Page 1 of 1
2008 1.9TDI Black Caddy Build
Posted: Mon Aug 17, 2020 11:23 am
by the_official_ajd
So I bought a stock black caddy with the colour coded front and rear bumpers back at the end of March. The caddy had 178,000KM on it. The main things I wanted to do to it were, new seats, something with the lights (hated the stock super yellow/orange headlights) and ply line the rear.
Sent from my SM-A105FN using Tapatalk
Re: 2008 1.9TDI Black Caddy Build
Posted: Tue Aug 18, 2020 6:48 pm
by the_official_ajd
First simple upgrade to do was change out the old worn gear stick with something clean. Just ordered a cheap one from Ebay, was a bit disappointing that the resin bit on the top was cracked during shipping. Still on the look out for something a bit higher end looking. If anyone has any ideas please let me know.
Sent from my SM-A105FN using Tapatalk
Re: 2008 1.9TDI Black Caddy Build
Posted: Thu Aug 27, 2020 6:03 pm
by neil278
Where did you get the gear knob and gaiter from?
Re: 2008 1.9TDI Black Caddy Build
Posted: Thu Aug 27, 2020 6:16 pm
by the_official_ajd
The gear knob and gaiter are one complete piece. I bought mine off of Ebay. Just searched for 2008 caddy gear knob.
Sent from my SM-A105FN using Tapatalk
Re: 2008 1.9TDI Black Caddy Build
Posted: Fri Aug 28, 2020 7:19 pm
by sylwiu_3gta
You could go for the Golf 6 or 7 GTI models if you want a high end look
Re: 2008 1.9TDI Black Caddy Build
Posted: Mon Oct 05, 2020 11:44 am
by the_official_ajd
I also bought a new set of ventilation control knobs off of ebay.
Sent from my SM-A105FN using Tapatalk
Re: 2008 1.9TDI Black Caddy Build
Posted: Mon Oct 05, 2020 11:53 am
by the_official_ajd
The next addition to the cockpit was the revamp the steering wheel. I didn't want to go for a GTI wheel as I'm not gone on the look of them.
What I did do was buy an Alcantara cover on ebay that you stitch on yourself. Theres a bit of work in stitching it on, but it's well worth it. I've been driving with it for a few months now and it's fantastic (Especially on cold mornings)
I then got my friend to carbon wrap the 3 soft rubber pieces on the wheel and also the centre ring around the VW logo.
Sent from my SM-A105FN using Tapatalk
Re: 2008 1.9TDI Black Caddy Build
Posted: Wed Oct 07, 2020 11:30 am
by nickyg
steering wheel looks good, will have to grab one of those myself
Re: 2008 1.9TDI Black Caddy Build
Posted: Thu Oct 08, 2020 9:10 am
by ACalamita
Later model Polo gear sticks work well too and usually cheaper to come across than Golf Mk6/7 ones.
Fitted one to mine and it's made a huge improvement.
You'll need to swap the base over from the gaitor though. It's simple enough to do though.