Page 1 of 6

Build SDI to TDI

Posted: Fri Nov 27, 2020 6:15 pm
by Lcm evolution
HI all,

i am sure there has been a lot of people doing this build so this build wont come to anything out of the ordinary.
I do like to try and do everything my self to keep the cost down.
so here it is a 2010 caddy SDI , i bought for £500 due to the engine knocking , ( upon inspection it has ZERO oil in the engine )

I have some parts for the engine conversion from other projects iv had previously i will upload some pictures shortly.

Re: Build SDI to TDI

Posted: Fri Nov 27, 2020 6:40 pm
by Lcm evolution
hi again all,

here is the van ex British gas ?
it cleans up not to bad the body work has some poor bits but it’s to be expected i’m going to have a bash at repairing and painting my self ... what’s to lose ?

iv been and bought a touran bumper and i’m having a go at painting for the first time ,

i am also in the proses of buildings the spare pd150 engine i have here some pictures i will be porting the cylinder head as the cylinder head is off so i don’t know why you wouldn’t !
Image

Image
Image
Image
Image
Image
Image
Image
Image


Sent from my iPhone using Tapatalk

Re: Build SDI to TDI

Posted: Sat Nov 28, 2020 9:17 pm
by Lcm evolution
hi again all,
today i had ago at painting the rear bumper
and collect a s3 intercooler ready to be fitted in the future

iv split both wing mirrors up i need to figure out how to fit the touran mirrors

soon i hope i get unlocked so i can see the how to section.

will update soon i will be skimming the head soon and starting to build the cylinder head up

Image
Image

Image


Sent from my iPhone using Tapatalk

Re: Build SDI to TDI

Posted: Sat Nov 28, 2020 9:57 pm
by sylwiu_3gta
Hello and wellcome! I see you already have big plans for the van, from an SDI to a PD150 ( also with mods from what I see😎) I think it's gonna be quite a difference. For sure I will keep an eye on your build. What other upgrades do you have for the engine?
Good luck with the build👍

Re: Build SDI to TDI

Posted: Sat Nov 28, 2020 10:14 pm
by Lcm evolution


hi There,

thanks i hope i will not disappoint iv built a good hand full off 300+bhp PD engines , from ground up , with this caddy i wont be going for big power at all really , everything i build is on a tight budget with everything being done my self saving a lot of money in labor.
I am thinking to run a fairly small turbo gt1856 maybe with a ball bearing conversion , but lets see what comes up i will upload everything here and post as many pictures as i can.

all the best mate and stay safe

Re: Build SDI to TDI

Posted: Sat Nov 28, 2020 10:45 pm
by Celticrsmith
How’s your colour match?

Re: Build SDI to TDI

Posted: Sun Nov 29, 2020 11:17 am
by Lcm evolution
I have not fitted yet due to the rain , but when i fit them i will upload a picture mate, Its my first time paining to i think the match maybe quite bad.
I do have a polish machine so maybe i can somehow get it to look some what ok.

keep an eye on the thread ! All the best mate

Re: Build SDI to TDI

Posted: Sun Nov 29, 2020 9:35 pm
by Lcm evolution
hi all,

Not much of an update,
iv finished porting the head may just need a polish but i will be skimming the head tomorrow.

here’s a few photos.
Image
Image
Image
Image


Sent from my iPhone using Tapatalk

Re: Build SDI to TDI

Posted: Sun Dec 06, 2020 8:58 pm
by Lcm evolution
hi followers
it’s been a few days

the head is built up now , and iv started to cut the hole in the block for the crank sensor i hope to soon have full access so i can find a better guide on how to fit touran wing mirrors as i have a set the engine should be all together this week

i am yet to collect mk5 gti seats and steering wheel
and also waiting for a delivery of side door rail covers
new wheels
and new turbo

i will add pictures of the parts once i get them
Image
Image


Sent from my iPhone using Tapatalk

Re: Build SDI to TDI

Posted: Mon Dec 07, 2020 11:09 pm
by Lcm evolution
hi again ,
quick update nothing special , collected some parts for the caddy this afternoon

gti front seats
gti steering wheel
gti gear knob
gti pedal covers
and a delivery of a new sliding door roller.

i have also started to cut the wing mirrors plates ready to start glueing to the touran mirrors , i still can’t find a guide so i’m just risking it and hoping for the best haha !

i’ll update you all as soon as i have made anymore progress.

Image
Image
Image
Image


Sent from my iPhone using Tapatalk

Re: Build SDI to TDI

Posted: Mon Dec 07, 2020 11:25 pm
by Scoobysrt
You need to request here mate https://www.caddy2k.com/forum/viewtopic.php?f=1&t=31039

Coming along nicely.

Re: Build SDI to TDI

Posted: Tue Dec 08, 2020 10:42 am
by Lcm evolution
Scoobysrt wrote:You need to request here mate https://www.caddy2k.com/forum/viewtopic.php?f=1&t=31039

Coming along nicely.
thanks for the help i have read and applied for the upgrade !

and thank you i should have some more pictures and info to add to the build in the upcoming weekend


Sent from my iPhone using Tapatalk

Re: Build SDI to TDI

Posted: Wed Dec 09, 2020 10:26 am
by Lcm evolution
progress on the wing mirrors
ImageImage


Sent from my iPhone using Tapatalk

Re: Build SDI to TDI

Posted: Wed Dec 09, 2020 12:27 pm
by caddymk4pt
Good Morning

is in a good way ... good luck

Re: Build SDI to TDI

Posted: Wed Dec 09, 2020 1:58 pm
by the swan fiend
Looking good mate! You don’t see too many SWB ex gas vans.
Have you got the engine back in yet?


Sent from my iPhone using Tapatalk