Mk IV Caddy 2.0 102 Startline BMT

Show off your caddy
Fensider
Caddy2k Groupie
Posts: 28
Joined: Mon Mar 30, 2015 8:10 pm
Engine size/power: 1.4 16V Petrol (74bhp)

Re: Mk IV Caddy 2.0 102 Startline BMT

Post by Fensider » Wed Apr 15, 2020 7:42 pm

Great looking Caddy mate
Mk4 Caddy Black Edition owner

ViralEye
Hyper Poster
Posts: 522
Joined: Sun Nov 25, 2018 8:10 pm
Engine size/power: 2.0 CR TDI (108bhp)
Location: Manchester

Re: Mk IV Caddy 2.0 102 Startline BMT

Post by ViralEye » Sun Apr 19, 2020 6:14 pm

So having bought puddle lights a good few months ago, it was time to get them fitted!!

With great difficulty I managed to dremmel out the holes which was by far the trickiest bit! I really wanted it to be perfect but I'll give it a 7 out of 10 Image

Taking the door cards and wing mirror was all relatively easy, but the. Feeding the loom through with the current wiring took me a bit to figure out.

Anyway, coded both doors, tested, refit everything and step back to admire my handy workImageImageImageImageImageImageImageImageImageImage

ViralEye
Hyper Poster
Posts: 522
Joined: Sun Nov 25, 2018 8:10 pm
Engine size/power: 2.0 CR TDI (108bhp)
Location: Manchester

Re: Mk IV Caddy 2.0 102 Startline BMT

Post by ViralEye » Mon Apr 20, 2020 5:41 pm

Ordered a new rail cover, but due to this Covid crap there was a delay, but today it finally arrived!!

Before and after below!ImageImage

RyanG94
Caddy2k Groupie
Posts: 44
Joined: Tue Apr 21, 2020 5:57 pm
Engine size/power: 1.0 TSI (100bhp)

Re: Mk IV Caddy 2.0 102 Startline BMT

Post by RyanG94 » Thu Apr 23, 2020 6:40 pm

Vans look amazing from where it started just a quick question the bumpers you had pained where they the original black plastic ones? Or did you have to buy new ones and get them pained?
Many thanks
Ryan

ViralEye
Hyper Poster
Posts: 522
Joined: Sun Nov 25, 2018 8:10 pm
Engine size/power: 2.0 CR TDI (108bhp)
Location: Manchester

Re: Mk IV Caddy 2.0 102 Startline BMT

Post by ViralEye » Thu Apr 23, 2020 6:53 pm

They were original black plastic mate. In the future I'll probably get them redone but for now they'll do

ViralEye
Hyper Poster
Posts: 522
Joined: Sun Nov 25, 2018 8:10 pm
Engine size/power: 2.0 CR TDI (108bhp)
Location: Manchester

Re: Mk IV Caddy 2.0 102 Startline BMT

Post by ViralEye » Fri May 08, 2020 10:29 pm

So a few people know I've had a few knocking issues with my BC racing coilovers so changed over to rubber top mounts instead.... And noise be gone!

ImageImageImageImageImageImageImage
Last edited by ViralEye on Fri May 08, 2020 10:29 pm, edited 1 time in total.

ViralEye
Hyper Poster
Posts: 522
Joined: Sun Nov 25, 2018 8:10 pm
Engine size/power: 2.0 CR TDI (108bhp)
Location: Manchester

Re: Mk IV Caddy 2.0 102 Startline BMT

Post by ViralEye » Fri May 08, 2020 10:30 pm

Forgot to say, alignment again on my monday too so will be good to see how they compare to the camber plates
Last edited by ViralEye on Fri May 08, 2020 10:30 pm, edited 1 time in total.

User avatar
Doc
Not God, just a bellend
Posts: 13843
Joined: Thu Jan 01, 1970 1:00 am
Engine size/power: 2.0TSI EA888 Gen3
Location: Monaghan, Ireland & Leicestershire, UK

Re: Mk IV Caddy 2.0 102 Startline BMT

Post by Doc » Sat May 09, 2020 12:07 am

Did you find anything that was obviously loose or worn on the adjustable top mounts?
Mine have been flawless for best part of three years but I will be rebuilding with new bearings soon.
Image
Image
2013 Caddy with EA888 Gen3 2.0TSI DSG, Superplus MSP19 , Caddy4 rear lights, Polo GTI (mk7 style) steering wheel, Relentless Tuning front coilovers, Audi A6 S-Line front seats, Boxster fronts & GTI rear Brakes, 3D Colour Premium dash cluster, Caddy life arm rest, Motexion bulkhead, MIB head unit


I have genuine VCDS Hex V2 & VagCAN Pro for any of your programming needs.

ViralEye
Hyper Poster
Posts: 522
Joined: Sun Nov 25, 2018 8:10 pm
Engine size/power: 2.0 CR TDI (108bhp)
Location: Manchester

Re: Mk IV Caddy 2.0 102 Startline BMT

Post by ViralEye » Sat May 09, 2020 11:32 am

Cannot find a single thing loose, hitting, or anything. Tried literally everything so can only put it down to noisy camber plates? But before I took the camber plates off they felt solid but I suppose me wiggling them about isn't going to replicate the noise I could hear

Annoying, but is what it is

Post Reply