Winst's caddy
- dan@biali
- Hyper Poster
- Posts: 3677
- Joined: Sun Mar 06, 2011 11:32 pm
- Engine size/power: 2.0 Stage 3+ TFSI
Re: Winst's caddy
I've had 2 MOTs with no washers and nothing has been said. I'm going to have washers retrofitted though as not a difficult or expensive job, well if you can find a Touran bumper to harvest the plastic guides that bond to the back!
- Winst
- Hyper Poster
- Posts: 619
- Joined: Wed Jul 17, 2013 10:19 pm
- Engine size/power: 2.0 CR TDI (138bhp)
- Location: Lake District
Re: Winst's caddy
Think I put a 10amp fuse in, it's been fine, but I think I'll change it just to be sureI.D.S. wrote:From memory think we upgraded to 20amp,the lights take a lot of current to start with.
Hopefully won't have any MOT bother but you never know, will probable end up doing the same Dan, are you going to be bringing that monster van up north to any shows? Wouldn't mind a good look round that beast.dan@biali wrote:I've had 2 MOTs with no washers and nothing has been said. I'm going to have washers retrofitted though as not a difficult or expensive job, well if you can find a Touran bumper to harvest the plastic guides that bond to the back!
2011 2.0tdi Full 2018 front and rear ends fitted, airlift 3P suspension, 20" alloys, modified Porsche calipers front and rear with R8 handbrake caliper, Audi RS4 wingbacks, covered in nappa leather and alcantara, Touran dash, door cards, centre console all trimmed in leather and alcantara, MFSW, 3D cluster, Rockford fosgate and focal sounds with MIB2, bi xenons, full alltrack kit fitted, etc etc:D
Instagram @2kwayne
Instagram @2kwayne
- dubstopjames
- 200BHP+
- Posts: 275
- Joined: Sun Sep 11, 2011 11:29 pm
Winst's caddy
Surely you can't fail if they aren't fitted?
The mot regs don't say they are required just they must work if fitted.

The mot regs don't say they are required just they must work if fitted.

- Winst
- Hyper Poster
- Posts: 619
- Joined: Wed Jul 17, 2013 10:19 pm
- Engine size/power: 2.0 CR TDI (138bhp)
- Location: Lake District
Re: Winst's caddy
Sounds promising for me by the sound of that mate thanks for that 
2011 2.0tdi Full 2018 front and rear ends fitted, airlift 3P suspension, 20" alloys, modified Porsche calipers front and rear with R8 handbrake caliper, Audi RS4 wingbacks, covered in nappa leather and alcantara, Touran dash, door cards, centre console all trimmed in leather and alcantara, MFSW, 3D cluster, Rockford fosgate and focal sounds with MIB2, bi xenons, full alltrack kit fitted, etc etc:D
Instagram @2kwayne
Instagram @2kwayne
-
I.D.S.
- Hyper Poster
- Posts: 1299
- Joined: Wed Oct 05, 2011 1:33 pm
Re: Winst's caddy
Sadly there is talk of that changing in the future,OEM an all that

- dan@biali
- Hyper Poster
- Posts: 3677
- Joined: Sun Mar 06, 2011 11:32 pm
- Engine size/power: 2.0 Stage 3+ TFSI
Re: Winst's caddy
That's interesting. I thought I read you needed them if you had xenon lights fitted but there was a grey area in regards retrofitted systems. And yes I'm really hoping that once the caddy is finished I'll be actually driving it to shows and meets all over the place.
- euan tdi
- Hyper Poster
- Posts: 512
- Joined: Sat Nov 22, 2008 11:56 am
- Engine size/power: 1.2 TSI (84bhp)
Re: Winst's caddy
TTRS brakes are on my list of "to do", vans looking great
2013 Highline 2.0 140, KW HLS kit, new set of Helios viewtopic.php?f=1&t=12710
- Winst
- Hyper Poster
- Posts: 619
- Joined: Wed Jul 17, 2013 10:19 pm
- Engine size/power: 2.0 CR TDI (138bhp)
- Location: Lake District
Re: Winst's caddy
euan tdi wrote:TTRS brakes are on my list of "to do", vans looking great
Thanks a lot Euan, when do we get to see your new van mate?
2011 2.0tdi Full 2018 front and rear ends fitted, airlift 3P suspension, 20" alloys, modified Porsche calipers front and rear with R8 handbrake caliper, Audi RS4 wingbacks, covered in nappa leather and alcantara, Touran dash, door cards, centre console all trimmed in leather and alcantara, MFSW, 3D cluster, Rockford fosgate and focal sounds with MIB2, bi xenons, full alltrack kit fitted, etc etc:D
Instagram @2kwayne
Instagram @2kwayne
- Winst
- Hyper Poster
- Posts: 619
- Joined: Wed Jul 17, 2013 10:19 pm
- Engine size/power: 2.0 CR TDI (138bhp)
- Location: Lake District
Re: Winst's caddy
Fitted electric, heated, & power fold with puddle light Touran mirrors at the weekend, thanks to Adam87 for all his help, top bloke.






