Toffee delights

Show off your caddy
FishermansFriend
Hyper Poster
Posts: 889
Joined: Wed Jun 17, 2020 12:10 pm
Location: Ireland Dublin

Re: Toffee delights

Post by FishermansFriend »

Brakes look brilliant Lister.
User avatar
Lister79
Hyper Poster
Posts: 2126
Joined: Fri Jan 20, 2017 8:38 pm
Engine size/power: 2.0TSI EA888 Gen3
Location: Lake District

Re: Toffee delights

Post by Lister79 »

Cheers mate.


Sent from my iPhone using Tapatalk
2014 Toffee Brown with EA888 Gen 3 2.0 TSi (CJX) engine (417.5 BHP 545 Nm), Grinds/ABP air suspension and a few other mods :D
Build thread:
http://caddy2k.com/forum/viewtopic.php?f=13&t=36629
User avatar
Danwatts18
100BHP+
Posts: 135
Joined: Thu Sep 19, 2019 9:57 pm

Re: Toffee delights

Post by Danwatts18 »

Such a good build

Credit where credits due, you can't fault it.

Can't wait to see it on the floor :mrgreen:
DWAUTOMOTIVE
Vehicle Tracking ~ Security ~ Modifications ~ Dash Cams ~ Wiring
Autowatch Ghost MetaTrak ScorpionTrack SmarTrack AirliftPerformance Intermotiv Rotiform Wheels
User avatar
Lister79
Hyper Poster
Posts: 2126
Joined: Fri Jan 20, 2017 8:38 pm
Engine size/power: 2.0TSI EA888 Gen3
Location: Lake District

Re: Toffee delights

Post by Lister79 »

Cheers mate.

Neither can I. Still a bit off being finished yet, but really looking forward to being able to drive it again.


Sent from my iPhone using Tapatalk
2014 Toffee Brown with EA888 Gen 3 2.0 TSi (CJX) engine (417.5 BHP 545 Nm), Grinds/ABP air suspension and a few other mods :D
Build thread:
http://caddy2k.com/forum/viewtopic.php?f=13&t=36629
User avatar
Lister79
Hyper Poster
Posts: 2126
Joined: Fri Jan 20, 2017 8:38 pm
Engine size/power: 2.0TSI EA888 Gen3
Location: Lake District

Re: Toffee delights

Post by Lister79 »

House bound for a while but still managed to get a couple of bits done for when I start working on the van again.
Made an air duct as I thought the front edge of the air filter housing looked slightly un-finished, obviously it’s designed for a MK7 hood so the intake is different.
Also Nikki [mention]Twinsport [/mention]finished updating and coding my new cluster, just need to swap over the front housing. Fully updated for the golden dots and new Caddy diagram; I especially like the text on the emergency phone page ImageImage.

Air duct

Image

Image

Image

Image

Image

New cluster

Image

Image

Image

All in the detail Image

Image

Image


Sent from my iPhone using Tapatalk
2014 Toffee Brown with EA888 Gen 3 2.0 TSi (CJX) engine (417.5 BHP 545 Nm), Grinds/ABP air suspension and a few other mods :D
Build thread:
http://caddy2k.com/forum/viewtopic.php?f=13&t=36629
User avatar
NikMoq
Caddy2k Groupie
Posts: 40
Joined: Sat Nov 02, 2019 8:22 pm
Engine size/power: 2.0 TDI (140bhp)

Re: Toffee delights

Post by NikMoq »

Wow

Отправлено с моего SM-G770F через Tapatalk

Caddy 2020 2.0tdi 4motion
User avatar
brooneye
Hyper Poster
Posts: 1488
Joined: Sun Jan 17, 2016 6:51 pm
Engine size/power: 1.8 20V Turbo

Re: Toffee delights

Post by brooneye »

Cracking touches on the clocks mate. Really looking forward to seeing this


Sent from my iPhone using Tapatalk
judasfan
Caddy Fan
Posts: 50
Joined: Sun Mar 21, 2021 6:38 am
Engine size/power: 1.4TSI

Re: Toffee delights

Post by judasfan »

Hello @Lister79, could you be so kind to share some details, what is the part number of the color 3D cluster, which you used for donor?
Last edited by Giddy on Sun Apr 04, 2021 8:35 pm, edited 1 time in total.
Reason: Removed unnecessary picture quote
User avatar
Lister79
Hyper Poster
Posts: 2126
Joined: Fri Jan 20, 2017 8:38 pm
Engine size/power: 2.0TSI EA888 Gen3
Location: Lake District

Toffee delights

Post by Lister79 »

Hi my latest cluster was made using 2 clusters; A SEAT Alhambra cluster part number 7N5920980C, which then had the hardware mod for the handbrake done and a full software update, and then the dial foils were taken from a face lift Scirroco cluster part number 1K8920975F. If you can find one, it’s a lot easier to just get a 3D cluster from a Scirroco but I gave up looking, plus following my engine conversion and due to the ECU’s I’ve used my van now has the MQB (AES) immo chip. This is the main reason I used the SEAT cluster as when I tried a basic Scirroco cluster it didn’t like the immo data.


