Toffee delights
- Azz03
- Hyper Poster
- Posts: 777
- Joined: Sat Sep 29, 2018 8:28 am
Re: Toffee delights
Lister79 as I say again mate they look top notch fully sets the back off now
Sent from my iPhone using Tapatalk
Sent from my iPhone using Tapatalk
- Lister79
- Hyper Poster
- Posts: 2132
- Joined: Fri Jan 20, 2017 8:38 pm
- Engine size/power: 2.0TSI EA888 Gen3
- Location: Lake District
Re: Toffee delights
Thanks lads I’m very happy with them.
Couldn’t help myself so made a start on the trimming, the side trims really tested my patience. Cant wait to do the others .
Sent from my iPhone using Tapatalk
Couldn’t help myself so made a start on the trimming, the side trims really tested my patience. Cant wait to do the others .
Sent from my iPhone using Tapatalk
2014 Toffee Brown with EA888 Gen 3 2.0 TSi (CJX) engine (417.5 BHP 545 Nm), Grinds/ABP air suspension and a few other mods
Build thread:
http://caddy2k.com/forum/viewtopic.php?f=13&t=36629
Build thread:
http://caddy2k.com/forum/viewtopic.php?f=13&t=36629
- brooneye
- Hyper Poster
- Posts: 1490
- Joined: Sun Jan 17, 2016 6:51 pm
- Engine size/power: 1.8 20V Turbo
Toffee delights
That’s took them to another level pal
Sent from my iPhone using Tapatalk
Sent from my iPhone using Tapatalk
Last edited by brooneye on Sat Dec 07, 2019 9:42 pm, edited 1 time in total.
- R22LRM
- 200BHP+
- Posts: 295
- Joined: Sun Aug 20, 2017 7:29 pm
- Engine size/power: 2.0 Stage 3+ TFSI
-
- Hyper Poster
- Posts: 506
- Joined: Wed Feb 21, 2018 7:02 am
- Engine size/power: 1.9 TDI (104bhp)
Re: Toffee delights
What a great build this is love the attention to detail. The colour is unique and makes the van look that bit more special as you most likely won’t see another one like it.
Just spent the last half hour/ 45 mins looking through this build until Tapatalk decided to crash.
Sent from my iPhone using Tapatalk
Just spent the last half hour/ 45 mins looking through this build until Tapatalk decided to crash.
Sent from my iPhone using Tapatalk
- Lister79
- Hyper Poster
- Posts: 2132
- Joined: Fri Jan 20, 2017 8:38 pm
- Engine size/power: 2.0TSI EA888 Gen3
- Location: Lake District
Re: Toffee delights
Thanks all, the comments are much appreciated.
Well I didn’t manage to get the seats finished today, still got the side covers to trim, so will be later in the week now.
Unfortunately my OCD got the better of me with wanting all the tilt release tabs on the same side (closest to siding door) . With the seats coming from a Touran one is closer to the drivers side, so it just doesn’t look right. Therefore I ended up stripping one of the seats back down to swap the frame over for one from my spare set, which then required the side covers cut and welded to suit (once trimmed in suede you’ll never know). I did manage to wrap the sliding handles and trim the backs though.
Sent from my iPhone using Tapatalk
Well I didn’t manage to get the seats finished today, still got the side covers to trim, so will be later in the week now.
Unfortunately my OCD got the better of me with wanting all the tilt release tabs on the same side (closest to siding door) . With the seats coming from a Touran one is closer to the drivers side, so it just doesn’t look right. Therefore I ended up stripping one of the seats back down to swap the frame over for one from my spare set, which then required the side covers cut and welded to suit (once trimmed in suede you’ll never know). I did manage to wrap the sliding handles and trim the backs though.
Sent from my iPhone using Tapatalk
2014 Toffee Brown with EA888 Gen 3 2.0 TSi (CJX) engine (417.5 BHP 545 Nm), Grinds/ABP air suspension and a few other mods
Build thread:
http://caddy2k.com/forum/viewtopic.php?f=13&t=36629
Build thread:
http://caddy2k.com/forum/viewtopic.php?f=13&t=36629
-
- Hyper Poster
- Posts: 1575
- Joined: Sun Oct 08, 2017 6:12 pm
- Engine size/power: 1.6 CR TDI (102bhp)
Re: Toffee delights
Take beautifully reupholstered seats , decide one little handle looks wrong, strip them back to the bare frames, a little bit of plastic welding and frame swapping, sorted!
With me it would have been ' handle is the wrong side.....looks lovely though!....get em in!'
Superb work fella.....this is what makes this forum so brilliant! If you pull up at a show, people would look all day long and not k ow about that!
It's like at Heff's place...barbell parked his next to mine (obviously until he asked me to #### off for a bit so he could photo his without mine in shot!) and I noticed the small gloss Black bits had a very subtle metal flake, only visible in certain lights, and only in small areas....when I asked him, a little smile crossed his face! "Santorini black mate....'
