2008 1.9TDI Black Caddy Build

Show off your caddy
the_official_ajd
Caddy2k Groupie
Posts: 5
Joined: Thu Apr 16, 2020 9:01 pm
Engine size/power: 1.9 TDI (104bhp)

2008 1.9TDI Black Caddy Build

Post by the_official_ajd » Mon Aug 17, 2020 11:23 am

So I bought a stock black caddy with the colour coded front and rear bumpers back at the end of March. The caddy had 178,000KM on it. The main things I wanted to do to it were, new seats, something with the lights (hated the stock super yellow/orange headlights) and ply line the rear.ImageImage

Sent from my SM-A105FN using Tapatalk


the_official_ajd
Caddy2k Groupie
Posts: 5
Joined: Thu Apr 16, 2020 9:01 pm
Engine size/power: 1.9 TDI (104bhp)

Re: 2008 1.9TDI Black Caddy Build

Post by the_official_ajd » Tue Aug 18, 2020 6:48 pm

First simple upgrade to do was change out the old worn gear stick with something clean. Just ordered a cheap one from Ebay, was a bit disappointing that the resin bit on the top was cracked during shipping. Still on the look out for something a bit higher end looking. If anyone has any ideas please let me know.ImageImage

Sent from my SM-A105FN using Tapatalk


User avatar
neil278
Caddy2k Groupie
Posts: 36
Joined: Sat Aug 17, 2019 7:29 pm
Engine size/power: 1.9 TDI (104bhp)

Re: 2008 1.9TDI Black Caddy Build

Post by neil278 » Thu Aug 27, 2020 6:03 pm

Where did you get the gear knob and gaiter from?

the_official_ajd
Caddy2k Groupie
Posts: 5
Joined: Thu Apr 16, 2020 9:01 pm
Engine size/power: 1.9 TDI (104bhp)

Re: 2008 1.9TDI Black Caddy Build

Post by the_official_ajd » Thu Aug 27, 2020 6:16 pm

The gear knob and gaiter are one complete piece. I bought mine off of Ebay. Just searched for 2008 caddy gear knob.

Sent from my SM-A105FN using Tapatalk


sylwiu_3gta
Caddy Fan
Posts: 63
Joined: Sun Dec 02, 2018 2:45 pm
Engine size/power: 1.9 TDI (104bhp)

Re: 2008 1.9TDI Black Caddy Build

Post by sylwiu_3gta » Fri Aug 28, 2020 7:19 pm

You could go for the Golf 6 or 7 GTI models if you want a high end look ;)

Post Reply