Asz engine transplant
-
- Twin Turbo poster
- Posts: 340
- Joined: Thu Feb 14, 2013 3:36 pm
- Engine size/power: 1.0 TSI (100bhp)
Asz engine transplant
Right guys I and just go process off trying to get things together for transplant I am looking at engine from Srs which has had the crank seal swapped been done already, but I am trying to merge this with a auto gear box will this engine be fine or do I need to look for one off an auto. Also will every thing off my bls bolt on to this engine as they are saying it's plug and play
Cheers Gordon
Cheers Gordon
- Novakid
- Twin Turbo poster
- Posts: 407
- Joined: Sat Jan 12, 2019 7:34 am
Re: Asz engine transplant
Egr cooler wont bolt on as no holes for it on the asz block. Either make a plate or get the delete kit. Sure darkside developments sell one.
Picture of it attached to bls block
Sent from my SM-G965F using Tapatalk
Picture of it attached to bls block
Sent from my SM-G965F using Tapatalk
-
- Twin Turbo poster
- Posts: 340
- Joined: Thu Feb 14, 2013 3:36 pm
- Engine size/power: 1.0 TSI (100bhp)
Re: Asz engine transplant
Right spot will this need to be mapped out or just deleted or do I just make a bracket to hold it in place mate
- Novakid
- Twin Turbo poster
- Posts: 407
- Joined: Sat Jan 12, 2019 7:34 am
Re: Asz engine transplant
If removed a light will come on ( run fine ) believe it's about £70 to make it out the system the u need to modify the water line also if u remove it.
I am personally making a bracket just to keep it like for like. Can always remove at a later date when I have the money for map.
Sent from my SM-G965F using Tapatalk
I am personally making a bracket just to keep it like for like. Can always remove at a later date when I have the money for map.
Sent from my SM-G965F using Tapatalk
-
- Twin Turbo poster
- Posts: 340
- Joined: Thu Feb 14, 2013 3:36 pm
- Engine size/power: 1.0 TSI (100bhp)
Re: Asz engine transplant
This might sound bad but could you send me pic or drawing off bracket so I can have a look and where you going to attach it too you going to run the bls injectors and turbo or you running pd130 injectors and turbo will these run on original wire and that
- Novakid
- Twin Turbo poster
- Posts: 407
- Joined: Sat Jan 12, 2019 7:34 am
Re: Asz engine transplant
I have not made this bracket yet. But when u look at the block u will see 3 larger holes that are not In use. I am put a plate on with them and attaching the cooler to it.
Yeah I have put bls turbo and Injectors over already.
Sent from my SM-G965F using Tapatalk
Yeah I have put bls turbo and Injectors over already.
Sent from my SM-G965F using Tapatalk
- Novakid
- Twin Turbo poster
- Posts: 407
- Joined: Sat Jan 12, 2019 7:34 am
Re: Asz engine transplant
This 3
Sent from my SM-G965F using Tapatalk
Sent from my SM-G965F using Tapatalk
-
- Twin Turbo poster
- Posts: 340
- Joined: Thu Feb 14, 2013 3:36 pm
- Engine size/power: 1.0 TSI (100bhp)
Re: Asz engine transplant
Spot on mate going to start my own next week so just getting as much info as possible mate, once parts are swapped over and crank sensor sorted is just all plug and play mate
- Novakid
- Twin Turbo poster
- Posts: 407
- Joined: Sat Jan 12, 2019 7:34 am
Re: Asz engine transplant
Not that far on yet mate.
But it should be plug and play.
I only have the crank seal to fit and new timming belt and it's time to fit it.
Sent from my SM-G965F using Tapatalk
But it should be plug and play.
I only have the crank seal to fit and new timming belt and it's time to fit it.
Sent from my SM-G965F using Tapatalk
-
- Twin Turbo poster
- Posts: 340
- Joined: Thu Feb 14, 2013 3:36 pm
- Engine size/power: 1.0 TSI (100bhp)
Re: Asz engine transplant
Have you done the modification for sensor yet where crank seal goes in
- Novakid
- Twin Turbo poster
- Posts: 407
- Joined: Sat Jan 12, 2019 7:34 am
Re: Asz engine transplant
Yeah all done mate.
Sent from my SM-G965F using Tapatalk
Sent from my SM-G965F using Tapatalk
-
- Twin Turbo poster
- Posts: 340
- Joined: Thu Feb 14, 2013 3:36 pm
- Engine size/power: 1.0 TSI (100bhp)
Re: Asz engine transplant
Sorry for all questions, did you put new Bls seal in and is hard to do, also now that mod been done it should all basically just plug in and fire up with same clocks and everything is that correct
-
- Twin Turbo poster
- Posts: 340
- Joined: Thu Feb 14, 2013 3:36 pm
- Engine size/power: 1.0 TSI (100bhp)
Re: Asz engine transplant
Also you say that you using your bls injectors and your turbo what if you was to use asz injectors and turbo would it still be plug and play as you won't gain any power from using your standard turbo and injectors will you
-
- Twin Turbo poster
- Posts: 340
- Joined: Thu Feb 14, 2013 3:36 pm
- Engine size/power: 1.0 TSI (100bhp)
Re: Asz engine transplant
Also you running your caddy inter cooler
- Novakid
- Twin Turbo poster
- Posts: 407
- Joined: Sat Jan 12, 2019 7:34 am
Re: Asz engine transplant
Before I started this conversion I googled and researched every page out there and the questions u are asking have been covered 100 times..
I am running all my bls parts only difference is asz block.
U will need a re map if keeping asz turbo and Injectors.
Sent from my SM-G965F using Tapatalk
I am running all my bls parts only difference is asz block.
U will need a re map if keeping asz turbo and Injectors.
Sent from my SM-G965F using Tapatalk