Build SDI to TDI
- Lcm evolution
- Caddy Fan
- Posts: 60
- Joined: Wed Nov 02, 2016 8:11 pm
- Engine size/power: 1.9 TDI (74bhp)
Re: Build SDI to TDI
mk5 gti gear stick ,
i have un stapled the original gaiter and re stapled to the caddy plastic Bessel , gearknob is used but was very cheap it will be ok for now.
really boring upgrade yesterday i hope to get new wheels this weekend and get the engine built up
Sent from my iPhone using Tapatalk
i have un stapled the original gaiter and re stapled to the caddy plastic Bessel , gearknob is used but was very cheap it will be ok for now.
really boring upgrade yesterday i hope to get new wheels this weekend and get the engine built up
Sent from my iPhone using Tapatalk
- Lcm evolution
- Caddy Fan
- Posts: 60
- Joined: Wed Nov 02, 2016 8:11 pm
- Engine size/power: 1.9 TDI (74bhp)
Re: Build SDI to TDI
gti seats , gearknob & steering wheel fitted today !
Sent from my iPhone using Tapatalk
Sent from my iPhone using Tapatalk
-
- 100BHP+
- Posts: 128
- Joined: Sun Dec 02, 2018 2:45 pm
- Engine size/power: 2.0 CR TDI (138bhp)
Re: Build SDI to TDI
Nice progress mate. Beeing a 2010, you have Immo4c clocks, so you can't code them with common tools.
Is there a reason to use the SDI intake instead of the ARL one? Porting the head will bring significant improvement in terms of power and torque?
Is there a reason to use the SDI intake instead of the ARL one? Porting the head will bring significant improvement in terms of power and torque?
Current built thread: 2013 SWB Caddy 2.0TDI
viewtopic.php?f=13&t=48634
My previous built: 2007 SWB Caddy 1.9TDI
viewtopic.php?f=13&t=39945
viewtopic.php?f=13&t=48634
My previous built: 2007 SWB Caddy 1.9TDI
viewtopic.php?f=13&t=39945
- Lcm evolution
- Caddy Fan
- Posts: 60
- Joined: Wed Nov 02, 2016 8:11 pm
- Engine size/power: 1.9 TDI (74bhp)
Build SDI to TDI
hi mate, the head was allready removed i do a lot of porting and quite enjoy it , it cost £0 and gives gains in all areas , low down torque high end torquesylwiu_3gta wrote:Nice progress mate. Beeing a 2010, you have Immo4c clocks, so you can't code them with common tools.
Is there a reason to use the SDI intake instead of the ARL one? Porting the head will bring significant improvement in terms of power and torque?
less back pressure = lower egt
less chance of head lift
more fuel efficiency and of course Bhp gains
i personally advise everybody to give it a try sometime especially if not in a rush to refit the head IE head gasket failure and no need to rush to get the car back up and running.
