Toffee delights
-
- Caddy Fan
- Posts: 81
- Joined: Sun Jan 17, 2021 10:51 pm
- Engine size/power: 1.6 CR TDI (75bhp)
Re: Toffee delights
@Lister79 I have read this thread from beginning to end over a couple of evenings and have loved it.
There are many fantastic bits but my favourite is you GTD front seats and matching rears
I don’t currently have a caddy yet, I’ve only just ventured into VW ownership over the last 12 months as I bought a new Polo GTI in February last year. I love my Polo but have a real itch for a Caddy especially after seeing yours
There are many fantastic bits but my favourite is you GTD front seats and matching rears
I don’t currently have a caddy yet, I’ve only just ventured into VW ownership over the last 12 months as I bought a new Polo GTI in February last year. I love my Polo but have a real itch for a Caddy especially after seeing yours
2012 Caddy 1.6 TDI Match, lowered with Stance+ coilovers and 18“ John Brown steel wheels
- C Chis
- Hyper Poster
- Posts: 1657
- Joined: Fri Mar 06, 2020 1:13 pm
Re: Toffee delights
Or jotting it all down for their next mod
Keep the updates coming!
Sent from my iPad using Tapatalk
Keep the updates coming!
Sent from my iPad using Tapatalk
2010 pre-facelift Mk3 3.2 VR6 : Touran Interior : 3D Premium Clocks : R32 Bumper : Climatic A/C
My VR6 Build Thread and Details can be Found Here
My VR6 Build Thread and Details can be Found Here
-
- Hyper Poster
- Posts: 506
- Joined: Wed Feb 21, 2018 7:02 am
- Engine size/power: 1.9 TDI (104bhp)
Re: Toffee delights
Looking forward to how this all turns out. Keep the updates coming.
- Lister79
- Hyper Poster
- Posts: 2134
- Joined: Fri Jan 20, 2017 8:38 pm
- Engine size/power: 2.0TSI EA888 Gen3
- Location: Lake District
Re: Toffee delights
Thanks for the comments lads, and [mention]Nath&alex [/mention] thanks for taking the time to have a read through the build. Yeah the seats/interior is/was definitely my favourite part also.
Sent from my iPhone using Tapatalk
Sent from my iPhone using Tapatalk
2014 Toffee Brown with EA888 Gen 3 2.0 TSi (CJX) engine (417.5 BHP 545 Nm), Grinds/ABP air suspension and a few other mods
Build thread:
http://caddy2k.com/forum/viewtopic.php?f=13&t=36629
Build thread:
http://caddy2k.com/forum/viewtopic.php?f=13&t=36629
-
- 100BHP+
- Posts: 189
- Joined: Sun Dec 20, 2020 4:08 pm
- Engine size/power: 1.6 CR TDI (102bhp)
Re: Toffee delights
Hi Lister,
Have you wired in the fog lights on standard OEM stalk?
Also, the bonnet cable mod, where is the picture above? Assume engine bay, is it visible?
- Lister79
- Hyper Poster
- Posts: 2134
- Joined: Fri Jan 20, 2017 8:38 pm
- Engine size/power: 2.0TSI EA888 Gen3
- Location: Lake District
Re: Toffee delights
Hi mate my van has factory fit fog lights I just had to make up an adapter loom to connect the Golf MK7.5 led lights.
Yeah with the bonnet open standing in front of the van, if you look towards your knees you’ll see it clipped to the back of the slam panel.
Sent from my iPhone using Tapatalk
Yeah with the bonnet open standing in front of the van, if you look towards your knees you’ll see it clipped to the back of the slam panel.
Sent from my iPhone using Tapatalk
2014 Toffee Brown with EA888 Gen 3 2.0 TSi (CJX) engine (417.5 BHP 545 Nm), Grinds/ABP air suspension and a few other mods
Build thread:
http://caddy2k.com/forum/viewtopic.php?f=13&t=36629
Build thread:
http://caddy2k.com/forum/viewtopic.php?f=13&t=36629
-
- 100BHP+
- Posts: 189
- Joined: Sun Dec 20, 2020 4:08 pm
- Engine size/power: 1.6 CR TDI (102bhp)
Re: Toffee delights
Thank you for the quick reply.
Fog lights was an easy mod then. That bumper is on my list of things to do with fog lights.
Thanks, I will slap a cable tie around it as I have heard they break.
Looking at your post, I assume you can adjust the camber? Both front tyres are rubbing on the inner edge. It has stance coils on, not fitted by me so I assume its the chamber causing the problem.
Fog lights was an easy mod then. That bumper is on my list of things to do with fog lights.
Thanks, I will slap a cable tie around it as I have heard they break.
Looking at your post, I assume you can adjust the camber? Both front tyres are rubbing on the inner edge. It has stance coils on, not fitted by me so I assume its the chamber causing the problem.
- Lister79
- Hyper Poster
- Posts: 2134
- Joined: Fri Jan 20, 2017 8:38 pm
- Engine size/power: 2.0TSI EA888 Gen3
- Location: Lake District
Toffee delights
No worries mate. For the sake of a couple of minutes and a cable tie it’s well worth it.
