CADDY2K.com

Got my covers made by some professionals sewers, after I fed up of how long it took me to make just one cover

Sent from my SM-G950F using Tapatalk

I struggled a little doing the fog lights months ago so I thought I'd do a little write up of how I got through the fire wall.

There is a rubber panel in the firewall just behind the engine under the insulation that a gasket went perfect in too and then there a plastic panel behind the fuses that with a little modified extrusion for a hole cutter I could reach to put a hole in it, I used some long bar to drive the cables through both holes and used another gasket and some silicone to seal the hole in the plastic behind the fuses.

Sent from my SM-G950F using Tapatalk

Did you conected the fog lights to the BCM or you used the method with the relay?
I bought also a fog lights kit but the harness is made for the relay method so I have to modify it. I bought also a 30 bit highline BCM from a Passat because I want also to activate cornering function, and my BCM didn't even suported the front fog lights. I only need time to do the job, like you said, it's a lot of work and takes time.
Good luck with the project!

It came with an extra relay, it was just the travelin-lite kit they do and I did it as per instructions Haha I didnt know about connecting them to the BCM

Sent from my SM-G950F using Tapatalk

This is a nice looking build mate. The work you’ve done in the back looks super neat
One question though....what work did you do that required a sledgehammer???


Sent from my iPhone using Tapatalk

@the swan fiend thank you mate, oh the sledgehammer I was using it only as a weight because I bonded those wood strips so along the edge so I had thinker material to screw the bed frame down to keep it secure, instead of just going through the laminate so only the side I know I've got just under 20mm at least to screw in too

Sent from my SM-G950F using Tapatalk

That’s a good use of a sledge mate! Beats using it for dent removal


Sent from my iPhone using Tapatalk

Remembered to take some photos of how I butchered the dash for the touran glove box while fitting my speakers today lol

Sent from my SM-G950F using Tapatalk

The passenger side is all wired in with my new vibe black air component speakers I trailed the tweeter cable through the loom bit. Need to make some adaptors out of some ply for the tweeters now and sort the touran door card out needs trimming round the mirror bit.

Sent from my SM-G950F using Tapatalk

Those door shut wiring loom boots are such a pain to unplug the first time!

Looking clean

That one wasnt to bad for me luckily

Thanks man

Sent from my SM-G950F using Tapatalk

Here's my little mount I made for the tweeter, out of some 2mm ply i made a stencil then just cut it out and painted it with Matt black paint

Sent from my SM-G970F using Tapatalk

Just a quick update for some of the stuff been doing over past couple weeks, progress has really slow down on the van because of work, but re covered my arm rest ready to fit my touran centre console and changed the gear knob, and got some.heated half electric passat seats

Sent from my SM-G970F using Tapatalk

How have you installed the camera to the rcd330 I have the same setup and I think the camera is the same looks oem but it doesn’t connect to the head unit for some reason I was told I need an adapter to make it av but it is and about camera so I’m stuck.


Sent from my iPhone using Tapatalk

@JusrajC did you manage to find someone with VCDS local to you, as I said on instagram you may still need to turn it on, I've bought a 12v camera filter just off ebay but I'm still having problems as mine has stopped working, or do you mean about like the cables and that?

Sent from my SM-G970F using Tapatalk