Spud's Caddy Maxi build thread
- CaddyTeam1
- Caddy2k Groupie
- Posts: 41
- Joined: Mon Jun 24, 2019 11:32 pm
- Engine size/power: 2.0 CR TDI (138bhp)
Re: Spud's Caddy Maxi build thread
@Yvg Thank you! they are called Linea Corse LC818 mate. 19" et42.
Sent from my SM-G975F using Tapatalk
Sent from my SM-G975F using Tapatalk
- CaddyTeam1
- Caddy2k Groupie
- Posts: 41
- Joined: Mon Jun 24, 2019 11:32 pm
- Engine size/power: 2.0 CR TDI (138bhp)
Re: Spud's Caddy Maxi build thread
I have decided to make a start on the build in the back, the aim being able to travel around Europe next year on a budget for 3 weeks. Somewhere to store our stuff, sleep st night and somewhere to sit to eat etc.
I decided on a rough layout, I knew I wanted a bed and somewhere to sit, therefore I wanted some sort of pull out bed system, but retaining enough storage underneath.
Starting off with my shape, using just stud work timber and putting a mitre on each joint
Using the off cuts in each corner to give it a little extra strength.
Finally duplicating the setup so I can have an upper and a lower part.
Due to spend some more time on it at the weekend, updates to follow
Sent from my SM-G975F using Tapatalk
I decided on a rough layout, I knew I wanted a bed and somewhere to sit, therefore I wanted some sort of pull out bed system, but retaining enough storage underneath.
Starting off with my shape, using just stud work timber and putting a mitre on each joint
Using the off cuts in each corner to give it a little extra strength.
Finally duplicating the setup so I can have an upper and a lower part.
Due to spend some more time on it at the weekend, updates to follow
Sent from my SM-G975F using Tapatalk
-
- Twin Turbo poster
- Posts: 480
- Joined: Mon Sep 17, 2018 5:27 pm
- Engine size/power: 1.6 CR TDI (102bhp)
Re: Spud's Caddy Maxi build thread
Looks good ...You doing a box frame with bed slates on top ?
- CaddyTeam1
- Caddy2k Groupie
- Posts: 41
- Joined: Mon Jun 24, 2019 11:32 pm
- Engine size/power: 2.0 CR TDI (138bhp)
Re: Spud's Caddy Maxi build thread
@Gary.8 I am planning on boxing off the front section, then having bed slats at the back, with a pull out section for the full width bed.
Sent from my SM-G975F using Tapatalk
Sent from my SM-G975F using Tapatalk
-
- Twin Turbo poster
- Posts: 480
- Joined: Mon Sep 17, 2018 5:27 pm
- Engine size/power: 1.6 CR TDI (102bhp)
Re: Spud's Caddy Maxi build thread
Here's a idea that I did with mine that might help to make full use of the back section..
pull out bed section that doubles up as ajustable back rest with storage draw that doubles up as a table.
pull out bed section that doubles up as ajustable back rest with storage draw that doubles up as a table.
-
- Caddy2k Groupie
- Posts: 25
- Joined: Fri Oct 18, 2019 5:25 am
- Engine size/power: 1.9 TDI (104bhp)
Re: Spud's Caddy Maxi build thread
Very clever bedding system, looking forward to seeing it fitted. Going back a bit further in the thread, love the interior lighting. Think I might have to order some LED strip lights.
- CaddyTeam1
- Caddy2k Groupie
- Posts: 41
- Joined: Mon Jun 24, 2019 11:32 pm
- Engine size/power: 2.0 CR TDI (138bhp)
Re: Spud's Caddy Maxi build thread
@Gary.8 thanks for the ideas!! I do like the way you have the bed system there, especially how it's so versatile! How do you get the back rest to work like that??
Sent from my SM-G975F using Tapatalk
Sent from my SM-G975F using Tapatalk
- CaddyTeam1
- Caddy2k Groupie
- Posts: 41
- Joined: Mon Jun 24, 2019 11:32 pm
- Engine size/power: 2.0 CR TDI (138bhp)
Re: Spud's Caddy Maxi build thread
@Barfy its surprising the difference it has made, and how easy it was to fit.. highly reccomend doing it
Sent from my SM-G975F using Tapatalk
Sent from my SM-G975F using Tapatalk
-
- Twin Turbo poster
- Posts: 480
- Joined: Mon Sep 17, 2018 5:27 pm
- Engine size/power: 1.6 CR TDI (102bhp)
Re: Spud's Caddy Maxi build thread
There's two wooden runners underneath the slats where the draw goes to stop the slat section dropping down...
If you do a box frame there is plenty of other ways you can do the storage that works for you, like the second section I did as a chest .
If you do a box frame there is plenty of other ways you can do the storage that works for you, like the second section I did as a chest .
- BillyGilly
- Caddy Fan
- Posts: 85
- Joined: Sat Oct 26, 2019 8:22 pm
- Engine size/power: 2.0 CR TDI (108bhp)
Re: Spud's Caddy Maxi build thread
Looking smart!
BillyGilly
2016 2.0 TDI Bluemotion: viewtopic.php?f=13&t=40889&p=341148#p341148
2009 2.0 SDI: viewtopic.php?t=40416
2016 2.0 TDI Bluemotion: viewtopic.php?f=13&t=40889&p=341148#p341148
2009 2.0 SDI: viewtopic.php?t=40416
-
- Caddy2k Groupie
- Posts: 33
- Joined: Sun Sep 23, 2018 4:45 pm
- Engine size/power: 1.6 CR TDI (102bhp)
Re: Spud's Caddy Maxi build thread
Going backto the lighting again
Where did you get the translucent tubing from mate - it looks great , is it just a press fit or is it stuck in?
This got mounted inside a section of aluminium U channel fixed to the van with some translucent tubing pressed into the channel just to break up the light a little.
- CaddyTeam1
- Caddy2k Groupie
- Posts: 41
- Joined: Mon Jun 24, 2019 11:32 pm
- Engine size/power: 2.0 CR TDI (138bhp)
Re: Spud's Caddy Maxi build thread
@resra22
Tubing was from homebase or somewhere like that, so was the aluminium 'U' channel, I took tried different size tube until one fitted in well. Just tight push fit
Sent from my SM-G975F using Tapatalk
Tubing was from homebase or somewhere like that, so was the aluminium 'U' channel, I took tried different size tube until one fitted in well. Just tight push fit
Sent from my SM-G975F using Tapatalk
-
- Caddy Fan
- Posts: 73
- Joined: Mon Apr 08, 2019 9:17 am
Re: Spud's Caddy Maxi build thread
Looking smart! Did you fix the bed down at all?
Sent from my SNE-LX1 using Tapatalk
Sent from my SNE-LX1 using Tapatalk
- CaddyTeam1
- Caddy2k Groupie
- Posts: 41
- Joined: Mon Jun 24, 2019 11:32 pm
- Engine size/power: 2.0 CR TDI (138bhp)
Re: Spud's Caddy Maxi build thread
@chris577612 I haven't fixed it down yet, it seems fairly sturdy and wedged in the back, i will update a little more on it soon
Sent from my SM-G975F using Tapatalk
Sent from my SM-G975F using Tapatalk
- jmiller126
- Caddy2k Groupie
- Posts: 12
- Joined: Fri Jul 10, 2020 3:48 pm
- Engine size/power: 1.6 CR TDI (102bhp)
Re: Spud's Caddy Maxi build thread
Nice build @CaddyTeam1, how do you find the noise when driving without a bulkhead + insulated rear? I would love a bit more legroom but I don't want to lose too much cab refinement.