Horace's Caddy
- zer0en
- Caddy2k Groupie
- Posts: 19
- Joined: Tue May 30, 2017 1:57 pm
- Engine size/power: 1.9 TDI (104bhp)
Re: Horace's Caddy
sweet van, and very inspirational thread. sux with the damages in the paint.. i recently bought my 2010 maxi, and after giving it the "new car wash" i found some scratches that was covered with those cheap crack filler sticks from turtle wax. the guy i bought it from claims this must have been done by the mechanics when it was on service the week before as he asked them to "detail" it. i picked it up, and as i signed in the contract that i had gone over the car, and bought it as it was presented, i dont have a chance in getting it covered by either him or the garage.. lesson learned i guess.
- horace01
- Hyper Poster
- Posts: 1376
- Joined: Sun Jan 26, 2014 3:20 am
- Engine size/power: 1.9 TDI (104bhp)
- Location: Melbourne Australia
Re: Horace's Caddy
Audi A3 vents arrived in the post today. Here is a photo of a quick test fit this evening. I think they look much better than the TT ones.
Sent from my HTC 2PS6200 using Tapatalk
Sent from my HTC 2PS6200 using Tapatalk
2007 Caddy 1.9 TDi 77kW BLS: R32 Wheel w/ paddle shifters : MK6 Golf GTi seats : Dynamat & carpeted : Reverse camera : Eonon GM5153 head unit : Avant Garde M220 18x8" Et 42 wheels :V-Maxx Xxtreme coilovers & rear shackles Gaz rear shocks : Mapped by DNA Tuning
Link to my build: viewtopic.php?t=19058" onclick="window.open(this.href);return false;
Link to my build: viewtopic.php?t=19058" onclick="window.open(this.href);return false;
-
- Caddy2k Groupie
- Posts: 29
- Joined: Wed Oct 12, 2016 12:46 pm
- Engine size/power: 1.4 16V Petrol (79bhp)
Re: Horace's Caddy
horace01 wrote: ↑Sat May 27, 2017 10:03 am It's been over 2 years since I fitted my Audi TT vents. At the time they were to be a temporary fitment until I got around to shaping the Audi A1 vents.
Anyway today I had a chance to make a little more progress.
They are coming along quite nicely I think. Still lots to do though.
Since taking these photos i have sanded it more and given the edge a paint. I'll keep putting up pictures as I progress.
I have just got myself a set of Audi A1 vents, how did you go about shaping them to fit them flush to the dash?
- horace01
- Hyper Poster
- Posts: 1376
- Joined: Sun Jan 26, 2014 3:20 am
- Engine size/power: 1.9 TDI (104bhp)
- Location: Melbourne Australia
Re: Horace's Caddy
I laid some masking tape down on them to give me the shape I needed then used a Dremal tool. It was however too difficult to keep the edge straight. I eventually used a bench top belt sander.billymtb wrote: I have just got myself a set of Audi A1 vents, how did you go about shaping them to fit them flush to the dash?
Im not sure if I'll bother finishing the other 3 vents a it's loads of work and I'm liking the A3 ones which are a perfect fit with no work at all.
Sent from my HTC 2PS6200 using Tapatalk
2007 Caddy 1.9 TDi 77kW BLS: R32 Wheel w/ paddle shifters : MK6 Golf GTi seats : Dynamat & carpeted : Reverse camera : Eonon GM5153 head unit : Avant Garde M220 18x8" Et 42 wheels :V-Maxx Xxtreme coilovers & rear shackles Gaz rear shocks : Mapped by DNA Tuning
Link to my build: viewtopic.php?t=19058" onclick="window.open(this.href);return false;
Link to my build: viewtopic.php?t=19058" onclick="window.open(this.href);return false;
- horace01
- Hyper Poster
- Posts: 1376
- Joined: Sun Jan 26, 2014 3:20 am
- Engine size/power: 1.9 TDI (104bhp)
- Location: Melbourne Australia
Re: Horace's Caddy
New vents in.