2011 2.0tdi Full 2018 front and rear ends fitted, airlift 3P suspension, 20" alloys, modified Porsche calipers front and rear with R8 handbrake caliper, Audi RS4 wingbacks, covered in nappa leather and alcantara, Touran dash, door cards, centre console all trimmed in leather and alcantara, MFSW, 3D cluster, Rockford fosgate and focal sounds with MIB2, bi xenons, full alltrack kit fitted, etc etc:D
Instagram @2kwayne
Instagram @2kwayne
-
IN8
- Caddy Fan
- Posts: 66
- Joined: Tue Apr 21, 2015 3:14 pm
- Engine size/power: 1.8 20V Turbo
- Location: Ireland
Re: Winst's caddy
Is this still not for sale??

- Winst
- Hyper Poster
- Posts: 619
- Joined: Wed Jul 17, 2013 10:19 pm
- Engine size/power: 2.0 CR TDI (138bhp)
- Location: Lake District
Re: Winst's caddy
IN8 wrote:Is this still not for sale??![]()
![]()
![]()
2011 2.0tdi Full 2018 front and rear ends fitted, airlift 3P suspension, 20" alloys, modified Porsche calipers front and rear with R8 handbrake caliper, Audi RS4 wingbacks, covered in nappa leather and alcantara, Touran dash, door cards, centre console all trimmed in leather and alcantara, MFSW, 3D cluster, Rockford fosgate and focal sounds with MIB2, bi xenons, full alltrack kit fitted, etc etc:D
Instagram @2kwayne
Instagram @2kwayne
-
Caddyshack57
- 200BHP+
- Posts: 232
- Joined: Fri Jan 24, 2014 2:43 pm
- Engine size/power: 1.2 TSI (84bhp)
- Location: Staines
- Contact:
Re: Winst's caddy
What a lovely Caddy you got there Winst , some real nice mods , loving the mirrors , what they off? , I bet it took some fitting and a lot of dosh,,,,, but really sets it off
Well done
Well done
Last edited by Caddyshack57 on Mon Jul 13, 2015 12:00 am, edited 1 time in total.
- Winst
- Hyper Poster
- Posts: 619
- Joined: Wed Jul 17, 2013 10:19 pm
- Engine size/power: 2.0 CR TDI (138bhp)
- Location: Lake District
Re: Winst's caddy
Caddyshack57 wrote:What a lovely Caddy you got there Winst , some real nice modes , loving the mirrors , what they off? , I bet it took some fitting and a lot of dosh,,,,, but really sets it off
Well done
Thanks a lot mate, mirrors came off a facelift Touran, the bases needed to be plastic welded due to them being smaller than the caddy ones, then filled and primed and re textured, Adam87 off here is your man for the mirrors mate, and if you don't know anyone who can plastic weld, bean5 of here is Your man for that mate, seen some of his work, it's spot on. Can't think the last time I found a cheap mod for the caddy
2011 2.0tdi Full 2018 front and rear ends fitted, airlift 3P suspension, 20" alloys, modified Porsche calipers front and rear with R8 handbrake caliper, Audi RS4 wingbacks, covered in nappa leather and alcantara, Touran dash, door cards, centre console all trimmed in leather and alcantara, MFSW, 3D cluster, Rockford fosgate and focal sounds with MIB2, bi xenons, full alltrack kit fitted, etc etc:D
Instagram @2kwayne
Instagram @2kwayne
-
the long one
- Hyper Poster
- Posts: 610
- Joined: Sat Jan 19, 2013 8:03 pm
- Engine size/power: 1.9 TDI (104bhp)
- Location: plymouth
Re: Winst's caddy
What type of switch did you use to enable the power fold ? Any pics of this ?
Lovely van this and a nice colour !
Love the brakes too - fill the wheel gap well
Lovely van this and a nice colour !
Love the brakes too - fill the wheel gap well
104 bhp maxi - 6 speed o2q conversion - rcd 510 dab c/w Bluetooth & mdi - remap 162 bhp - facelift highline cluster - caddy 4 tail lights - 19” vw motorsport alloys - bilstein/eibach sportline suspension - r32 front brakes - scirocco front seats - caddy life centre console - mk6 flat bottom mfsw - caddy 4 folding mirrors
- Adam87
- Hyper Poster
- Posts: 2153
- Joined: Sat May 28, 2011 1:00 am
- Engine size/power: 1.2 TSI (84bhp)
Winst's caddy
Looking spot on Wayne! You've made a quick and quality turn around on them mirrors 

