Let the build begin - Plushed/Bagged VR6

Show off your caddy
User avatar
C Chis
Hyper Poster
Posts: 1655
Joined: Fri Mar 06, 2020 1:13 pm

Let the build begin

Post by C Chis »

So, as it’s been chucking it down outside this weekend I thought I’d spend some time in the back of the van...

Removed the old plywood panels

Image

Image


Lined the roof panel and fitted a set of LED’s and a switch to switch them between door control and off
Image

Image

Tried to keep the wiring on the back of the lining tidy and secure...

Image

Lined the sides and the plywood panel, brought the silver down so far and then brought the anthracite up to meet it, hopefully will look okay after a few MTB trips. The gap above the side door has also been bridged, see below Image

Image

Refitted the Powerfly bike clamp and changed the retaining cord, will replace with a lovely dark grey one when I get a chance.

Image

Sprayed the old grey bulkhead satin black to keep the theme going

Image

And as there was no beer in the house, I kept fuelled with..

Image

Still have to finish off the RHS, that’s a job for a dry day

So, what’s left on my list....

2. Headlight tweaks
3. Remap
5. New front seats
6. Trial fitting of a VW flip emblem reversing camera into a spare barn door(long term project!)
7. Retro retrims for the A pillars - now changed to hydro dipping Image
9. Dukes of Hazard air horns (so ‘70’s)
10. Electric window upgrade
11. Flat bottomed steering wheel, unsure yet which one
14. Centre console
15. Touran dash
16. Touran instrument cluster
17. Touran front bumper
18. Dye the cab headlining
19. Lowering kit
20. Engine cover
21. Passat interior light

N+1. Buy a newer Caddy and start again ImageImageImage

Only 4 new mods added to my list since the last update ImageImageImage

Sent from my iPad using Tapatalk
Last edited by C Chis on Mon Jan 11, 2021 7:14 pm, edited 1 time in total.
2010 pre-facelift Mk3 3.2 VR6 : Touran Interior : 3D Premium Clocks : R32 Bumper : Climatic A/C

My VR6 Build Thread and Details can be Found Here
User avatar
C Chis
Hyper Poster
Posts: 1655
Joined: Fri Mar 06, 2020 1:13 pm

Re: Let the build begin

Post by C Chis »

Pretty much finished the rear of my van, ready for some MTB adventures, great or small

Image


Sent from my iPad using Tapatalk
2010 pre-facelift Mk3 3.2 VR6 : Touran Interior : 3D Premium Clocks : R32 Bumper : Climatic A/C

My VR6 Build Thread and Details can be Found Here
User avatar
the swan fiend
Hyper Poster
Posts: 5131
Joined: Sat Feb 18, 2017 10:52 pm
Engine size/power: 1.6 CR TDI (102bhp)

Re: Let the build begin

Post by the swan fiend »

That’s a nice job mate. I like the MTB clamps.
I’ve just been using the holes in the side of the van and bungee cording my bike in. Yours looks much more professional.


Sent from my iPhone using Tapatalk
Rescue me from the swans in me
User avatar
C Chis
Hyper Poster
Posts: 1655
Joined: Fri Mar 06, 2020 1:13 pm

Re: Let the build begin

Post by C Chis »

Cheers Pete, getting quite excited to actually be able to start getting out from Friday morning (locally to start with) once lockdown restrictions are eased a little up here!

Van’s ready, I on the other hand... 8kgs of lockdown weight seems to have appeared overnight


Sent from my iPad using Tapatalk
2010 pre-facelift Mk3 3.2 VR6 : Touran Interior : 3D Premium Clocks : R32 Bumper : Climatic A/C

My VR6 Build Thread and Details can be Found Here
User avatar
C Chis
Hyper Poster
Posts: 1655
Joined: Fri Mar 06, 2020 1:13 pm

Let the build begin

Post by C Chis »

Hi [mention]Papa Bear [/mention] removed the rear door panel and had a look at the wiring for the reversing camera, there are 2 additional wires, cut one to remove the lines and cut the other to change the camera from a reversing one to a front viewing one

Sorry, can’t remember which wire does what and I’ve binned the instruction sheet.