Sent from my HTC 2PS6200 using Tapatalk
Sent from my HTC 2PS6200 using Tapatalk
2007 Caddy 1.9 TDi 77kW BLS: R32 Wheel w/ paddle shifters : MK6 Golf GTi seats : Dynamat & carpeted : Reverse camera : Eonon GM5153 head unit : Avant Garde M220 18x8" Et 42 wheels :V-Maxx Xxtreme coilovers & rear shackles Gaz rear shocks : Mapped by DNA Tuning
Link to my build: viewtopic.php?t=19058" onclick="window.open(this.href);return false;
Link to my build: viewtopic.php?t=19058" onclick="window.open(this.href);return false;
- torque777
- Hyper Poster
- Posts: 5377
- Joined: Wed May 28, 2014 12:47 pm
- Engine size/power: 1.4 16V Petrol (79bhp)
- Location: Shropshire
Re: Horace's Caddy
I really like those... They look more factory fit, how exactly do you fit these
Sent from my F8331 using Tapatalk
Sent from my F8331 using Tapatalk
- Dingo
- Caddy2k Groupie
- Posts: 23
- Joined: Fri Jun 02, 2017 6:55 am
- Engine size/power: 1.8 20V Turbo
Re: Horace's Caddy
These are more natural - looks classy.
- horace01
- Hyper Poster
- Posts: 1376
- Joined: Sun Jan 26, 2014 3:20 am
- Engine size/power: 1.9 TDI (104bhp)
- Location: Melbourne Australia
Re: Horace's Caddy
Plug and play Nic. Saying that I had slightly filed down the lip in the dash where the vents fit, when I fitted the TT vents. Not sure if you would need to do so when fitting from scratch.torque777 wrote:I really like those... They look more factory fit, how exactly do you fit these
Sent from my F8331 using Tapatalk
Because the new vents are longer than the TT vents there seems to be no need to extend the length of them to meet the back of the ventilation ducts. Basically the airflow is strong enough without making the modification.
Also the new vents are the correct size for the holes. There is no need to mount the vents into the outer ring of the original Caddy vents as you do with the TT vents.
Thanks. I agree.Dingo wrote:These are more natural - looks classy.
Sent from my Nexus 9 using Tapatalk
2007 Caddy 1.9 TDi 77kW BLS: R32 Wheel w/ paddle shifters : MK6 Golf GTi seats : Dynamat & carpeted : Reverse camera : Eonon GM5153 head unit : Avant Garde M220 18x8" Et 42 wheels :V-Maxx Xxtreme coilovers & rear shackles Gaz rear shocks : Mapped by DNA Tuning
Link to my build: viewtopic.php?t=19058" onclick="window.open(this.href);return false;
Link to my build: viewtopic.php?t=19058" onclick="window.open(this.href);return false;
- torque777
- Hyper Poster
- Posts: 5377
- Joined: Wed May 28, 2014 12:47 pm
- Engine size/power: 1.4 16V Petrol (79bhp)
- Location: Shropshire
Re: Horace's Caddy
What A3 are they out of Scott? How do you remove old vents?
Sent from my F8331 using Tapatalk
Sent from my F8331 using Tapatalk
- horace01
- Hyper Poster
- Posts: 1376
- Joined: Sun Jan 26, 2014 3:20 am
- Engine size/power: 1.9 TDI (104bhp)
- Location: Melbourne Australia
Re: Horace's Caddy
Audi A3 S3 8V 2013 onwards
There seems to be 2 versions available. Standard and Chrome
These are the ones I got - Standard
Chrome
And the RS version
The Chrome and RS versions are available on Aliexpress if you want non genuine ones but they are all available 2nd had on eBay too.
