Page 5 of 16

Re: Sarbs new caddy

Posted: Sat Jul 04, 2020 10:34 pm
by tonyhill
Regarding the spoiler, how soon after bonding can you drive it, does it form a strong bond fairly quickly, or are you best leaving it for a few hours??

Re: Sarbs new caddy

Posted: Sat Jul 04, 2020 10:36 pm
by Sabbunsingh
Mine was left for around 5hrs with tape holding it in place. Was solid enough after that.

Sent from my SM-G960F using Tapatalk


Re: Sarbs new caddy

Posted: Wed Jul 22, 2020 5:40 am
by Shassen
@Sabbunsingh

Hi.

Very nice looking van there.

The MB wheels? Are they 8,5" in front and 9" in the back?

Re: Sarbs new caddy

Posted: Wed Jul 29, 2020 10:31 pm
by Sabbunsingh
Shassen wrote:@Sabbunsingh

Hi.

Very nice looking van there.

The MB wheels? Are they 8,5" in front and 9" in the back?
8 front and 8.5 rear

Sent from my SM-G960F using Tapatalk


Re: Sarbs new caddy

Posted: Wed Jul 29, 2020 10:36 pm
by Sabbunsingh
Van got put on the dyno. Made an impressive 192 hp and a load of torque. The map that matt from dubunit put on is top notch. Just hope my 5 speed box holds strong.
Dyno run made me really happy so I treated it to a wash and finally put my plate on.ImageImageImageImageImage

Sent from my SM-G960F using Tapatalk





Re: Sarbs new caddy

Posted: Thu Jul 30, 2020 11:20 am
by Stedlocks
Very nice bud....!
I think the red reflection of the ramp post in the dyno picture looks like a decal.....i love it! :lol:

Re: Sarbs new caddy

Posted: Sat Aug 01, 2020 8:14 pm
by Papa Bear
Red reflection made me think of the A team

Re: Sarbs new caddy

Posted: Mon Aug 03, 2020 6:30 am
by Shassen
Sabbunsingh wrote: Wed Jul 29, 2020 10:31 pm 8 front and 8.5 rear

Sent from my SM-G960F using Tapatalk
@Sabbunsingh

You sure about 8,5 in the rear? I was in contact with MB to check on prices and I got the reply that it's available in three different sizes.

8x20 ET42
9x20 ET54
9,5x20 ET57

Re: Sarbs new caddy

Posted: Sat Aug 08, 2020 11:46 am
by Sabbunsingh
Shassen wrote: @Sabbunsingh

You sure about 8,5 in the rear? I was in contact with MB to check on prices and I got the reply that it's available in three different sizes.

8x20 ET42
9x20 ET54
9,5x20 ET57
I am 99 percent sure rear is 8.5

Sent from my SM-G960F using Tapatalk


Re: Sarbs new caddy

Posted: Mon Aug 10, 2020 6:29 am
by Shassen
Sabbunsingh wrote: Sat Aug 08, 2020 11:46 am I am 99 percent sure rear is 8.5

Sent from my SM-G960F using Tapatalk
All right. Thanks.

Re: Sarbs new caddy

Posted: Fri Aug 14, 2020 2:15 am
by VeeCee
Stunning van...quite possibly the nicest wheels I've seen on a caddy so far 8)

Re: Sarbs new caddy

Posted: Tue Aug 18, 2020 12:13 am
by Sabbunsingh
VeeCee wrote:Stunning van...quite possibly the nicest wheels I've seen on a caddy so far 8)
Cheers dude

Sent from my SM-G960F using Tapatalk


Re: Sarbs new caddy

Posted: Wed Sep 23, 2020 2:36 pm
by Sabbunsingh
After seeing a few threads about newer stalks I went on the hunt for some. Got an ebay bargain for a set and had a little play. The look is alot better and the fit works better with newer flat bottom steering wheel. I used to sometimes catch my hands on the standard stalks, these sit at a better angle and have more clearance.
Also put the van in winter mode with s3 alloys on all season tyres and raised up by 15mm on the front and 1 hole on the rear. Van drives so much better and smoother. I can clear bumps without issues now lol. I will refurb the 20's over winter ready for next year. Thinking an antique brass/dark gold colour.
ImageImageImageImageImageImage

Re: Sarbs new caddy

Posted: Wed Dec 02, 2020 5:13 pm
by Sabbunsingh
Managed to get a passenger light second hand and got a drivers side brand new. Cannot wait to get these fitted. ImageImage

Sent from my SM-G981B using TapatalkImage

Sent from my SM-G981B using Tapatalk


Re: Sarbs new caddy

Posted: Thu Dec 03, 2020 9:23 am
by phil
they will look great, ive been hunting for ages for any of these but with no avail. where did you source yours?