Page 16 of 16

Re: Mk IV Caddy 2.0 102 Startline BMT

Posted: Wed Apr 15, 2020 7:42 pm
by Fensider
Great looking Caddy mate

Re: Mk IV Caddy 2.0 102 Startline BMT

Posted: Sun Apr 19, 2020 6:14 pm
by ViralEye
So having bought puddle lights a good few months ago, it was time to get them fitted!!

With great difficulty I managed to dremmel out the holes which was by far the trickiest bit! I really wanted it to be perfect but I'll give it a 7 out of 10 Image

Taking the door cards and wing mirror was all relatively easy, but the. Feeding the loom through with the current wiring took me a bit to figure out.

Anyway, coded both doors, tested, refit everything and step back to admire my handy workImageImageImageImageImageImageImageImageImageImage

Re: Mk IV Caddy 2.0 102 Startline BMT

Posted: Mon Apr 20, 2020 5:41 pm
by ViralEye
Ordered a new rail cover, but due to this Covid crap there was a delay, but today it finally arrived!!

Before and after below!ImageImage

Re: Mk IV Caddy 2.0 102 Startline BMT

Posted: Thu Apr 23, 2020 6:40 pm
by RyanG94
Vans look amazing from where it started just a quick question the bumpers you had pained where they the original black plastic ones? Or did you have to buy new ones and get them pained?
Many thanks
Ryan

Re: Mk IV Caddy 2.0 102 Startline BMT

Posted: Thu Apr 23, 2020 6:53 pm
by ViralEye
They were original black plastic mate. In the future I'll probably get them redone but for now they'll do

Re: Mk IV Caddy 2.0 102 Startline BMT

Posted: Fri May 08, 2020 10:29 pm
by ViralEye
So a few people know I've had a few knocking issues with my BC racing coilovers so changed over to rubber top mounts instead.... And noise be gone!

ImageImageImageImageImageImageImage

Re: Mk IV Caddy 2.0 102 Startline BMT

Posted: Fri May 08, 2020 10:30 pm
by ViralEye
Forgot to say, alignment again on my monday too so will be good to see how they compare to the camber plates

Re: Mk IV Caddy 2.0 102 Startline BMT

Posted: Sat May 09, 2020 12:07 am
by Doc
Did you find anything that was obviously loose or worn on the adjustable top mounts?
Mine have been flawless for best part of three years but I will be rebuilding with new bearings soon.

Re: Mk IV Caddy 2.0 102 Startline BMT

Posted: Sat May 09, 2020 11:32 am
by ViralEye
Cannot find a single thing loose, hitting, or anything. Tried literally everything so can only put it down to noisy camber plates? But before I took the camber plates off they felt solid but I suppose me wiggling them about isn't going to replicate the noise I could hear

Annoying, but is what it is