- Lister79
- Hyper Poster
- Posts: 2132
- Joined: Fri Jan 20, 2017 8:38 pm
- Engine size/power: 2.0TSI EA888 Gen3
- Location: Lake District
Re: Toffee delights
The things you do mate . Hopefully I’ll be able to sleep easier now knowing those tabs all match
Sent from my iPhone using Tapatalk
Sent from my iPhone using Tapatalk
2014 Toffee Brown with EA888 Gen 3 2.0 TSi (CJX) engine (417.5 BHP 545 Nm), Grinds/ABP air suspension and a few other mods
Build thread:
http://caddy2k.com/forum/viewtopic.php?f=13&t=36629
Build thread:
http://caddy2k.com/forum/viewtopic.php?f=13&t=36629
- brooneye
- Hyper Poster
- Posts: 1490
- Joined: Sun Jan 17, 2016 6:51 pm
- Engine size/power: 1.8 20V Turbo
Re: Toffee delights
Haha I thought I was bad, may I ask what the little cushions are in front of the turd?
Sent from my iPhone using Tapatalk
Sent from my iPhone using Tapatalk
- Lister79
- Hyper Poster
- Posts: 2132
- Joined: Fri Jan 20, 2017 8:38 pm
- Engine size/power: 2.0TSI EA888 Gen3
- Location: Lake District
Re: Toffee delights
They are the sections that you can remove to reveal the ISOFIX points.
Sent from my iPhone using Tapatalk
Sent from my iPhone using Tapatalk
2014 Toffee Brown with EA888 Gen 3 2.0 TSi (CJX) engine (417.5 BHP 545 Nm), Grinds/ABP air suspension and a few other mods
Build thread:
http://caddy2k.com/forum/viewtopic.php?f=13&t=36629
Build thread:
http://caddy2k.com/forum/viewtopic.php?f=13&t=36629
- Dav02
- Twin Turbo poster
- Posts: 392
- Joined: Thu Aug 09, 2018 10:11 pm
- Location: Lake District
Re: Toffee delights
laughing reading this comment, describes the man perfectly. An unbelievable fella by the way, but you don't even know the half of it!!!!Stedlocks wrote: ↑Mon Dec 09, 2019 10:36 am
Take beautifully reupholstered seats , decide one little handle looks wrong, strip them back to the bare frames, a little bit of plastic welding and frame swapping, sorted!
With me it would have been ' handle is the wrong side.....looks lovely though!....get em in!'
Superb work fella.....this is what makes this forum so brilliant! If you pull up at a show, people would look all day long and not k ow about that!
It's like at Heff's place...barbell parked his next to mine (obviously until he asked me to #### off for a bit so he could photo his without mine in shot!) and I noticed the small gloss Black bits had a very subtle metal flake, only visible in certain lights, and only in small areas....when I asked him, a little smile crossed his face! "Santorini black mate....'
-
- Hyper Poster
- Posts: 1575
- Joined: Sun Oct 08, 2017 6:12 pm
- Engine size/power: 1.6 CR TDI (102bhp)
Re: Toffee delights
I know he's a fell runner, and they, by their very make up, are not humanoid! He don't have blood coursing through his veins, its High quality oil!
-
- Caddy2k Groupie
- Posts: 20
- Joined: Mon Jun 18, 2018 9:31 pm
- Engine size/power: 2.0 Stage 3+ TFSI
- Contact:
Re: Toffee delights
Epic looking seats mate. Been following on instagram and loving the van. Where did you get the seat belts?
04 Caddy SWB
2.0 BYD DSG Swap 360bhp+
Instagram - @racecaddy
2.0 BYD DSG Swap 360bhp+
Instagram - @racecaddy
- Lister79
- Hyper Poster
- Posts: 2132
- Joined: Fri Jan 20, 2017 8:38 pm
- Engine size/power: 2.0TSI EA888 Gen3
- Location: Lake District
Re: Toffee delights
@Dav02, @Stedlocks I’m 100% normalish.
@m11xky they were done by Mid England retrims mate.
Sent from my iPhone using Tapatalk
@m11xky they were done by Mid England retrims mate.
Sent from my iPhone using Tapatalk
2014 Toffee Brown with EA888 Gen 3 2.0 TSi (CJX) engine (417.5 BHP 545 Nm), Grinds/ABP air suspension and a few other mods
Build thread:
http://caddy2k.com/forum/viewtopic.php?f=13&t=36629
Build thread:
http://caddy2k.com/forum/viewtopic.php?f=13&t=36629
- Lister79
- Hyper Poster
- Posts: 2132
- Joined: Fri Jan 20, 2017 8:38 pm
- Engine size/power: 2.0TSI EA888 Gen3
- Location: Lake District
Re: Toffee delights
Had a spare hour tonight so got the seat pad looms extended to a better position and 4 pin connector fit to make them easier to disconnect for when I remove the seats. Also fit some seat belt buttons to the base release tabs, I think it makes them look more OEM than without (well as OEM as yellow tabs could be).
Sent from my iPhone using Tapatalk
Sent from my iPhone using Tapatalk
2014 Toffee Brown with EA888 Gen 3 2.0 TSi (CJX) engine (417.5 BHP 545 Nm), Grinds/ABP air suspension and a few other mods
Build thread:
http://caddy2k.com/forum/viewtopic.php?f=13&t=36629
Build thread:
http://caddy2k.com/forum/viewtopic.php?f=13&t=36629