Here is the link for vent removal:
viewtopic.php?t=11684&sid=a1720f0ad078b ... caa#p98129
Sent from my Nexus 9 using Tapatalk
There seems to be 2 versions available. Standard and Chrome
These are the ones I got - Standard
Chrome
And the RS version
The Chrome and RS versions are available on Aliexpress if you want non genuine ones but they are all available 2nd had on eBay too.
Here is the link for vent removal:
viewtopic.php?t=11684&sid=a1720f0ad078b ... caa#p98129
Sent from my Nexus 9 using Tapatalk
2007 Caddy 1.9 TDi 77kW BLS: R32 Wheel w/ paddle shifters : MK6 Golf GTi seats : Dynamat & carpeted : Reverse camera : Eonon GM5153 head unit : Avant Garde M220 18x8" Et 42 wheels :V-Maxx Xxtreme coilovers & rear shackles Gaz rear shocks : Mapped by DNA Tuning
Link to my build: viewtopic.php?t=19058" onclick="window.open(this.href);return false;
Link to my build: viewtopic.php?t=19058" onclick="window.open(this.href);return false;
- torque777
- Hyper Poster
- Posts: 5377
- Joined: Wed May 28, 2014 12:47 pm
- Engine size/power: 1.4 16V Petrol (79bhp)
- Location: Shropshire
Re: Horace's Caddy
Thanks
Sent from my F8331 using Tapatalk
Sent from my F8331 using Tapatalk
- crashnstick
- Caddy Fan
- Posts: 69
- Joined: Sun Nov 06, 2016 3:51 pm
- Engine size/power: 1.2 TSI (84bhp)
Re: Horace's Caddy
Do you have any links to the Aliexpress ones mate? Can only find trim rings?
- horace01
- Hyper Poster
- Posts: 1376
- Joined: Sun Jan 26, 2014 3:20 am
- Engine size/power: 1.9 TDI (104bhp)
- Location: Melbourne Australia
Re: Horace's Caddy
Sorry for the delay I have been away in Tonga kitesurfing for the last couple of weeks.crashnstick wrote:Do you have any links to the Aliexpress ones mate? Can only find trim rings?
I have checked all my Aliexpress links and they all say the product is nolnger available.
Sent from my Nexus 9 using Tapatalk
2007 Caddy 1.9 TDi 77kW BLS: R32 Wheel w/ paddle shifters : MK6 Golf GTi seats : Dynamat & carpeted : Reverse camera : Eonon GM5153 head unit : Avant Garde M220 18x8" Et 42 wheels :V-Maxx Xxtreme coilovers & rear shackles Gaz rear shocks : Mapped by DNA Tuning
Link to my build: viewtopic.php?t=19058" onclick="window.open(this.href);return false;
Link to my build: viewtopic.php?t=19058" onclick="window.open(this.href);return false;
-
- Caddy Fan
- Posts: 59
- Joined: Sat Jul 16, 2016 7:08 pm
- Engine size/power: 1.2 TSI (84bhp)
Re: Horace's Caddy
Do the S3 vents leave any visable gaps? looking at the ones you have look like there is a gap at the top or is it just the way it looks?
- horace01
- Hyper Poster
- Posts: 1376
- Joined: Sun Jan 26, 2014 3:20 am
- Engine size/power: 1.9 TDI (104bhp)
- Location: Melbourne Australia
Re: Horace's Caddy
You are correct in my picture there is a slight gap. I had just not pushed the vent in in properly. So once fitted correctly there is no gap.
2007 Caddy 1.9 TDi 77kW BLS: R32 Wheel w/ paddle shifters : MK6 Golf GTi seats : Dynamat & carpeted : Reverse camera : Eonon GM5153 head unit : Avant Garde M220 18x8" Et 42 wheels :V-Maxx Xxtreme coilovers & rear shackles Gaz rear shocks : Mapped by DNA Tuning
Link to my build: viewtopic.php?t=19058" onclick="window.open(this.href);return false;
Link to my build: viewtopic.php?t=19058" onclick="window.open(this.href);return false;