They are the white and the turquoise wires. Can’t remember seeing them in the advert, however this is what they supplied

Image


Sent from my iPhone using Tapatalk
2010 pre-facelift Mk3 3.2 VR6 : Touran Interior : 3D Premium Clocks : R32 Bumper : Climatic A/C

My VR6 Build Thread and Details can be Found Here
User avatar
Papa Bear
Hyper Poster
Posts: 1885
Joined: Sun Mar 01, 2020 10:44 pm
Engine size/power: 1.6 CR TDI (102bhp)
Location: Hampshire, UK

Re: Let the build begin

Post by Papa Bear »

You are a star, thank you. Will order one and see what comes. Thanks
Caddy Maxi Life 1.6TDI 7 speed DSG 102bhp
Black

Marmite lover!!!
VCDS
User avatar
C Chis
Hyper Poster
Posts: 1655
Joined: Fri Mar 06, 2020 1:13 pm

Re: Let the build begin

Post by C Chis »




Sent from my iPad using Tapatalk
2010 pre-facelift Mk3 3.2 VR6 : Touran Interior : 3D Premium Clocks : R32 Bumper : Climatic A/C

My VR6 Build Thread and Details can be Found Here
User avatar
C Chis
Hyper Poster
Posts: 1655
Joined: Fri Mar 06, 2020 1:13 pm

Re: Let the build begin

Post by C Chis »

Today was another good day ImageImage

Local scrapyard opened up for the first time in 10 weeks, went looking for a Touran centre console, none to be had, the 2 Touran’s that they had had been miraculously stripped bare during lockdown, however, all was not lost....

Mrs C said, these look like nice seats, why not get these...

Image
2, as new half leather Audi Sline seats, heated - now I’ll have to hunt down the switches and wiring to make the heaters work Image
Will install them once I’ve gave them a clean.

And I picked up an old style 8 button leather MFSW and airbag too, needs a wee clean, but really quite nice. Now I’ll need to go back for the high line module as in my excitement I forgot to remove it, doh!!!
Wasn’t planning on the MFSW, however you can’t pass up a bargain now can you!

Image

And I picked up an Octavia interior light, need to check the LED colour and change if required.

Oh, and a as rare as hen’s teeth engine cover for my BLS engine, and after a wee clean...

Image

Tomorrow’s another day and another rummage round at the scrappy’s, awesome!


Sent from my iPad using Tapatalk
2010 pre-facelift Mk3 3.2 VR6 : Touran Interior : 3D Premium Clocks : R32 Bumper : Climatic A/C

My VR6 Build Thread and Details can be Found Here
User avatar
Papa Bear
Hyper Poster
Posts: 1885
Joined: Sun Mar 01, 2020 10:44 pm
Engine size/power: 1.6 CR TDI (102bhp)
Location: Hampshire, UK

Re: Let the build begin

Post by Papa Bear »

Wow, great haul
A pretty penny’s worth
Caddy Maxi Life 1.6TDI 7 speed DSG 102bhp
Black

Marmite lover!!!
VCDS
Tom-8-0
100BHP+
Posts: 131
Joined: Thu Aug 30, 2018 9:48 pm
Engine size/power: 1.6 CR TDI (102bhp)
Location: Fife, Scotland

Re: Let the build begin

Post by Tom-8-0 »

Wasn’t Upullit Inverkeithing by anychance was it @C Chis? The 1.6tdi Caddy that they have mysteriously lost its whole front end during lockdown also .


