Alloy nuts
-
- 100BHP+
- Posts: 124
- Joined: Sun Aug 19, 2018 1:24 pm
- Engine size/power: 2.0 SDI (70bhp)
Alloy nuts
Just bought some Audi 17inch alloys. Can I use steel wheel bolts on these?
- NZDubNurd
- Hyper Poster
- Posts: 644
- Joined: Fri Oct 24, 2014 3:39 am
- Location: Whangarei, New Zealand
Re: Alloy nuts
They they are genuine Audi, they should have the same seat. Just double check the bolts are long enough, but they usually are.
- derMaD
- Caddy2k Groupie
- Posts: 37
- Joined: Thu May 18, 2017 2:35 pm
- Engine size/power: 2.0 CNG (107bhp)
- Location: Berlin
Re: Alloy nuts
As NZDubNurd wrote, you could use the oem-bolts, if they have the correct length.
It's important to use the specified (users manual) torque on the bolts with alloy wheels.
It's important to use the specified (users manual) torque on the bolts with alloy wheels.
Knowledge is very special: You don't have less if you share it.