Build SDI to TDI

Show off your caddy
User avatar
Lcm evolution
Caddy Fan
Posts: 56
Joined: Wed Nov 02, 2016 8:11 pm
Engine size/power: 1.9 TDI (74bhp)

Re: Build SDI to TDI

Post by Lcm evolution »

mk5 gti gear stick ,

i have un stapled the original gaiter and re stapled to the caddy plastic Bessel , gearknob is used but was very cheap it will be ok for now.

really boring upgrade yesterday i hope to get new wheels this weekend and get the engine built up Image



Sent from my iPhone using Tapatalk
User avatar
Lcm evolution
Caddy Fan
Posts: 56
Joined: Wed Nov 02, 2016 8:11 pm
Engine size/power: 1.9 TDI (74bhp)

Re: Build SDI to TDI

Post by Lcm evolution »

gti seats , gearknob & steering wheel fitted today ! Image
Image


Sent from my iPhone using Tapatalk
sylwiu_3gta
Caddy Fan
Posts: 88
Joined: Sun Dec 02, 2018 2:45 pm
Engine size/power: 1.9 TDI (104bhp)

Re: Build SDI to TDI

Post by sylwiu_3gta »

Nice progress mate. Beeing a 2010, you have Immo4c clocks, so you can't code them with common tools.
Is there a reason to use the SDI intake instead of the ARL one? Porting the head will bring significant improvement in terms of power and torque?
User avatar
Lcm evolution
Caddy Fan
Posts: 56
Joined: Wed Nov 02, 2016 8:11 pm
Engine size/power: 1.9 TDI (74bhp)

Build SDI to TDI

Post by Lcm evolution »

sylwiu_3gta wrote:Nice progress mate. Beeing a 2010, you have Immo4c clocks, so you can't code them with common tools.
Is there a reason to use the SDI intake instead of the ARL one? Porting the head will bring significant improvement in terms of power and torque?
hi mate, the head was allready removed i do a lot of porting and quite enjoy it , it cost £0 and gives gains in all areas , low down torque high end torque
less back pressure = lower egt
less chance of head lift
more fuel efficiency and of course Bhp gains

i personally advise everybody to give it a try sometime especially if not in a rush to refit the head IE head gasket failure and no need to rush to get the car back up and running.


yes i do need to order a fvdi to program the clocks, as there isn’t anyone local to me that does this i don’t think


Sent from my iPhone using Tapatalk
User avatar
Lcm evolution
Caddy Fan
Posts: 56
Joined: Wed Nov 02, 2016 8:11 pm
Engine size/power: 1.9 TDI (74bhp)

Re: Build SDI to TDI

Post by Lcm evolution »

wing mirrors fitted , i think i may end up making another set soon as i’m not to happy with these

rear bumper fitted colour match isn’t prefect but it will do for now, if the weather picks up i will polish the van,

also fitted the touran door cards and i’m very pleased with them , the interior looks 100x better now Image
Image
Image
Image


Sent from my iPhone using Tapatalk
User avatar
Lcm evolution
Caddy Fan
Posts: 56
Joined: Wed Nov 02, 2016 8:11 pm
Engine size/power: 1.9 TDI (74bhp)

Re: Build SDI to TDI

Post by Lcm evolution »

cylinder head built and torqued down Image
Image
Image
Image
Image


Sent from my iPhone using Tapatalk
Belsham87
Caddy2k Groupie
Posts: 9
Joined: Wed Dec 16, 2020 11:29 am

Re: Build SDI to TDI

Post by Belsham87 »

Loving the work! Inside looks a lot better with them seats and the new dash 👌🏻
User avatar
the swan fiend
Hyper Poster
Posts: 3740
Joined: Sat Feb 18, 2017 10:52 pm
Engine size/power: 1.6 CR TDI (102bhp)

Re: Build SDI to TDI

Post by the swan fiend »

Looking good fella. I’m liking the colour coded engine


Sent from my iPhone using Tapatalk
Rescue me from the swans in me
User avatar
Lcm evolution
Caddy Fan
Posts: 56
Joined: Wed Nov 02, 2016 8:11 pm
Engine size/power: 1.9 TDI (74bhp)

Re: Build SDI to TDI

Post by Lcm evolution »

been a few days , been busy preparing things for christmas i did get a set of wheels for the caddy and also the anti wobble bushs Image
Image


Sent from my iPhone using Tapatalk
IainH91
100BHP+
Posts: 189
Joined: Sun Dec 20, 2020 4:08 pm
Engine size/power: 1.6 CR TDI (102bhp)

Re: Build SDI to TDI

Post by IainH91 »

Looks good!
sylwiu_3gta
Caddy Fan
Posts: 88
Joined: Sun Dec 02, 2018 2:45 pm
Engine size/power: 1.9 TDI (104bhp)

Re: Build SDI to TDI

Post by sylwiu_3gta »

Nice wheels mate. What specs do they have and from which Audi model ?
User avatar
Lcm evolution
Caddy Fan
Posts: 56
Joined: Wed Nov 02, 2016 8:11 pm
Engine size/power: 1.9 TDI (74bhp)

Re: Build SDI to TDI

Post by Lcm evolution »

sylwiu_3gta wrote:Nice wheels mate. What specs do they have and from which Audi model ?
the wheels are 5x112 18” from a audi tt s


Sent from my iPhone using Tapatalk
User avatar
Lcm evolution
Caddy Fan
Posts: 56
Joined: Wed Nov 02, 2016 8:11 pm
Engine size/power: 1.9 TDI (74bhp)

Re: Build SDI to TDI

Post by Lcm evolution »

it’s been a little to cold to be working outside , i got the n75 valve wire pinned to the correct ecu pin today i just used the egr valve wire as i won’t have an egr fitted ,

the engine is ready to bolt in just need to brave the weather Image
Image
Image
Image
Image
Image
Image


Sent from my iPhone using Tapatalk
User avatar
Lcm evolution
Caddy Fan
Posts: 56
Joined: Wed Nov 02, 2016 8:11 pm
Engine size/power: 1.9 TDI (74bhp)

Re: Build SDI to TDI

Post by Lcm evolution »

the engine is in bolted straight in no issues at all , noticed the wire to the gearbox speed sensor is not as close on the 02m so i think i may need to extend

and the starter motor trigger wire plug is a different shape but i have a spare from a scrap mk4 golf

Image


Sent from my iPhone using Tapatalk
Caddyfab
Caddy2k Groupie
Posts: 11
Joined: Tue Dec 01, 2020 9:24 am
Engine size/power: 1.9 TDI (104bhp)

Re: Build SDI to TDI

Post by Caddyfab »

great work mate loving this thread, cant wait too see the finished product
Post Reply