Sent from my iPhone using Tapatalk
2014 Toffee Brown with EA888 Gen 3 2.0 TSi (CJX) engine (417.5 BHP 545 Nm), Grinds/ABP air suspension and a few other mods :D
Build thread:
http://caddy2k.com/forum/viewtopic.php?f=13&t=36629
User avatar
Sabbunsingh
Hyper Poster
Posts: 790
Joined: Sat Jan 01, 2011 1:52 pm
Engine size/power: 1.2 TSI (84bhp)
Location: Derby

Re: Toffee delights

Post by Sabbunsingh »

Awesome work on this dude.

Sent from my SM-G981B using Tapatalk

V2 front. Mk5 mirrors. Cupra splitter. 8000k Hid. Led side lights and drl. Lowered on mk5 coils and custom shackles. Touran carpet,door cards,plastics,glovebox and seat bases. New caddy steering wheel. Midline cluster. Cruise. Heated mk5 gttdi seats wired and working. Alpine screen. 140 remap. Lots of other little bits.........
judasfan
Caddy Fan
Posts: 50
Joined: Sun Mar 21, 2021 6:38 am
Engine size/power: 1.4TSI

Re: Toffee delights

Post by judasfan »

Hello, thank you for the detailed answer! I have Skoda Yeti, on which I put 3D cluster from Tiguan, I am aware of the mod for switching between EPB and handbrake. I think my main problem with the Caddy will be, that it's CNG. The dials can be swapped easily, but don't know if SW for CNG car would be accepted by regular petrol or diesel cluster!
Last edited by Lister79 on Mon Apr 05, 2021 7:26 am, edited 1 time in total.
Reason: Quote removed
User avatar
Lister79
Hyper Poster
Posts: 2126
Joined: Fri Jan 20, 2017 8:38 pm
Engine size/power: 2.0TSI EA888 Gen3
Location: Lake District

Re: Toffee delights

Post by Lister79 »

[mention]Sabbunsingh [/mention] cheers mate.

[mention]judasfan [/mention] I wouldn’t have thought it would be an issue but I’m not sure. Create a topic in the technical section and someone should be able to answer your question.


Sent from my iPhone using Tapatalk
2014 Toffee Brown with EA888 Gen 3 2.0 TSi (CJX) engine (417.5 BHP 545 Nm), Grinds/ABP air suspension and a few other mods :D
Build thread:
http://caddy2k.com/forum/viewtopic.php?f=13&t=36629
User avatar
hef355
Hyper Poster
Posts: 2246
Joined: Tue Mar 28, 2017 1:02 pm
Engine size/power: 1.2 TSI (84bhp)
Location: Wales

Re: Toffee delights

Post by hef355 »

Love the cluster upgrades Chris! Another fine attention to detail job! Fab mate well done


Sent from my iPhone using Tapatalk
judasfan
Caddy Fan
Posts: 50
Joined: Sun Mar 21, 2021 6:38 am
Engine size/power: 1.4TSI

Re: Toffee delights

Post by judasfan »

Thank you, but I am still a rookie and can't do this! 8)
Last edited by Lister79 on Mon Apr 05, 2021 9:04 pm, edited 1 time in total.
Reason: Quote removed
User avatar
Lister79
Hyper Poster
Posts: 2126
Joined: Fri Jan 20, 2017 8:38 pm
Engine size/power: 2.0TSI EA888 Gen3
Location: Lake District

Re: Toffee delights

Post by Lister79 »

Managed to get some time on the van last night and today so started mocking up and fitting the management side of the suspension.

Front leader hoses installed, welded some brake pipe brackets to hold the bulkheads.

Image

Compressor and tank mounting plate mocked up, thanks to [mention]Doc [/mention] for the suggestion of adding an air cooling ring, should help with water management. System will have 2 auto traps prior to tank entry and one manual trap on the valve block feed line.

Image

Image

Image

Valve block positioned, I’m aiming for a completely hidden setup.

Image

Also tried the air duct to see what it would look like.

Image


Sent from my iPhone using Tapatalk
2014 Toffee Brown with EA888 Gen 3 2.0 TSi (CJX) engine (417.5 BHP 545 Nm), Grinds/ABP air suspension and a few other mods :D
Build thread:
http://caddy2k.com/forum/viewtopic.php?f=13&t=36629
Post Reply