turbine wheels

Random Caddy chat.
Not the place for sale or wanted topics.
Cabman
Caddy2k Groupie
Posts: 12
Joined: Wed Nov 10, 2021 7:04 pm
Engine size/power: 1.6 CR TDI (75bhp)

turbine wheels

Post by Cabman »

Hi guys im thinking of upgrading the wheels on my 2012 caddy i need to know if a set of scirocco 18 turbines would be a straight fit and speedo be ok
Vertex92
Caddy2k Groupie
Posts: 32
Joined: Mon Oct 04, 2021 11:11 pm
Engine size/power: 1.6 CR TDI (75bhp)

turbine wheels

Post by Vertex92 »

Hey mate

Literally just fitted a set of the scirocco interlagos onto mine and when straight on. As long as the studs and pcd match which should be 5 stud x 112 and the centre bore is the same they’re fine. I think centre bore is 57.1

Fitted mine to 11 plate. No problems either with the offset. I’ll ping a photo over at some point.

Also I checked Speedo with a couple of iPhone apps before and after and made around 1mph difference but I was 4mph out anyway (under obviously)

Along as the rolling diameter is less than 1% I think they’re normally ok. I remember I checked this myself and I think the rolling diameter was just under 1%. Just make sure you get the right tyres


Sent from my iPhone using Tapatalk
Cabman
Caddy2k Groupie
Posts: 12
Joined: Wed Nov 10, 2021 7:04 pm
Engine size/power: 1.6 CR TDI (75bhp)

Re: turbine wheels

Post by Cabman »

thanks for that mate id like to see a pic if possible :D
User avatar
Giddy
Hyper Poster
Posts: 2149
Joined: Fri Aug 24, 2018 5:56 pm
Engine size/power: 1.4TSI
Location: Gloucestershire, UK

Re: turbine wheels

Post by Giddy »

I'm fairly sure it's quite a few of them and lots of others in Caddy alloy thread https://www.caddy2k.com/forum/viewtopic.php?f=12&t=797
Caddy 4, Highline, 1.4 TSI
Instagram: @giddywagen
Build thread >>> here <<<
Vertex92
Caddy2k Groupie
Posts: 32
Joined: Mon Oct 04, 2021 11:11 pm
Engine size/power: 1.6 CR TDI (75bhp)

Re: turbine wheels

Post by Vertex92 »

Appreciate it’s dark will take another tomorrow Image


Sent from my iPhone using Tapatalk
Vertex92
Caddy2k Groupie
Posts: 32
Joined: Mon Oct 04, 2021 11:11 pm
Engine size/power: 1.6 CR TDI (75bhp)

Re: turbine wheels

Post by Vertex92 »

Here’s the code for what I fitted
3C8 601 025
8.0Jx18H2 Image


Sent from my iPhone using Tapatalk
Pinnacle100
Caddy Fan
Posts: 53
Joined: Sun Oct 15, 2017 8:51 pm

Re: turbine wheels

Post by Pinnacle100 »

19’s on mine and they are fine Image


Sent from my iPhone using Tapatalk
Vertex92
Caddy2k Groupie
Posts: 32
Joined: Mon Oct 04, 2021 11:11 pm
Engine size/power: 1.6 CR TDI (75bhp)

Re: turbine wheels

Post by Vertex92 »

Here’s a link I found useful for checking rolling diameters

https://alloywheels.com/tyreCalculator


Sent from my iPhone using Tapatalk
Post Reply