yes i do need to order a fvdi to program the clocks, as there isn’t anyone local to me that does this i don’t think
Sent from my iPhone using Tapatalk
- Lcm evolution
- Caddy Fan
- Posts: 60
- Joined: Wed Nov 02, 2016 8:11 pm
- Engine size/power: 1.9 TDI (74bhp)
Re: Build SDI to TDI
wing mirrors fitted , i think i may end up making another set soon as i’m not to happy with these
rear bumper fitted colour match isn’t prefect but it will do for now, if the weather picks up i will polish the van,
also fitted the touran door cards and i’m very pleased with them , the interior looks 100x better now
Sent from my iPhone using Tapatalk
rear bumper fitted colour match isn’t prefect but it will do for now, if the weather picks up i will polish the van,
also fitted the touran door cards and i’m very pleased with them , the interior looks 100x better now
Sent from my iPhone using Tapatalk
- Lcm evolution
- Caddy Fan
- Posts: 60
- Joined: Wed Nov 02, 2016 8:11 pm
- Engine size/power: 1.9 TDI (74bhp)
Re: Build SDI to TDI
cylinder head built and torqued down
Sent from my iPhone using Tapatalk
Sent from my iPhone using Tapatalk
-
- Caddy2k Groupie
- Posts: 9
- Joined: Wed Dec 16, 2020 11:29 am
Re: Build SDI to TDI
Loving the work! Inside looks a lot better with them seats and the new dash
- the swan fiend
- Hyper Poster
- Posts: 5143
- Joined: Sat Feb 18, 2017 10:52 pm
- Engine size/power: 1.6 CR TDI (102bhp)
Re: Build SDI to TDI
Looking good fella. I’m liking the colour coded engine
Sent from my iPhone using Tapatalk
Sent from my iPhone using Tapatalk
Rescue me from the swans in me
- Lcm evolution
- Caddy Fan
- Posts: 60
- Joined: Wed Nov 02, 2016 8:11 pm
- Engine size/power: 1.9 TDI (74bhp)
Re: Build SDI to TDI
been a few days , been busy preparing things for christmas i did get a set of wheels for the caddy and also the anti wobble bushs
Sent from my iPhone using Tapatalk
Sent from my iPhone using Tapatalk
-
- 100BHP+
- Posts: 189
- Joined: Sun Dec 20, 2020 4:08 pm
- Engine size/power: 1.6 CR TDI (102bhp)
Re: Build SDI to TDI
Looks good!
-
- 100BHP+
- Posts: 128
- Joined: Sun Dec 02, 2018 2:45 pm
- Engine size/power: 2.0 CR TDI (138bhp)
Re: Build SDI to TDI
Nice wheels mate. What specs do they have and from which Audi model ?
Current built thread: 2013 SWB Caddy 2.0TDI
viewtopic.php?f=13&t=48634
My previous built: 2007 SWB Caddy 1.9TDI
viewtopic.php?f=13&t=39945
viewtopic.php?f=13&t=48634
My previous built: 2007 SWB Caddy 1.9TDI
viewtopic.php?f=13&t=39945
- Lcm evolution
- Caddy Fan
- Posts: 60
- Joined: Wed Nov 02, 2016 8:11 pm
- Engine size/power: 1.9 TDI (74bhp)
Re: Build SDI to TDI
the wheels are 5x112 18” from a audi tt ssylwiu_3gta wrote:Nice wheels mate. What specs do they have and from which Audi model ?
Sent from my iPhone using Tapatalk
- Lcm evolution
- Caddy Fan
- Posts: 60
- Joined: Wed Nov 02, 2016 8:11 pm
- Engine size/power: 1.9 TDI (74bhp)
Re: Build SDI to TDI
it’s been a little to cold to be working outside , i got the n75 valve wire pinned to the correct ecu pin today i just used the egr valve wire as i won’t have an egr fitted ,
the engine is ready to bolt in just need to brave the weather
Sent from my iPhone using Tapatalk
the engine is ready to bolt in just need to brave the weather
Sent from my iPhone using Tapatalk
- Lcm evolution
- Caddy Fan
- Posts: 60
- Joined: Wed Nov 02, 2016 8:11 pm
- Engine size/power: 1.9 TDI (74bhp)
Re: Build SDI to TDI
the engine is in bolted straight in no issues at all , noticed the wire to the gearbox speed sensor is not as close on the 02m so i think i may need to extend
and the starter motor trigger wire plug is a different shape but i have a spare from a scrap mk4 golf
Sent from my iPhone using Tapatalk
and the starter motor trigger wire plug is a different shape but i have a spare from a scrap mk4 golf
Sent from my iPhone using Tapatalk
-
- Caddy2k Groupie
- Posts: 11
- Joined: Tue Dec 01, 2020 9:24 am
- Engine size/power: 1.9 TDI (104bhp)
Re: Build SDI to TDI
great work mate loving this thread, cant wait too see the finished product