Yeah my coil overs have adjustable top mounts so I can set the geometry up perfect. Have you had your tracking checked? as too much toe out is the most likely cause of your tyres knocking the inner edges off, at least that’s what I’d check first.
Sent from my iPhone using Tapatalk
Yeah my coil overs have adjustable top mounts so I can set the geometry up perfect. Have you had your tracking checked? as too much toe out is the most likely cause of your tyres knocking the inner edges off, at least that’s what I’d check first.
Sent from my iPhone using Tapatalk
2014 Toffee Brown with EA888 Gen 3 2.0 TSi (CJX) engine (417.5 BHP 545 Nm), Grinds/ABP air suspension and a few other mods
Build thread:
http://caddy2k.com/forum/viewtopic.php?f=13&t=36629
Build thread:
http://caddy2k.com/forum/viewtopic.php?f=13&t=36629
-
- 100BHP+
- Posts: 189
- Joined: Sun Dec 20, 2020 4:08 pm
- Engine size/power: 1.6 CR TDI (102bhp)
Re: Toffee delights
Will do, just need the weekend weather to improve! It is not rain its snow. I see you are from the Lakes, I am relocating to the lakes/Cumbria shortly.
I have not, its on the list to do. I didnt lower the van, and I work from home so barely drive. Due to the weather other than sorting the insides out, I have got underneath it yet.
I did know whether the hubs were camber adjustable. Stance coilovers wont have adjustable top mounts, so most likely will be tracking. I could string it up and measure it myself, but tracking for £40-£50 is easier haha
I have not, its on the list to do. I didnt lower the van, and I work from home so barely drive. Due to the weather other than sorting the insides out, I have got underneath it yet.
I did know whether the hubs were camber adjustable. Stance coilovers wont have adjustable top mounts, so most likely will be tracking. I could string it up and measure it myself, but tracking for £40-£50 is easier haha
Last edited by IainH91 on Sun Feb 07, 2021 8:39 am, edited 1 time in total.
- Lister79
- Hyper Poster
- Posts: 2134
- Joined: Fri Jan 20, 2017 8:38 pm
- Engine size/power: 2.0TSI EA888 Gen3
- Location: Lake District
Re: Toffee delights
Not a bad day on the van; got the engine out and made a start unwrapping the loom.
Sent from my iPhone using Tapatalk
Sent from my iPhone using Tapatalk
2014 Toffee Brown with EA888 Gen 3 2.0 TSi (CJX) engine (417.5 BHP 545 Nm), Grinds/ABP air suspension and a few other mods
Build thread:
http://caddy2k.com/forum/viewtopic.php?f=13&t=36629
Build thread:
http://caddy2k.com/forum/viewtopic.php?f=13&t=36629
- Azz03
- Hyper Poster
- Posts: 783
- Joined: Sat Sep 29, 2018 8:28 am
Re: Toffee delights
[mention]Lister79 [/mention] I guess there’s no going back now haha. I’ve just noticed you’ve even got carbon fibre gas struts on the bonnet. Haha every little detail
Sent from my iPhone using Tapatalk
Sent from my iPhone using Tapatalk
- Giddy
- Hyper Poster
- Posts: 2152
- Joined: Fri Aug 24, 2018 5:56 pm
- Engine size/power: 1.4TSI
- Location: Gloucestershire, UK
Re: Toffee delights
That's a good progress in a day. You gonna make it look too easy
- Lister79
- Hyper Poster
- Posts: 2134
- Joined: Fri Jan 20, 2017 8:38 pm
- Engine size/power: 2.0TSI EA888 Gen3
- Location: Lake District
Re: Toffee delights
[mention]Azz03 [/mention] it’s always the little things mate. There’s a “how to” if you fancy making yourself a carbon strut.
[mention]Giddy [/mention]I don’t know about that mate, suppose that’s what happens when you don’t sleep much
Sent from my iPhone using Tapatalk
[mention]Giddy [/mention]I don’t know about that mate, suppose that’s what happens when you don’t sleep much
Sent from my iPhone using Tapatalk
2014 Toffee Brown with EA888 Gen 3 2.0 TSi (CJX) engine (417.5 BHP 545 Nm), Grinds/ABP air suspension and a few other mods
Build thread:
http://caddy2k.com/forum/viewtopic.php?f=13&t=36629
Build thread:
http://caddy2k.com/forum/viewtopic.php?f=13&t=36629
- brooneye
- Hyper Poster
- Posts: 1491
- Joined: Sun Jan 17, 2016 6:51 pm
- Engine size/power: 1.8 20V Turbo
Re: Toffee delights
Your a brave man I remember having the dash and air box out and thinking what have done. Can’t wait for the next update buddy
Sent from my iPhone using Tapatalk
Sent from my iPhone using Tapatalk
- Azz03
- Hyper Poster
- Posts: 783
- Joined: Sat Sep 29, 2018 8:28 am
Re: Toffee delights
[mention]Lister79 [/mention] it sure is mate you always pull something mad out the bag yes I seen on your posts I will definitely be having a look into them. Thanks
Sent from my iPhone using Tapatalk
Sent from my iPhone using Tapatalk