Sent from my iPhone using Tapatalk
Rhysjos
Caddy2k Groupie
Posts: 8
Joined: Wed Feb 07, 2018 9:34 pm
Engine size/power: 1.9 TDI (104bhp)

Re: Let the build begin

Post by Rhysjos »

Great Thread!! Really enjoyed reading this! I am currently about to order stretch carpet, stripped the whole inside today and got some new ply arriving, just done the rear seat conversion from the touran aswell, like you said the list gets bigger and bigger!! 😀😀
User avatar
C Chis
Hyper Poster
Posts: 1655
Joined: Fri Mar 06, 2020 1:13 pm

Re: Let the build begin

Post by C Chis »

[mention]Tom-8-0 [/mention] yeah it was, I had a wee look at the caddy too, pretty much stripped bare!

However, there are another few caddy’s sitting in the compound at the back waiting to come through once there is space form them. The place was packed full of cars, the fullest I’ve ever seen it.


Sent from my iPad using Tapatalk
2010 pre-facelift Mk3 3.2 VR6 : Touran Interior : 3D Premium Clocks : R32 Bumper : Climatic A/C

My VR6 Build Thread and Details can be Found Here
User avatar
C Chis
Hyper Poster
Posts: 1655
Joined: Fri Mar 06, 2020 1:13 pm

Re: Let the build begin

Post by C Chis »

[mention]Papa Bear [/mention] I only went through for the centre console

Got the lot including some parts off a Renault Traffic fro a mate for under £100, sorted!


Sent from my iPad using Tapatalk
2010 pre-facelift Mk3 3.2 VR6 : Touran Interior : 3D Premium Clocks : R32 Bumper : Climatic A/C

My VR6 Build Thread and Details can be Found Here
User avatar
C Chis
Hyper Poster
Posts: 1655
Joined: Fri Mar 06, 2020 1:13 pm

Re: Let the build begin

Post by C Chis »

[mention]Rhysjos [/mention] cheers! Yeah, I bought this van with the intention of doing absolutely nothing to it apart from kitting out the back for MTB coaching and riding, then I found this forum....

I’m going to update my wish list after I’ve fitted the seats, steering wheel, W8 light, electric windows, Touran bumper, fog lights and external cubby hole IPhone connection.


Sent from my iPad using Tapatalk
2010 pre-facelift Mk3 3.2 VR6 : Touran Interior : 3D Premium Clocks : R32 Bumper : Climatic A/C

My VR6 Build Thread and Details can be Found Here
User avatar
C Chis
Hyper Poster
Posts: 1655
Joined: Fri Mar 06, 2020 1:13 pm

Re: Let the build begin

Post by C Chis »

Today was a good day...

Removed these old things

Image


Fitted these really nice things...

Image

And removed, changed the midline module to a highline one and coded in the wheel Image

Skoda courtesy light to dip and fit, LED’s tested and they are red!
Image


So, how’s my never ending list of mods coming along...

2. Headlight tweaks - new headlights are here, parts on order
3. Remap - post lockdown
5. New front seats - complete
6. Trial fitting of a VW flip emblem reversing camera into a spare barn door(long term project!)
7. Retro retrims for the A pillars - now changed to hydro dipping Image
9. Dukes of Hazard air horns (so ‘70’s)
10. Electric window upgrade - waiting on wiring loom from Tommyzoom
11. Flat bottomed steering wheel, unsure yet which one - complete, MF leather one, not flat bottom
14. Centre console
15. Touran dash
16. Touran instrument cluster
17. Touran front bumper - got it, waiting on being painted
18. Dye the cab headlining
19. Lowering kit
20. Engine cover - complete
21. Passat interior light - LED’s are red, woohoo!!! Just need to hydrodip it before fitting

N+1. Buy a newer Caddy and start again ImageImageImage

Only 4 new mods added to my list since the last update ImageImage[emoji23


Sent from my iPad using Tapatalk
2010 pre-facelift Mk3 3.2 VR6 : Touran Interior : 3D Premium Clocks : R32 Bumper : Climatic A/C

My VR6 Build Thread and Details can be Found Here
Post Reply