Help - window conversion coding

Random Caddy chat.
Not the place for sale or wanted topics.
JStop
Caddy2k Groupie
Posts: 25
Joined: Tue Jun 16, 2020 7:27 pm
Engine size/power: 2.0 SDI (70bhp)
Location: Manchester

Help - window conversion coding

Post by JStop »

Hi, I have fitted the parts from a touran straight to the caddy!
Window regulators and motors, looms and door cards.
Ran the 12v feed from fusebox.

I just need to code them now. Does anybody know the long code so I can get these babies working??

I'll be forever grateful!

Thanks
danny6000xtr
Caddy2k Groupie
Posts: 9
Joined: Wed Jul 22, 2020 12:06 am
Engine size/power: 2.0 CR TDI (108bhp)
Contact:

Re: Help - window conversion coding

Post by danny6000xtr »

Same i have just done the same. need help coding them in. i can operate the windows via vcds but nothing on the door panel switch?
User avatar
Doc
Not God, just a bellend
Posts: 18445
Joined: Thu Jan 01, 1970 1:00 am
Engine size/power: 2.0TSI EA888 Gen3
Location: Monaghan, Ireland & Derbyshire, UK

Re: Help - window conversion coding

Post by Doc »

If everything is matched correctly, as in from the same donor vehicle, there should be no need for coding.
Image
Image
2013 Caddy with EA888 Gen3 2.0TSI DSG, Superplus MSP19 , Caddy4 rear lights, Polo GTI (mk7 style) steering wheel, Relentless Tuning front coilovers, Audi A6 S-Line front seats, Boxster fronts & GTI rear Brakes, 3D Colour Premium dash cluster, Caddy life arm rest, Motexion bulkhead, MIB head unit


All posts written by me are the intellectual property of the caddy2K forum and I do not consent to copying or redistribution of any sort
JStop
Caddy2k Groupie
Posts: 25
Joined: Tue Jun 16, 2020 7:27 pm
Engine size/power: 2.0 SDI (70bhp)
Location: Manchester

Re: Help - window conversion coding

Post by JStop »



Thanks

As my windows dont work! Does the convenience J519 module from the donor vehicle need to be replaced too?
Last edited by Doc on Wed Jul 29, 2020 5:24 pm, edited 1 time in total.
Reason: Removed unnecessary quote of entire previous post
User avatar
Doc
Not God, just a bellend
Posts: 18445
Joined: Thu Jan 01, 1970 1:00 am
Engine size/power: 2.0TSI EA888 Gen3
Location: Monaghan, Ireland & Derbyshire, UK

Re: Help - window conversion coding

Post by Doc »

I've never had to replace the convenience module and don't believe I've ever heard of anyone having to.
Image
Image
2013 Caddy with EA888 Gen3 2.0TSI DSG, Superplus MSP19 , Caddy4 rear lights, Polo GTI (mk7 style) steering wheel, Relentless Tuning front coilovers, Audi A6 S-Line front seats, Boxster fronts & GTI rear Brakes, 3D Colour Premium dash cluster, Caddy life arm rest, Motexion bulkhead, MIB head unit


All posts written by me are the intellectual property of the caddy2K forum and I do not consent to copying or redistribution of any sort
JStop
Caddy2k Groupie
Posts: 25
Joined: Tue Jun 16, 2020 7:27 pm
Engine size/power: 2.0 SDI (70bhp)
Location: Manchester

Re: Help - window conversion coding

Post by JStop »

Thanks for your help! Might have had a dodgy seller for the bits then, as I have everything in place and still dknt work!

Might have to start again!
danny6000xtr
Caddy2k Groupie
Posts: 9
Joined: Wed Jul 22, 2020 12:06 am
Engine size/power: 2.0 CR TDI (108bhp)
Contact:

Re: Help - window conversion coding

Post by danny6000xtr »

i managed to get the windows working by repinning the t28 grey connector, for the windows there is a brown earth, and two feeds for the windows and illumination feed
danny6000xtr
Caddy2k Groupie
Posts: 9
Joined: Wed Jul 22, 2020 12:06 am
Engine size/power: 2.0 CR TDI (108bhp)
Contact:

Re: Help - window conversion coding

Post by danny6000xtr »

JStop wrote: Wed Jul 29, 2020 5:36 pm Thanks for your help! Might have had a dodgy seller for the bits then, as I have everything in place and still dknt work!

Might have to start again!
If you still a struggling i can help you rewire the plug. Let me know. I have elsawin to help with wiring diagrams.
JStop
Caddy2k Groupie
Posts: 25
Joined: Tue Jun 16, 2020 7:27 pm
Engine size/power: 2.0 SDI (70bhp)
Location: Manchester

Re: Help - window conversion coding

Post by JStop »

Hey Danny, I'm confident the 12v feed is wired correctly and that my door harnesses are correct also! It's being taken for coding today so should be all good!

Thanks anyway
danny6000xtr
Caddy2k Groupie
Posts: 9
Joined: Wed Jul 22, 2020 12:06 am
Engine size/power: 2.0 CR TDI (108bhp)
Contact:

Re: Help - window conversion coding

Post by danny6000xtr »

how did it go does the windows now work?
JStop
Caddy2k Groupie
Posts: 25
Joined: Tue Jun 16, 2020 7:27 pm
Engine size/power: 2.0 SDI (70bhp)
Location: Manchester

Re: Help - window conversion coding

Post by JStop »

Not working yet! They've been coded, but I believe I have either the wrong motors or they're faulty!

I could do with reading values of the door modules to see if they're seeing the switch operation first, but I dont have diagnostic equipment that can perform live values!
JStop
Caddy2k Groupie
Posts: 25
Joined: Tue Jun 16, 2020 7:27 pm
Engine size/power: 2.0 SDI (70bhp)
Location: Manchester

Re: Help - window conversion coding

Post by JStop »

danny6000xtr wrote: Sun Aug 02, 2020 2:28 pm i managed to get the windows working by repinning the t28 grey connector, for the windows there is a brown earth, and two feeds for the windows and illumination feed
I have only just seen this.. the grey T28 connector in the A pillar? I fitted a 12v feed from the fusebox to the interior T28 connector, now I have my live and earth at the door module! Is there still something else that's needs to be done?
User avatar
C Chis
Hyper Poster
Posts: 1655
Joined: Fri Mar 06, 2020 1:13 pm

Re: Help - window conversion coding

Post by C Chis »

What are the part numbers from the door modules?


Sent from my iPad using Tapatalk
2010 pre-facelift Mk3 3.2 VR6 : Touran Interior : 3D Premium Clocks : R32 Bumper : Climatic A/C

My VR6 Build Thread and Details can be Found Here
danny6000xtr
Caddy2k Groupie
Posts: 9
Joined: Wed Jul 22, 2020 12:06 am
Engine size/power: 2.0 CR TDI (108bhp)
Contact:

Re: Help - window conversion coding

Post by danny6000xtr »

the connector i repinned was the connector from switches to motor, the way i found out is earthed few of the pins one by one and i found out the windows went down. i see if i can get a pin out for you
JStop
Caddy2k Groupie
Posts: 25
Joined: Tue Jun 16, 2020 7:27 pm
Engine size/power: 2.0 SDI (70bhp)
Location: Manchester

Re: Help - window conversion coding

Post by JStop »



That would be great! Thanks
Last edited by Doc on Wed Aug 05, 2020 11:33 am, edited 1 time in total.
Reason: Removed unnecessary quote of entire previous post
Post Reply