kwayne
Instagram @2kwayne
- Adam87
- Hyper Poster
- Posts: 2153
- Joined: Sat May 28, 2011 1:00 am
- Engine size/power: 1.2 TSI (84bhp)
Re: Winst's caddy
I've ordered a few sets yesterdayWinst wrote: Looks like tail lights are next.
- Winst
- Hyper Poster
- Posts: 619
- Joined: Wed Jul 17, 2013 10:19 pm
- Engine size/power: 2.0 CR TDI (138bhp)
- Location: Lake District
Re: Winst's caddy
Give me a shout mate if you get a spare set , not 100% sure if there's a difference between lights from a tailgate and barn doors mate.Adam87 wrote: I've ordered a few sets yesterday
2011 2.0tdi Full 2018 front and rear ends fitted, airlift 3P suspension, 20" alloys, modified Porsche calipers front and rear with R8 handbrake caliper, Audi RS4 wingbacks, covered in nappa leather and alcantara, Touran dash, door cards, centre console all trimmed in leather and alcantara, MFSW, 3D cluster, Rockford fosgate and focal sounds with MIB2, bi xenons, full alltrack kit fitted, etc etc:D
Instagram @2kwayne
Instagram @2kwayne
- Winst
- Hyper Poster
- Posts: 619
- Joined: Wed Jul 17, 2013 10:19 pm
- Engine size/power: 2.0 CR TDI (138bhp)
- Location: Lake District
Re: Winst's caddy
2011 2.0tdi Full 2018 front and rear ends fitted, airlift 3P suspension, 20" alloys, modified Porsche calipers front and rear with R8 handbrake caliper, Audi RS4 wingbacks, covered in nappa leather and alcantara, Touran dash, door cards, centre console all trimmed in leather and alcantara, MFSW, 3D cluster, Rockford fosgate and focal sounds with MIB2, bi xenons, full alltrack kit fitted, etc etc:D
Instagram @2kwayne
Instagram @2kwayne
-
- 100BHP+
- Posts: 197
- Joined: Mon May 19, 2014 3:46 pm
- Engine size/power: 1.4 16V Petrol (79bhp)
- Location: north wales
Re: Winst's caddy
Did you need to change the door modules to get the power fold to work ?
- Adam87
- Hyper Poster
- Posts: 2153
- Joined: Sat May 28, 2011 1:00 am
- Engine size/power: 1.2 TSI (84bhp)
Winst's caddy
Yes you will need to
Part numbers needed
1T0959701AA
1T0959702S
Part numbers needed
1T0959701AA
1T0959702S
- Winst
- Hyper Poster
- Posts: 619
- Joined: Wed Jul 17, 2013 10:19 pm
- Engine size/power: 2.0 CR TDI (138bhp)
- Location: Lake District
Re: Winst's caddy
As Adam says yes I had to, you maybe lucky and not need to but I didn't have any luck there I think they look better and it's 1 way of stopping mirror whistle although not quite as cheap as a piece of foam though
2011 2.0tdi Full 2018 front and rear ends fitted, airlift 3P suspension, 20" alloys, modified Porsche calipers front and rear with R8 handbrake caliper, Audi RS4 wingbacks, covered in nappa leather and alcantara, Touran dash, door cards, centre console all trimmed in leather and alcantara, MFSW, 3D cluster, Rockford fosgate and focal sounds with MIB2, bi xenons, full alltrack kit fitted, etc etc:D
Instagram @2kwayne
Instagram @2kwayne
-
- Hyper Poster
- Posts: 1537
- Joined: Sun Apr 15, 2012 1:30 pm
- Engine size/power: 1.0 TSI (100bhp)
- Location: Milton Keynes
Re: Winst's caddy
STOP finding new things to do
- Winst
- Hyper Poster
- Posts: 619
- Joined: Wed Jul 17, 2013 10:19 pm
- Engine size/power: 2.0 CR TDI (138bhp)
- Location: Lake District
Re: Winst's caddy
mkvanman wrote:STOP finding new things to do
I can't!!! I've tried, it's like a drug, I blame this forum
2011 2.0tdi Full 2018 front and rear ends fitted, airlift 3P suspension, 20" alloys, modified Porsche calipers front and rear with R8 handbrake caliper, Audi RS4 wingbacks, covered in nappa leather and alcantara, Touran dash, door cards, centre console all trimmed in leather and alcantara, MFSW, 3D cluster, Rockford fosgate and focal sounds with MIB2, bi xenons, full alltrack kit fitted, etc etc:D
Instagram @2kwayne
Instagram @2kwayne
-
- Hyper Poster
- Posts: 610
- Joined: Sat Jan 19, 2013 8:03 pm
- Engine size/power: 1.9 TDI (104bhp)
- Location: plymouth
Re: Winst's caddy
Was there anything else required ? looms ? new switch of course any idea of part numbers ?Adam87 wrote:Yes you will need to
Part numbers needed
1T0959701AA
1T0959702S
Thanks in advance
104 bhp maxi - 6 speed o2q conversion - rcd 510 dab c/w Bluetooth & mdi - remap 162 bhp - facelift highline cluster - caddy 4 tail lights - 19” vw motorsport alloys - bilstein/eibach sportline suspension - r32 front brakes - scirocco front seats - caddy life centre console - mk6 flat bottom mfsw - caddy 4 folding mirrors
- Adam87
- Hyper Poster
- Posts: 2153
- Joined: Sat May 28, 2011 1:00 am
- Engine size/power: 1.2 TSI (84bhp)
Re: Winst's caddy
Just need switch mirrors and door modules looms stay same if your door modules are already gen3
-
- Hyper Poster
- Posts: 610
- Joined: Sat Jan 19, 2013 8:03 pm
- Engine size/power: 1.9 TDI (104bhp)
- Location: plymouth
Re: Winst's caddy
any idea of part numbers ? gen 3 from when ? 2010 (59) maxiAdam87 wrote:Just need switch mirrors and door modules looms stay same if your door modules are already gen3
thanks
104 bhp maxi - 6 speed o2q conversion - rcd 510 dab c/w Bluetooth & mdi - remap 162 bhp - facelift highline cluster - caddy 4 tail lights - 19” vw motorsport alloys - bilstein/eibach sportline suspension - r32 front brakes - scirocco front seats - caddy life centre console - mk6 flat bottom mfsw - caddy 4 folding mirrors